Synthesis and characterization of biocompatible hydroxyapatite coated ferrite

Ferrite particles coated with biocompatible phases can be used for hyperthermia treatment of cancer. We have synthesized substituted calcium hexaferrite, which is not stable on its own but is stabilized with small substitution of La. Hexaferrite of chemical composition (CaO)_0.75(La₂0₃)_0.20(Fe₂O₃)₆ was prepared using citrate gel method. Hydroxyapatite was prepared by precipitating it from aqueous solution of Ca(NO₃)₂ and (NH₄)₂HPO₄ maintaining pH above 11. Four different methods were used for coating of hydroxyapatite on ferrite particles. SEM with EDX and X-ray diffraction analysis shows clear evidence of coating of hydroxyapatite on ferrite particles. These coated ferrite particles exhibited coercive field up to 2 kOe, which could be made useful for hysteresis heating in hyperthermia. Studies by culturing BHK-21 cells and WBC over the samples show evidence of biocompatibility. SEM micrographs and cell counts give clear indication of cell growth on the surface of the sample. Finally coated ferrite particle was implanted in Kasaulli mouse to test its biocompatibility. The magnetic properties and biocompatibility studies show that these hydroxyapatite coated ferrites could be useful for hyperthermia.     

Electrochemical synthesis and characterization of chloride doped polyaniline

Chloride doped polyaniline conducting polymer films have been prepared in a protic acid medium (HCl) by potentiodynamic method in an electrochemical cell and studied by cyclic voltammetry and FTIR techniques. The FTIR spectra confirmed Cl^- ion doping in the polymers. The polymerization rate was found to increase with increasing concentration of aniline monomer. But the films obtained at high monomer concentration were rough having a nonuniform flaky polyaniline distribution. Results showed that the polymerization rate did not increase beyond a critical HCl concentration. Cyclic voltammetry suggested that, the oxidation-reduction current increased with an increase in scan rate and that the undoped polyaniline films were not hygroscopic whereas chloride doped polyaniline films were found to be highly hygroscopic.     

P(DBF-VA)型柴油低温流动性改进剂的研制

针对新疆地产柴油蜡含量较高的特点,以游离基聚合法合成了富马酸双链混合酯和醋酸乙烯酯共聚物型[P(DBF-VA)]柴油低温流动改进剂,利用正交实验研究了单体配比,引发剂用量,溶剂用量,聚合温度对聚合物降冷滤效果的影响。共聚物用IR进行表征,利用XRD初步探讨了该降凝剂的降凝机理。结果表明:该剂能使吐哈—10~#、0~#柴油冷滤点降低10℃和7℃;使独山子0~#柴油冷滤点下降12℃;使石化0~#柴油冷滤点下降8℃;使克拉玛依0~#柴油的冷滤点下降8℃。     

溶胶-凝胶法制备Na_2WO_4~-Mn/SiO_2催化剂及其甲烷氧化偶联反应性能的研究

采用溶胶-凝胶法制备了一系列5%Na2WO4-2%Mn/SiO2催化剂;用XRD、XPS、BET、O2-TPD和CO2-TPD等方法对催化剂进行了表征,并考察了对甲烷氧化偶联反应的催化性能。结果表明,与常规浸渍法相比,采用溶胶-凝胶法制备的Na2WO4-Mn/SiO2催化剂中W和Mn的原子浓度在催化剂表面和体相分布较为接近,而且两种制备方法所得的催化剂具有相似的催化性能,Na2WO4与α-方石英之间的相互作用,催化剂释放晶格氧的能力,碱性强弱是影响甲烷氧化偶联活性的关键因素。     

个性化公开密钥系统的设计

论文提出利用用户提供的个性化信息来随机产生关联大素数,保证了素数选取的随机化、个性化,提高了RSA算法的安全性。     

干涉型激光直写技术用于光盘防伪

利用作者研制的干涉型激光直写系统，阐述了干涉型激光直写设计OVD的方法，防伪特征，介绍了应用于光盘防伪的OVD技术和应用前景，给出了实验结果。     

磁场对石油污水管线钢的腐蚀行为研究

采用第3代永磁材料NdFeB(钕铁硼),研究了在施加永磁场条件下,模拟油田污水介质对20号钢的腐蚀过程,采用增重法、X射线衍射以及电化学方法对磁场作用下石油污水管线钢的腐蚀行为进行分析和评价。研究结果表明,磁场对Fe3O4的形成、自腐蚀电位正移幅度有促进作用,磁场对腐蚀产物的增重率影响较大,但它们与磁感应强度之间存在着极值关系。     

Lead-free piezoelectric ceramics with composition of (0.97−x)Na1/2Bi1/2TiO3-0.03NaNbO3-xBaTiO3

Compositions in (Na_1/2Bi_1/2)TiO₃ based ternary system, (0.97 – x) (Na_1/2Bi_1/2)TiO₃-0.03NaNbO₃-xBaTiO₃ (x = 0, 0.01, 0.02, 0.04, 0.05, 0.06, 0.08) are synthesized using conventional solid state reaction method. Influence of BaTiO₃ on crystal structure, dielectric and piezoelectric properties are investigated. All compositions can form single perovskite phase. Powder x-ray diffraction patterns can be indexed assuming a pseudo-cubic structure. Lattice constant increases with the increase of BaTiO₃ concentration. Rhombohedral distortion is observed in poled samples with BaTiO₃ concentration up to 6 mol%. Temperature dependence of dielectric constant and dissipation factor measurement reveals that all compositions experience two phase transitions: from ferroelectric to antiferroelectric and from antiferroelectric to paraelectric. Both transition temperatures, T _c and T _f, are lowered due to introduction of BaTiO₃. Ferroelectric to antiferroelectric phase transition has relaxor characteristics. Piezoelectric properties have relatively higher value around 1 mol% to 4 mol% BaTiO₃. In ceramics with x = 0.02, thickness electromechanical coupling factor (k _t) of 0.51 and piezoelectric charge constant (d ₃₃) of 110 × 10^–12 C/N are obtained. Addition of small amount of BaTiO₃ (x = 0.01, 0.02) improves piezoelectric properties compared to NBT-NN binary system, while T _f remains above 140°C, higher than that of NBT-BT binary system composition with similar piezoelectric properties. This is in favor of the possible application of them as lead-free piezoelectric ceramics.     

Thermomechanical finite-element model of shell behavior in continuous casting of steel

A coupled finite-element model, CON2D, has been developed to simulate temperature, stress, and shape development during the continuous casting of steel, both in and below the mold. The model simulates a transverse section of the strand in generalized plane strain as it moves down at the casting speed. It includes the effects of heat conduction, solidification, nonuniform superheat dissipation due to turbulent fluid flow, mutual dependence of the heat transfer and shrinkage on the size of the interfacial gap, the taper of the mold wall, and the thermal distortion of the mold. The stress model features an elastic-viscoplastic creep constitutive equation that accounts for the different responses of the liquid, semisolid, delta-ferrite, and austenite phases. Functions depending on temperature and composition are employed for properties such as thermal linear expansion. A contact algorithm is used to prevent penetration of the shell into the mold wall due to the internal liquid pressure. An efficient two-step algorithm is used to integrate these highly nonlinear equations. The model is validated with an analytical solution for both temperature and stress in a solidifying slab. It is applied to simulate continuous casting of a 120 mm billet and compares favorably with plant measurements of mold wall temperature, total heat removal, and shell thickness, including thinning of the corner. The model is ready to investigate issues in continuous casting such as mold taper optimization, minimum shell thickness to avoid breakouts, and maximum casting speed to avoid hot-tear crack formation due to submold bulging.