Indentation Thermal Shock Test for Ceramics

This paper presents an indentation-quench method to determine the resistance of ceramics to thermal cycling. The method defines a critical quench temperature difference, Δ T _c, based on a criterion which includes a minimum amount of crack growth and a minimum fraction of growing cracks. The method is applied to three different materials, which are ranked according to the individual values of Δ T _c. The variation of ΔT_c with different indentation loads and indentation positions is investigated. This technique uses a small number of specimens, avoids subsequent mechanical testing, and provides information about the ΔT C of the materials. The effect of repeated cycling on crack extension is also discussed.     

Students' conceptions of matter.

The aim of this study was to reveal how upper level compulsory school students (13 to 16 years old) conceptualize matter. Twenty individually administered interviews were carried out, transcribed word for word and analyzed in accordance with the phenomenographic approach adopted. Six distinctively different conceptions were found. Matter can be understood as (a) homogeneous substance, (b) substance units, (c) substance units with "small atoms," (d) aggregate of particles, (e) particle units, or (f) systems of particles. Differences in focus constitute a variation in the internal structure of each conception. There are also alternative forms of the same conception in some cases. The different conceptions, their varying internal structures, and the alternative forms of conceptions found are logically interrelated in a system, called the "outcome space," which depicts how thinking about matter may vary qualitatively between and within students. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Slip flow past a stretching surface

Summary The slip-flow of a Newtonian fluid past a linearly stretching sheet is considered. The partial slip is controlled by a dimensionless slip factor, which varies between zero (total adhesion) and infinity (full slip). An exact analytical solution of the governing Navier-Stokes equation is found, which is formally valid for all Reynolds numbers.     

Field test of superheater corrosion in a CFB waste boiler: Part I – Metal loss characteristics

The corrosion was investigated on a superheater test coil in a CFB waste boiler. The alloys ranged from ferritic steel T22 to nickel‐based Alloy 65 and the metal temperatures were between 460 and 540°C. The thickness of the deposit was alloy and temperature dependent. The low‐alloyed steels developed thick deposits at all temperatures while the deposit thickness increased with the temperature on the high‐alloyed steels and the nickel‐based alloy. The corrosion attack was alloy dependent and related to the deposit crest. The nickel‐based Alloy 65 was preferentially attacked directly under the crest of the deposit while the other alloys were preferentially attacked at the edge. The corrosion rate increased with temperature for X20, Alloy 304L, Alloy 310 and Alloy 825; decreased on Alloy 65; and was bell shaped on T22 and Alloy 28. Alloy 310 suffered from severe pitting corrosion in a line following the edge of the deposit crest. The best overall corrosion resistant alloy was Alloy 28.     

Density Measurements of Single Granules Using the Atomic Force Microscope

The density of single spray-dried granules has been determined with a new method based on atomic force microscopy (AFM). Spherical granules with a well-defined diameter are attached to the AFM cantilever, which acts as a beam-type spring, and the mass of a granule is estimated from the shift in the resonant frequency. The error of the measurements associated with the method was estimated to vary between 1% and 5%, depending on the size and shape of the granule. Density measurements of spray-dried WC–Co granules are presented, and the effect of a polymeric binder and dispersant on the consolidation during drying is discussed.     

Creep in phosphorus alloyed copper during power-law breakdown

During the first phase of storage, creep will take place in the copper canisters in the KBS-3 package for nuclear waste. The temperatures are below 100 °C, and the creep is well inside the power-law breakdown regime. Creep models for this situation have been developed. The analysed material is pure copper with about 50 ppm phosphorus. Constitutive equations for creep and other plastic deformation have been set up based on a generalised Norton expression and Kocks-Mecking’s model for the back stress. A model for the minimum creep rate based on fundamental principles for climb and glide has been derived. This model gives the correct order of magnitude for the creep rate in the temperature range from 400 to 20 °C without the use of fitted parameters. The creep exponent varies from 5 to 105 in this interval. The constitutive equations have also been formulated for multiaxial stress states.     

BeTelGeuse: A Platform for Gathering and Processing Situational Data

BeTelGeuse is an extensible data collection platform for mobile devices, which also automatically infers higher level context from sensor data. In this article, the authors introduce BeTelGeuse's architecture and current features, and evaluate its impact on mobile phone performance.     

The effect of phosphorus on creep in copper

Pure copper with an addition of about 50 ppm phosphorus is the planned material for the outer part of the waste package for spent nuclear fuel in Sweden. Phosphorus is added to improve the creep ductility but it also strongly increases the creep strength. In the present paper the influence of phosphorus on the strength properties of copper is analysed. Using the Labusch-Nabarro model it is demonstrated that 50 ppm has a negligible influence on the yield strength in accordance with observations. For slow moving dislocations, the interaction energy between the P-atoms and the dislocations gives rise to an agglomeration and a locking. The computed break away stresses are in agreement with the difference in creep stress of copper with and without P-additions.