Force-field instability in surface grinding

In this paper, a particular kind of non-regenerative instability in surface grinding is studied. Clear evidences have been collected suggesting that vibrations can occur suddenly even during the first grinding pass, just after wheel dressing. These circumstances exclude workpiece and wheel surface regeneration as instability origin, whereas both surfaces have to be considered initially smooth. On these bases, the stability of the dynamic system constituted by an oscillating ideal wheel (namely without waviness on the surface) immerged in a positional and velocity-dependent process force field has been studied, demonstrating that, under particular conditions, the force field generates an unstable behaviour. The instability occurrence is strictly related to the oscillation direction of the wheel centre, according to the mode shape associated to the dominant resonance, with respect to the direction of the grinding force (identified by the ratio between its tangential and normal components). The analysis leads to the identification of a simple necessary condition for instability occurrence. The analytical results are confirmed by time-domain grinding simulations and compared with experimental evidences.     

Immiscible PHB/PBS and PHB/PBSA blends: morphology,phase composition and modelling of elastic modulus

This paper reports the thermal, morphological and mechanical properties of environmentally friendly poly(3-hydroxybutyrate) (PHB)/poly(butylene succinate) (PBS) and PHB/poly[(butylene succinate)-co-(butylene adipate)] (PBSA) blends, prepared by melt mixing. The blends are known to be immiscible, as also confirmed by the thermodynamic analysis here presented. A detailed quantification of the crystalline and amorphous fractions was performed, in order to interpret the mechanical properties of the blends. As expected, the ductility increased with increasing PBS or PBSA amount, but in parallel the decrease in the elastic modulus appeared limited. Surprisingly, the elastic modulus was found properly described by the rule of mixtures in the whole composition range, thus attesting mechanical compatibility between the two blend components. This unusual behavior has been explained as due to co-continuous morphology, present in a wide composition range, but also at the same time as the result of shrinkage occurring during sequential crystallization of the two components, which can lead to physical adhesion between matrix and dispersed phase. For the first time, the elastic moduli of the crystalline and mobile amorphous fractions of PBS and PBSA and of the mobile amorphous fraction of PHB at ambient temperature have been estimated through a mechanical modelling approach. © 2021 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.     

Microwave heating controlled reactive melt infiltration for graphite-Si-SiC ceramics manufacturing

In this work, we investigated a procedure which exploits microwave ovens to produce SiC- based components by reactive melt infiltration of silicon into graphite preforms. The employed oven is designed to grant optical access to the sample surface, which allows to measure its temperature evolution though a noncontact pyrometer. This signal was used as a feedback to control the power provided to the preform and as an experimental output whose analysis provides insight into the reaction mechanism. Specifically, it is found that complete infiltration is achieved much before the end of the reaction. The latter is not fully self-sustained as the global reaction rate continuously decreases with time until it is no more able to keep the temperature above the silicon solidification value. At that point, the reaction stops. The analysis of the processed samples proved that this procedure allows producing fully infiltrated samples without material failure by adjusting the heat provided during the infiltration stage rather than by tuning the preform structure and composition, which is the usual approach. The proposed method is less time and energy consuming than the standard one.     

Synthesis and characterization of the polyols by air oxidation of soybean oil and its effect on the morphology and dynamic mechanical properties of poly(vinyl chloride) blends

The use of natural additives, with low toxicity and good compatibility, for PVC is becoming increasingly attractive. In this study, soybean oil additives were prepared by air oxidation reactions and blending with PVC. The oxidation reaction produced a significant increase in the number of hydroxyl groups in soybean oil; however, this kind of reaction results in the formation of a heterogeneous structure due to free radical reactions in the medium. The oxidized soybean oil improved the compatibility with PVC due to an increase in the number of polar groups, such as hydroxyls, and thus a reduction in the amount of atactic polymer was observed. Furthermore, an increase in the molecular weight of the oxidized oil, as well as large amounts of polar groups contributes to reducing the migration of oil in the PVC. Regarding the crystallinity of PVC, the use of pure and oxidized soybean oil causes small changes in the crystalline phase of the polymer. Oxidized soybean oil has great potential for usage as a secondary plasticizer for PVC. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42102.     

Characterization of a High Capacity Multi-User Optical Access Network Using 1 Gb/s 16 QAM Subcarrier Multiplexing

Error free operation assuming common FEC techniques is experimentally demonstrated for a multi-user optical access network based on 40 channel DWDM-PON infrastructure and Gigabit Ethernet 16 QAM subcarrier multiplexing transmission. Such a system would support 400 users with symmetrical 1.25 Gb/s connections and media independent final connectivity. To replicate actual working conditions, the experimental setup relied only on commercially available components and was tested with realistic distance reach and high sub-channel load.     

Ergonomics, gerontechnology, and design for the home-environment

An ergonomic approach could improve the quality of life and activities in daily living. Gerontechnology reduces the effects of age-related impairments with technological devices and particular design for the home-environment. Physiological decline with increasing age renders the daily activities at home more difficult. This paper highlights some "common sense" and specific design suggestions in the entrance and kitchen, aimed to increase the self-sufficiency of elderly people. We suggest that gerontechnology may have a particular role in the improvement of comfort and safety for aged people.     

How to bring orphan genes into functional families

In the framework of the B1 Consortium of the EUROFAN-1 project, we set up a series of simple phenotypic tests that can be performed on a large number of strains at a time. This methodological approach was intended to help assign functions of putative genes coding for unknown proteins to several specific aspects of cell biology. The tests were chosen to study phenotypes which should be affected by numerous genes. In this report, we examined the sensitivity/resistance or the adaptation of the cell to physical or chemical stresses (thermotolerance, osmotolerance and ethanol sensitivity), the effects of the alteration of the level of protein phosphorylation (sensitivity or resistance to compounds affecting the activity of protein kinases or phosphatases) and the effects of compounds interfering with synthesis of nucleic acids or proteins. Deletions in 66 genes of unknown function have been tested in 21 different conditions. In many deletant strains, phenotypes were observed and, for the most promising candidates, tetrad analysis was performed in order to verify co-segregation of the deletion marker with the phenotype.     

Expression of CD2 on porcine B lymphocytes

BACKGROUND/AIMS: Deposition of paramagnetic substances in basal ganglia, resulting in increased signals in T1-weighted magnetic resonance images (bright basal ganglia), is frequently seen in liver cirrhosis. The present study describes the prevalence of bright basal ganglia and its clinical significance in patients with long-standing portal vein thrombosis in the absence of liver cirrhosis. METHODS: Six patients with angiographically proven complete portal vein thrombosis and cavernomatous transformation without signs of acute or chronic liver disease were studied by magnetic resonance imaging of the brain, neuropsychiatric evaluation, psychometric tests, electroencephalography, and determination of arterial ammonia levels and of serum manganese concentrations from peripheral venous blood. RESULTS: Five out of six patients demonstrated increased signal intensity in the basal ganglia. Overt portal-systemic encephalopathy was not noted prior to or at the time of evaluation. Normal EEG results were recorded in all patients. Only one of the six patients had pathological results in at least two out of four psychometric tests. This latter patient had had a large right-sided brain infarction. Arterial ammonia concentrations were normal in four of the six patients; one patient with increased ammonia levels had concomitant renal insufficiency with azotemia. The other four patients had no relevant concomitant diseases. Serum manganese levels were non-significantly increased compared with a control group (p=0.06), but they were significantly correlated to basal ganglia signal intensity (R=0.88; p=0.02). CONCLUSIONS: Our results demonstrate that bright basal ganglia primarily represent shunt-induced alterations. They are not directly associated with disturbed liver function nor with portal-systemic encephalopathy.     

Expression of multidrug resistance (mdr) gene(s) in primary lymphoid organs of chicken immune system during embryonic development

The present study investigated the processing of painful electrical stimuli in patients with unilateral frontal or parietal lobe damage and matched control subjects. Patients with frontal lesions showed increased pain thresholds when the stimuli were administered contralateral to the lesion. While the peak-to-peak amplitudes of the N150/P250 components of the somatosensory potentials increased linearly with stimulus intensity in the control subjects, the responses in the frontal group did not change significantly between stimulation at pain and tolerance threshold. There was no evidence for altered pain processing in patients with parietal lobe lesions. The findings of the present study support the hypothesis of an involvement of the frontal cortex in pain perception in humans.