脉冲进气旋转喷吹技术的水力模拟

在铝合金熔体净化旋转喷吹技术的基础上 ,采用水力模拟实验研究了脉冲进气方式对气泡大小的影响。实验结果表明 :脉冲进气方式有利于产生射流 ,使气泡变小 ,并增加了气泡与熔体接触的比表面积 ,从而改善了除氢的动力学条件 ,有利于提高除氢效果。     

Effect of annealing treatment on electrochemical property of LiNi0.5Mn1.5O4 spinel

LiNi0.5Mn1.5O4 was prepared under different cooling conditions. The electrochemical properties of LiNi0.5Mn1.5O4 prepared under different cooling conditions were investigated. The results show that LiNi0.5Mn1.5O4 synthesized with or without annealing treatment has similar X-ray diffraction patterns that can be indexed to cubic spinel structure. The mass loss occurring above 650℃ during the heating process can be mostly gained during the cooling process. LiNi0.5Mn1.5O4 synthesized with an annealing treatment exhibits almost one voltage plateau at around 4.7 V and higher capacity with a quick fading upon cycling, whereas LiNi0.5Mn1.5O4 synthesized without annealing treatment shows two voltage plateaus at around 4.1 and 4.7 V and superior capacity retention upon cycling both at rates of 1/7C and 1 C, though the capacity is not high.     

蠕墨铸铁在铁道车辆制动系统中的应用研究

在分析车辆制动器摩擦温度场的基础上 ,研究蠕墨铸铁在铁道车辆制动系统中的使用性能 ;研究结果表明 ,在车辆制动器服役条件下 ,摩擦速度与接触压力的提高 ,摩擦副的摩擦系数显著降低 ,磨损率显著增加 ;在所研究的不同石墨形态的铸铁中 ,蠕墨铸铁不但具有低而稳定的磨损率 ,而且具有高而稳定的制动性能 ,是制造车辆制动器部件的合理选材。     

Continuous cleaning of A356 alloy melt using high frequency electromagnetic field

A set of device for electromagnetic separation (EMS) was designed and applied to process the continuous flowing melt. Tensile test was employed to compare effect of electromagnetic separation with that of the traditional processes. Compared with filtration by ceramic foam filter and process without filtration, multiple process combined with filtration and electromagnetic separation can effectively remove most of inclusions with diameter finer than 10μm in A356 alloy casting, hence improve its tensile properties. After being processed by electromagnetic filtration,the tensile strength of A356 scrap is enhanced by 8.27%, approaching the level of fresh A356 alloy.     

粉煤灰基混凝剂的制备及在大麻废水中的应用

采用酸溶法以粉煤灰为基础原料 ,通过添加一定量的硫铁矿烧渣 ,制备成粉煤灰基复合混凝剂 ,确定了最佳工艺条件 .实验结果表明 ,影响混凝剂制备的主要因素是粉煤灰与硫铁矿渣的质量比、酸用量、浸取时间和温度 .此混凝剂对大麻废水中 CODcr去除率达 88% ,色度去除率可达 96.6%以上 ,具有沉淀快和污泥体积小等优点 .     

大型全自动双工位吸塑机

介绍了一种新设计的大型全自动双工位吸塑机。介绍了该设备的主要组成部分，如正、负压箱机构，模具升降机构，加热控制系统，压料机构，振动脱模机构，自动控制电路系统，正压吹泡、正压托浮系统等。分析了设计中的注意要点和设备优点。     

用原子力显微镜观察菁染料聚集体

对应用原子力显微镜观察菁染料聚集体的文献进行了评述 ,在此基础上采用原子力显微镜观察了 2个感绿增感染料的聚集体     

天然沸石处理含铅、镉废水的试验研究

天然沸石经改性后对铅、镉有较好的吸附能力，当铅的浓度为2mg／L，沸石用量30g，动态变换3小时，吸附效率达90％以上，吸附容量达5mg／g；当镉的浓度为l00mg／L，沸石用量l0g，动态交换24小时，吸附效率可达99．8％以上。在450℃时处理的沸石吸附效果最佳，改性后的沸石对铜的吸附具有较好的选择性。     

烟草浸出液防治菜青虫及对蔬菜品质的影响

用四种不同浓度烟草浸出液防治菜青虫，与40％乐果比较。试验结果表明2倍液防治效果最好。杀虫率平均迭87．5％。以清水为对照。采用问接萃取比色法。做出烟碱的标准工作曲线。喷药24、48、72h后采集样品。测定其残留，4种浓度的残留均未检出。同时进行蔬菜生理指数的测定，结果显示喷药后叶绿素的含量显著增多。维生素C含量变化明显。     

5—烃基—2,3—二甲基吡嗪的合成

2,3-二基-5,6-二氢吡嗪与醛或酮在氢氧化钠的乙醇溶液中反应制得16种5-烃基-2,3-二甲基吡嗪。产率66%～90%。其中6种为新合成的化合物。产率17%～87.9%。