计算机高速并行通信的实现方案

利用CPLD芯片实现单片机与ISA总线接口之间的高速并行通信，给出系统的总体设计方法及程序框图。采用这种通信方式，在12MHz晶振的MCS51单片机控制的数据采集系统中，可以满足与PCI04 ISA总线接口实时通信的要求，通信速率达200khit／s。在开发工具MAX plusⅡ下，完成了整个设计的输入、编译和仿真，达到了预期效果。本设计方案能够推广应用到计算机的高速并行通信中。     

TM1300多媒体DSP的百兆以太网通信接口的设计实现

主要研究TM1300多媒体数字信号处理器(DSP)在pSOS嵌入式操作系统下的100 Mbit/s高速以太网接口的设计与实现.硬件方面,介绍了TM1300系统与RTL8139以太网驱动芯片通过PCI总线互连的实现方式,重点介绍了其中PCI仲裁器的设计和PCI配置空间地址的设置方法;软件方面,介绍了在DSP端内嵌的pSOS操作系统下开发软件驱动RTL8139芯片的方法,重点描述了pSOS的pNA 网络组件的NI接口、RTL8139芯片收发数据的控制方式、驱动程序的发送缓存管理、TM1300访问PCI空间的途径以及内存与数据缓存一致性等要点.最后从速率、可靠性、效率3个方面对实现的以太网通信接口进行了测试,给出了详细的实测结果.测试结果显示,与基于RTL8029芯片开发的以太网接口相比,各项性能均有较大提高.     

Photoluminescence and X-ray Diffraction of Distributed Bragg Reflector

Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double- crystal X- ray diffraction measurement. The expected high quality epitaxial DBR structure was verified. In the X- ray double- crystal rocking curves of DBR the zeroth- order peak, the first and second order satellite peaks were measured. Splitting of diffraction peak appeared in the rocking curves was analyzed. The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.     

TCP/IP网络的动态模型描述

拥塞现象成为TCP/IP网络发展面临的一个重要问题。因此，拥塞控制对TCP/IP网络的鲁棒性和稳定性具有重要作用。目前，网络拥塞控制策略主要包括两类：端到端的控制机制，如TCP拥塞控制算法；网络内部的主动队列管理(AQM)策略。但由于缺乏对网络系统动态特性的了解，这些拥塞控制策略大都基于专家经验，并没有建立完整的理论分析框架。为此，本文从数据流的角度出发，通过建立网络基本单元状态方程模型来实现IP网络系统的数学解析模型，然后用混杂系统来描述TCP带有拥塞控制策略的数据传输过程，建立了TCP/IP网络的动态模型，为网络系统中动态性能的分析、拥塞控制策略的设计奠定了基础。实验结果表明，该数学模型与NS仿真实验的结果相一致。     

Frequency domain identification of Wiener models

This paper proposes a frequency domain algorithm for Wiener model identifications based on exploring the fundamental frequency and harmonics generated by the unknown nonlinearity. The convergence of the algorithm is established in the presence of white noise. No a priori knowledge of the structure of the nonlinearity is required and the linear part can be nonparametric.     

高精度非电起爆系统在围堰爆破拆除中的应用

高精度非电起爆系统在雷管精度、起爆可靠性、爆破减震作用等方面都有很大提高。本文介绍了构皮滩水电站导流洞进口围堰爆破拆除中采用非电起爆系统的情况,证明在水电工程的某些特殊爆破部位采用高精度非电起爆系统具有一定的优势。     

Position synchronization of multiple motion axes with adaptive coupling control

A new control approach to position synchronization of multiple motion axes is developed, by incorporating cross-coupling technology into adaptive control architecture. The control strategy is to stabilize position tracking of each axis while synchronizing its motion with other axes’ motions so that differential position errors amongst axes converge to zero. The proposed adaptive controller and parameter estimator employ coupling control by feeding back position errors and differential position errors, and have been realized to guarantee asymptotic convergence to zero of both position and synchronization errors. Simulations conducted on a multi-axis motion control system demonstrate the effectiveness of the method.     

Nonlinear model predictive control with polytopic invariant sets

Ellipsoidal invariant sets have been widely used as target sets in model predictive control (MPC). These sets can be computed by constructing appropriate linear difference inclusions together with additional constraints to ensure that the ellipsoid lies within a given inclusion polytope. The choice of inclusion polytope has a significant effect on the size of the target ellipsoid, but the optimal inclusion polytope cannot in general be computed systematically. This paper shows that use of polytopic invariant sets overcomes this difficulty, allowing larger stabilizable sets without loss of performance. In the interests of online efficiency, consideration is focused on interpolation-based MPC.