Defining anchor lengths of steel and CFRP plates bonded to concrete

At Luleå University of Technology, research is taking place in the area of plate bonding, i.e. when concrete members are strengthened by bonding steel or fibre-reinforced plastic (FRP) plates to their surface. The research work started in 1988. Both comprehensive experimental work and theoretical work have been performed. This paper presents the results of tests performed on concrete prisms onto which steel or carbon-fibre-reinforced plastic (CFRP) plates have been bonded. The criteria for the necessary anchor lengths for both the materials are presented as well as the critical strain level in the concrete at failure. Tests are compared with the Volkerson theory for lap joints. The results from the tests show that there is a specific anchor length for each material used. The tests also show that the strain limit in the concrete is the governing factor for failure. Furthermore, a compression between test and theory shows that the derived elastic theory can be used for moderate levels of load.     

Lipase-catalyzed alcoholysis with supercritical carbon dioxide extraction 1: Influence of flow rate

A combined process of lipase (E.C. 3.1.1.3) catalysis and extraction of product with supercritical carbon dioxide was studied. The effect of different flow rates of the extraction fluid on the selective removal of the ethyl esters (EE) synthesized in a lipase-catalyzed alcoholysis of cod liver oil with ethanol was investigated. The faster the flow rate, the faster the extraction rate and the higher the recovery of EE. For example, after a 270-min extraction, the total recovery of EE was 1520 mg for a flow rate of 0.3 liter carbon dioxide at atmospheric pressure and room temperature/min (NL/min) as compared to 250 mg when 0.015 NL/min was used. The concentration of EE in the carbon dioxide was found to decrease with increasing flow rate, which indicates that the rate of diffusion of EE limits their extraction at fast flow rates. A high flow rate was found to result in a more selective extraction of EE, i.e., less amounts of other lipid components present in the reaction mixture were coextracted with the EE. Further, by increasing the flow rate, the equilibrium of the reaction was shifted slightly toward ester synthesis. An increase in the flow rate from 0.015 to 0.075 NL/min resulted in an approximately 10% increase in total conversion (from 73 to 82%), whereas only a negligible increase was obtained when the flow rate was increased further to 0.15 NL/min.     

Modulation of silica layer properties by varying the granulometric state of tetraethyl orthosilicate precursor aerosols during combustion chemical vapor deposition (CCVD)

Abstract

For the purpose of silica surface layer modulation, a pneumatic-controlled two-substance atomizer with inertia-based coarse droplet separation was operated at different system pressures for tetraethyl orthosilicate precursor aerosol supply during combustion chemical vapor deposition. A comprehensive testing study was performed to characterize the atomizer’s performance characteristics, initial precursor aerosols at the atomizer’s outlet, transformed aerosols before combustion, combustion aerosols and formed layers. Laser diffraction spectrometry, differential electrical mobility analyses and condensation particle counting were used for aerosol characterization with regard to particle size and particle production quantities. Layers were characterized by scanning electron microscopy, atomic force microscopy, spectral ellipsometry, water contact angle measurements and light transmission concerning geometric properties (thickness, surface structure and roughness) and physical behaviors (i.e., optical behaviors, hydrophobicity). Results show a quasi-linear relationship of the ejection mass flow of the pneumatic-controlled atomizer and geometric layer properties which again show a direct relationship to the physical properties. No correlation was found between the aerosols before combustion and the combustion aerosols since the majority of combustion aerosol particles are synthesized solely from the gas phase based on evaporated precursor material.

Copyright © 2020 American Association for Aerosol Research     

Alternating Cationic-Hydrophobic Peptide/Peptoid Hybrids: Influence of Hydrophobicity on Antibacterial Activity and Cell Selectivity

The influence of hydrophobicity on antibacterial activity versus the effect on the viability of mammalian cells for peptide/peptoid hybrids was examined for oligomers based on the cationic Lys-like peptoid residue combined with each of 28 hydrophobic amino acids in an alternating sequence. Their relative hydrophobicity was correlated to activity against both Gram-negative and Gram-positive species, human red blood cells, and HepG2 cells. This identified hydrophobic side chains that confer potent antibacterial activity (e. g., MICs of 2–8 μg/mL against E. coli) and low toxicity toward mammalian cells (<10 % hemolysis at 400 μg/mL and IC₅₀>800 μg/mL for HepG2 viability). Most peptidomimetics retained activity against drug-resistant strains. These findings corroborate the hypothesis that for related peptidomimetics two hydrophobicity thresholds may be identified: i) it should exceed a certain level in order to confer antibacterial activity, and ii) there is an upper limit, beyond which cell selectivity is lost. It is envisioned that once identified for a given subclass of peptide-like antibacterials such thresholds can guide further optimisation.     

Hit to Leads with Cytotoxic Effect in Leukemic Cells: Total Synthesis Intermediates as a Molecule Treasure Chest

A previously designed and developed 12-step total synthesis that includes [1,1′-biphenyl]-2-amine and carbazole intermediates and that ultimately produces the carbazole alkaloid carbazomycin G was exploited as a screening compound library with the goal of identifying potential lead compound(s) with cytotoxic effect. These compounds were investigated by using in-vitro tests involving the two human cell lines HL-60 and MOLM-13, which both model acute myeloid leukaemia (AML). The in-vitro biological test results were used together with the molecular structures of the various intermediates in a concise SAR analysis. Several of the intermediates revealed cytotoxicity (IC₅₀<10⁻⁴ M), although the final natural product carbazomycin G did not reveal cytotoxicity versus the two said human cell lines.     

New dendrimer-peptide host-guest complexes: towards dendrimers as peptide carriers

Adamantyl urea and adamantyl thiourea modified poly(propylene imine) dendrimers act as hosts for N-terminal tert-butoxycarbonyl (Boc)-protected peptides and form chloroform-soluble complexes. Investigations with NMR spectroscopy show that the peptide is bound to the dendrimer by ionic interactions between the dendrimer outer shell tertiary amines and the C-terminal carboxylic acid of the peptide, and also through host-urea to peptide-amide hydrogen bonding. The hydrogen-bonding nature of the peptide-dendrimer interactions was further confirmed by using Fourier transform IR spectroscopy, for which the NH- and CO-stretch signals of the peptide amide moieties shift towards lower wavenumbers upon complexation with the dendrimer. Spatial analysis of the complexes with NOESY spectroscopy generally shows close proximity of the N-terminal Boc group of the peptide to the peripheral adamantyl groups on the dendrimer host. The influence of side-chain motif on interactions with the host is analyzed by using seven different N-Boc-protected tripeptides as guests for the dendrimer. Downfield shifts of up to 1.3 ppm were observed for the guest amide NH-proton signals. These shifts decreased with increasing 'bulkiness' of the amino acid side chains. Despite this, the dendrimer was capable of making multiple peptide-dendrimer complexes when presented with a library of seven peptides. The different peptides were all present in the host, which did not show specific preferences, and could be released under mild acidic conditions. These results show the general nature of the peptide-dendrimer interactions in the formation of either single- or multiple-peptide-dendrimer complexes.     

Synthesis and characterization of dehydroabietic acid derivatives suitable for surfactant synthesis

The syntheses of derivatives of dehydroabietic acid suitable for further manipulation into surfactants are presented. The compounds are produced at very high yields and purity. They contain several different functional groups, e.g., carboxylic acid, amine, ester, alcohol, and an aromatic group. The functional groups are useful as the linking unit to the hydrophilic part in synthesizing surfactants.     

The influence of food emulsifiers on fat and sugar dispersions in oils. III. Water content,purity of oils

The influence of water on the interactions between fat and sugar crystals dispersed in triglyceride (vegetable) oils was qualitatively estimated from sedimentation and rheological experiments. The experiments were performed both with and without food emulsifiers (monoglycerides and lecithins) present in the oil. The effects of minor natural oil components (nontriglycerides) on the interactions and on emulsifier adsorption to the crystals were examined by comparing a commercial refined oil and a chromatographically purified oil. The results show that water generally increases the adhesion between fat and sugar crystals in oils and also increases the surface activity of the oil-soluble food emulsifiers. Minor oil components give a small increase in the adhesion between fat and sugar crystals in oils, but do not influence the adsorption of food emulsifiers in any systematic way.     

Phase structural analyses of polyethylene coatings on high‐density papers. III. Determination of the crystallite thicknesses by T1 measurements

Two different extrusion‐coating qualities of polyethylene, namely LDPE and HDPE, were coated on high‐density papers. Differences were observed with respect to their response to storage and low temperature heat treatment. HDPE does not respond to storage at ambient temperature and heat treatment in the same way as LDPE. The LDPE‐coating exhibits an increase in the monoclinic crystalline fraction at the paper surface as a result of heat treatment. The nature of this response appears to be a result of adhesion to a paper surface, the properties of this surface, orientation of polymer chains, and chain mobility differences. The increase of the monoclinic fraction is shown to relate to an increase of the mean crystallite thickness and initiation of new crystallites at the paper surface. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 235–241, 2004