用于磁场测量的高精度500A/30V零压开关直流稳流电源

研制了一种带有无源辅助网络的全桥移相脉宽调制零压开关(FB PSPWMZVS)高精度磁铁稳流电源,并在电磁铁磁场测量中得到应用,其电流稳定度在8h内优于±1×10-4。     

基于矢量平均的信道估计算法

提出一种适用于DS-CDMA无线通信系统的低计算量而性能良好的信道估计算法。在DS-CDMA系统中，当接收信号经过解扩或多用户检测等时域预处理后，可以认为干扰大大减弱、期望信号在处理后的信号中占主要地位。这样，用预处理后信号相关阵的最大特征值对应的特征矢量可以很好地近似期望信号的信道矢量。但是，直接特征分解需要很大的计算量，特征跟踪计算量较低，但瞬态性能较差。本文提出一种基于相关矩阵列矢量平均的信道估计算法，该算法不需要特征分解或跟踪。仿真结果表明：新算法在降低计算量的情况下可以获得同直接特征分解方法几乎相同的性能。     

Supply-side hurdles in Internet B2C e-commerce: an empirical investigation

Given Hong Kong's special circumstances of small physical size, advanced infrastructure, and low shopping cost, a survey is designed under which supply-side problems in Internet business-to-consumer (B2C) e-commerce are indirectly revealed by responses on the demand side. Difficulties arising from the reluctance to answer questionnaires on the part of e-firms wary about trade and innovation secrets and their small number at the outset are thereby overcome. Survey data on demand-side obstacle factors in the form of perceived low e-shopping comparability, e-shopping inconvenience, e-transaction insecurity, and poor Internet privacy, together with orientation toward social interaction and low awareness on the part of consumers, translate into information on notionally matching supply-side hurdles. Regression analysis and hypothesis testing indicate statistical significance for the above hurdle factors in terms of impact on individual unwillingness to shop online. These results add to the inductive basis for future research into a general demand-supply theory of Internet B2C e-commerce and offer an empirically-grounded position against which the effects of later supply-side changes can be evaluated. Useful information also follows for engineer-managers seeking to compare marginal improvements in supply-side problems, particularly in the form of estimated substitution ratios.     

Modeling node mobility for reliable packet delivery in mobile ip networks

In this paper, we analyze node mobility for reliable packet delivery in mobile IP networks. In mobile IP, packets destined to roaming nodes are intercepted by their home agents and delivered via tunneling to their care of addresses (CoA). A mobile node may roam across multiple subnets. At each boundary crossing, a handoff is initiated such that the CoA is updated and a new tunnel is established. We consider both basic mobile IP handoff and smooth handoff. We find that reliable packet delivery in mobile IP networks can be modeled as a renewal process, because the retransmission over a new tunnel after each boundary crossing is independent of the previous history. We then derive the probability distribution of boundary crossings for each successful packet, based on which the packet reliable delivery time can be obtained. Our analytical model is derived based on a general distribution of residence time in a subnet and a general distribution of successful retransmission attempts in each subnet. The results can be readily applied to any distributions for both items. We also provide numerical examples to calculate the probability distribution of boundary crossings, and conduct simulations to validate our analytical results     

Effects of surface roughness of substrates on the c-axis preferred orientation of ZnO films deposited by r.f. magnetron sputtering

The c-axis preferred orientation of ZnO film is the most important factor for its successful application in piezoelectric devices. The effects of surface roughness of the substrate on the c-axis preferred orientation of ZnO thin films, deposited by radio frequency magnetron sputtering, were investigated. During sputtering, the oxygen content in the argon environment used was varied from 0 to 70% at a total sputtering pressure of 10 mTorr. Very smooth Si, smooth evaporated Au/Si, smooth evaporated-Al/Si, and rough sputtered-Al/Si were used as substrates. Their r.m.s. roughnesses, as measured by atomic force microscopy, were 1.27, 17.1, 21.1 and 65-118 Å, respectively. The crystalline structure and the angular spread of the (0 0* 2) plane normal to the ZnO films were determined using X-ray diffraction and X-ray rocking curves, respectively. The crystallinity and the preferred c-axis orientation of the ZnO films were strongly dependent on the surface roughness of the substrates rather than on the oxygen content of the working environment or on the chemical nature of the substrate.     

交互控制程序编程方法

交互控制是计算机程序的重要功能 ,也是实现人—机对话的基本途径。VisualBasic编程语言以其易学习掌握、开发灵活的特点而成为目前流行的程序开发工具 ,本文以VisualBasic语言为例介绍了交互控制程序编程方法 ,并对具体的每一种方法编写了相应的示例。     

厚膜永磁阵列微致动器的磁路研究

研究了厚膜永磁阵列微致动器中的磁场分布，并研究了永磁阵列单元几何尺寸对微致动器电磁力的影响。结果表明，厚膜永磁阵列单元高宽比和磁体单元间隔对微致动器电磁力影响较大磁徕单元高宽比为0．7是一个比较合适的尺寸。     

以3D软件应用为中心的设计管理模式——PDS在配管设计中的应用

由PDS的特点入手,结合工程实践的应用情况,阐明了3D软件可以更广泛的应用于配管的设计中,强调了以3D模型为中心开展设计和管理的新模式.     

XC气田烃类渗漏的生态环境问题探讨

利用中子活化法对四川盆地XC气田的天然气进行分析，发现其中含有20多种金属元素。通过剖面和观察点的观察分析，发现XC气田烃类渗漏，尤其是天然气泄漏对生态环境造成了较大的负面影响：改变浅表生态环境，造成植物生长发育异常，农作牧减产；降低土壤pH值，增加金属元素的水溶态，从而增加植物对其的吸收消化；同时，植物还能从天然气中直接吸收消化一些金属元素。因此，天然气泄漏使农作物吸收消化过多的有毒有害金属，损害农产品品质，应当引起严重关注。     

SCB火工品的研究与发展

文章评述了半导体桥火工品问世以来的研究成果与发展趋势。主要内容有半导体桥作用机理、半导体桥的结构与封装、半导体桥火工品的特点、半导体桥火工品的应用、半导体桥火工品的研究和发展趋势。