Binding of cadmium,copper, and zinc to humic substances originating from municipal solid waste compost

The application of municipal solid waste (MSW) compost increases both the trace metal loading and the organic matter in the soil. To characterize the quality and metal-binding capacity of the compost OM, we extracted humic acid (HA) and fulvic acid (FA) from mature MSW compost and analyzed them for elemental composition, acid-titratable functional groups, total metal content, and structural components (by ¹³C NMR). HA constituted 67% of all extracted humic substances and differed significantly from HAs of cultivated lands: The compost HA exhibited smaller molecular size, a higher N content, and lower aromaticity due to large amounts of saturated aliphatic components. Metal complexation studies of the extracted HA and FA were performed by equilibrium dialysis titration. The complexing capacity (CC) was highest for Cu: CC_HA = 3357 and CC_FA = 5221 μmol Cu g⁻¹ of dissolved organic carbon (DOC) at pH 5. Zn and Cd were bound (at pH 7) in smaller concentrations: CC_HA(Zn) = 2167, CC_FA(Zn) = 2809, CC_HA(Cd) = 2386, and CC_FA(Cd) = 2468 μmol metal g⁻¹ of DOC. Stability constants for binding on the strongest sites (pK_int) were determined as pK_intHA = 6.6 and pK_intFA = 7.3 for Cu at pH 5; and pK_intHA = 8.0 and pK_intFA = 6.4 for Cd at pH 7. Since these measured parameters fall within the ranges of values obtained for soil humic substances, we conclude that in soils with little organic matter, compost addition will significantly increase the amount of highly reactive organic complexing agents for trace metals in the soil.     

Mechanical Properties of Large Arteries in Mother and Fetus during Normal and Diabetic Pregnancy

Cardiodilatin (CDD)/atrial natriuretic peptide (ANP) is a 28-amino acid peptide hormone known to be synthesized in the heart of a large number of different vertebrates. It plays an important role in the regulation of blood pressure and natriuresis/diuresis. Since the cardiovascular system of the horse has to meet the highest requirements concerning its physiological performance, we intended to characterize the cardiodilatin/atrial natriuretic peptide system of this species. By means of immunohistochemistry and immunoelectron microscopy, we precisely identified auricular cardiocytes as the loci of CDD/ANP synthesis. Using aortic smooth muscle relaxation assay and CDD/ANP-ELISA, we succeeded in isolating the biologically active prohormone. We subsequently cloned the equine cDNA of the CDD/ANP precursor protein and deduced its primary sequence. The entire precursor protein is in good agreement with the CDD/ANP prohormones of other mammals. The deduced theoretical average Mr of equine CDD/ANP-1-126 is 13,764, corresponding to the molecular weight of purified peptide determined by ESI-MS. Our findings suggest that equine CDD/ANP is produced in auricular cardiocytes and the predominant storage form of CDD/ANP in the auricle is the prohormone CDD/ANP-1-126.     

Buchbesprechungen

Ohne Zusammenfassung     

Numerical analysis of IPIRG cracked pipe experiments subjected to dynamic and cyclic loading

This report contains results of a finite element study aiming to identify the influence of loading history and geometry for cracked pipes subjected to complex loading. The experiments have been performed within the International Piping Integrity Research Group (IPIRG) Program. The majority of the numerically analyzed experiments were conducted on straight pipes with an outside diameter of 168 mm and containing a large circumferential through-wall crack. The considered pipes were loaded in four-point bending under displacement control and at a temperature of 288°C. The types of loading were combinations of either quasi-static or dynamic and also monotonic or cyclic loading with different loading ratios R. Some analyses were also performed on surface-cracked pipes subjected to slow, monotonic loading.

In the finite element study, 20-node solid elements were used for the through-wall cracked pipes and a combination of shell and non-linear line spring elements for the surface-cracked pipes. Stable crack growth was simulated by gradual node relaxation and crack closure is accounted for by using simple contact elements. The J-integral for a remote contour is calculated and used as a characterizing fracture parameter although the cyclic loading violates the theoretical basis for this procedure. The near-tip J can not be used for growing cracks because of the weak energy singularity. The results of the numerical study confirm the trends from the experiments in that a high loading rate has a negative influence on the fracture properties of the studied carbon steel and that large cyclic loading, especially at R = −1, lowers the apparent J_R-curve for both carbon and stainless steels. To some extent geometry effects appear to be present when comparing the results from pipes containing surface cracks and through-wall cracks with results from CT specimens. These effects are more pronounced for large amounts of stable crack growth than at initiation.     

A circular reflector interferometer for the far infrared

The construction of a Fourier transform spectrometer to study magnetic resonances in solids is described. The spectrometer operates in the Far Infrared (maximum frequency of 500 cm^?1) and is based on a wavefront dividing interferometer with circular geometry. To illustrate the performance, a water vapour spectrum is given.     

Development of a heart monitoring system with high-Tc DC-SQUID gradiometers

We investigated different types of high-T_c DC-SQUID gradiometers with the aim to develop an one-channel heart monitoring system for non-invasive measurements in unshielded environment. This system could be used to obtain information about the patients condition in serial examinations and in emergency cases fast and stable. Step-edge and bicrystal Josephson junctions were used to prepare planar galvanically coupled thin film gradiometers and magnetometers. These sensors were used to carry out measurements in well-shielded and non-shielded environment and we compared the different noise properties and field gradient resolutions. With different types and sizes of high-T_c DC-SQUID sensors magnetocardiograms were measured in a magnetically shielded room. The influence of antenna configurations, SQUID parameters, and cooling conditions on the measurement of magnetocardiograms will be discussed. We investigated possibilities to suppress the earth magnetic field (with pairs of Helmholtz coils) and for noise field compensation in unshielded environment.     

Analysis of lipid classes by solid-phase extraction and high-performance size-exclusion chromatography

An improved method to analyze lipid classes of edible oils and fats by solid-phase extraction (SPE) and high-performance size-exclusion chromatography (HPSEC) is presented. A mixture of lipid standards was fractionated by the solid-phase extraction procedure (NH₂ phase) into polar and nonpolar fractions; these were then submitted to analysis by HPSEC. The size-exclusion chromatographic columns were three styrene/divinylbenzene columns with pore sizes of 100 Å and 50 Å. Light-scattering was used for the detection system, and the parameters of the detector were optimized to minimize the difference between the responses of the compounds studied. With this procedure it was possible to separate the following lipid classes: triacylglycerols, diacylglycerols, monoacylglycerols and free fatty acids, sterols, sterol esters, tocopherols and carotenoids. Quantitative analysis was studied for a light-scattering detector with several lipid standards of different molecular weights and unsaturation levels.     

Bimanual interference associated with the selection of target locations.

Four experiments were conducted to identify the locus of interference observed during the preparation of bimanual reaching movements. Target locations were specified by color, and the right-hand and left-hand targets could be either the same or a different color. Movements of different amplitudes (Experiment 1) or different directions (Experiment 2) to targets of the same color were initiated more quickly than symmetric movements to targets of different colors. These results indicate that costs observed during bimanual movements arise during target selection rather than during motor programming. Experiments 3 and 4 further examined the interference associated with target selection. Reaction time costs were found with unimanual movements when the target was presented among distractors associated with responses for the other hand. Interference observed during bimanual reaching appears to reflect difficulty in segregating the response rules assigned to each hand. (PsycINFO Database Record (c) 2010 APA, all rights reserved)