Direct evidence for dissociated megakaryocytic chimaerism in a Wiskott-Aldrich patient successfully allografted

We report a Wiskott-Aldrich patient who underwent allogeneic bone marrow transplantation from his HLA-identical sister at the age of 25. Conditioning regimen consisted of cyclophosphamide (180 mg/kg) and thoraco-abdominal irradiation (6 Grays). Cytogenetic follow-up revealed rapid and complete lymphoid chimaerism, but prolonged mixed bone marrow chimaerism. Correlative interphase cytogenetics performed on bone marrow smears using dual-colour fluorescence in situ hybridization with X and Y specific probes showed that the proportion of donor cells was significantly higher within megakaryocytes than in other lineages. This patient therefore presented with dissociated lineage engraftment, which is not exceptional in congenital diseases and aplastic anaemia, but has not previously been described in Wiskott-Aldrich syndrome. Bone marrow transplantation was successful despite this delayed engraftment which ensured adequate production in the involved cell lines.     

The Impact of Kilning on Enzymatic Activity of Buckwheat Malt

This study investigated the impact of kilning on α‐amylase, β‐amylase (total and soluble), β‐glucanase and protease activities in buckwheat malt. Common buckwheat (Fagopyrum esculentum) was steeped at 10°C for 12 h, germinated at 15°C for 4 days and kilned at 40°C for 48 h. Moisture content and enzymatic activities were determined throughout the kilning period. Results showed moisture content was reduced from 44% to 5% after 48 h of kilning at 40°C. β‐Amylase was found to exist in a soluble and latent form in buckwheat. Maximum activity of (a) α‐amylase, (b) total β‐amylase, (c) soluble β‐amylase, (d) β‐glucanase and (e) protease activity occurred after (a) 8, (b) 7, (c) 30, (d) 0, and (e) 8 h of kilning, respectively. The final malt exhibited very little β‐glucanase and cellulase activity. Proteolytic activity was low in buckwheat malt when compared to the barley malt control. All enzymatic activities were found to decrease during the kilning stage. Results indicated that after prolonged kilning at 40°C, inactivation of hydrolytic enzymes occurred; two‐stage kilning for shorter periods is recommended. Although, amylolytic activity was low in malted buckwheat, buckwheat malt shows potential as an ingredient for the brewing and cereal industry.     

High-dose chemotherapy followed by reinfusion of selected CD34+ peripheral blood cells in patients with poor-prognosis breast cancer: a randomized multicentre study

Seven chlorine-containing orcinol derivatives (2-8) and orcinol (9) have been isolated from diseased bulbs of the edible lily Lilium maximowiczii, and their structures have been elucidated. Six of the chlorinated orcinol derivatives (2, 4-8) showed antifungal activity. Because organochlorine compounds are rare in terrestrial higher plants, their biosynthetic origin was examined. These compounds were shown to be induced in intact bulb scales by UV irradiation or by inoculation with the pathogenic fungus Fusarium oxysporum f. sp. lilii. Biosynthetic studies suggested that these "natural organochlorine pesticides" are produced by enzymatic chlorination of orcinol (9) with chloroperoxidase and hydrogen peroxide, which are both induced in the plant tissue under stress conditions.     

Ammonia volatilization from urea as affected by the addition of iron pyrites and method of application

Laboratory incubations were conducted to determine the ammonia (NH₃) loss from urea as affected by the addition of coarse and ground (fine) pyrites at 1:1, 1:2 and 1:5 urea: pyrite (w/w) ratios and methods of application (surfaceapplication, incorporation and placement). Coarse pyrites (>-2mm) were not effective in reducing NH₃ loss from urea when surface applied even at the highest ratio of pyrite (15.9% vs 18.7% without pyrite). Ground pyrites (0.1–0.25 mm), in 1:1 ratio, had about 5% less NH₃ loss than the urea alone treatment. Higher ratios of pyrites reduced NH₃ loss much more. Ammonia losses were the most with surface-applied urea (18.9%) and the least (13.5%) when placed (2.5 cm) below the soil surface. Addition of ground pyrite to surface-applied urea (1:1 ratio) decreased the loss to 13.2%. Urea+pyrite placed below the soil surface had the least loss (9.8%). Results indicate that combined application of urea and fine pyrite could reduce NH₃ loss.     

Evaluation of the systematic use of wide lumen 6 French guiding catheters in conventional coronary angioplasty

The aim of this study was to evaluate the results of systematic use of 6 French guiding catheters in conventional balloon coronary angioplasty without any restriction of indications apart from coronary lesions necessitating other techniques such as atherectomy. Therefore, after a learning period, 200 consecutive procedures performed between November 1993 and June 1994 for the treatment of 234 lesions were analysed prospectively. Fifty-one patients had stable and 70 unstable angina. In 79 cases, the angioplasty was performed on the culprit lesion of a myocardial infarction. An angiographic success was obtained for 206 lesions or 88% of cases which increased to 95% after exclusion of attempted recanalisation. There were 3 cases of damage to the ostium and 7 patients underwent implantation of a stent with the same catheter for occlusive or threatening dissection. There were 10 ischaemic complications (5%) (7 non-Q wave infarctions, 2 Q wave infarctions, 1 aorto-coronary bypass, no deaths) and 8 local complications at the site of arterial catheterisation during the hospital period. These results demonstrate the feasibility of coronary angioplasty with wide lumen 6 French guiding catheters and show that they amy be used in first intention for all conventional balloon angioplasty procedures.     

Hepatic metallothionein level and mixed function oxidase activity in fingerling rainbow trout (Oncorhynchus mykiss) after acute exposure to pulp and paper mill effluents

Hepatic metallothionein (MT) levels and mixed function oxidase (MFO) activity (7-ethoxyresorufin-o-deethylase or EROD) were measured in fingerling rainbow trout (Oncorhynchus mykiss) exposed to sublethal concentrations of 12 pulp and paper effluents, after completion of 96 h static acute lethality assays. Barring one primary-treated effluent where MFO levels were significantly depressed and two secondary-treated effluents where no significant MFO induction were observed, all other effluents triggered significant induction of MT and EROD, regardless of mill process/treatment or of effluent lethality and chemical characteristics. MT and EROD inductions were significant, however, at higher concentrations for secondary-treated effluents than for primary-treated ones. Lethal (96 h LC₅₀s) to sublethal (MT and EROD lowest observable effect concentrations) ratios were variable and indicated that significant biochemical effects were present at effluent concentrations that were roughly 4–33 (MT) and 3–59 (EROD) times lower than the LC₃₀. Enzyme induction ranged from 1.3 to 2.5-fold for MT and from 1.3 to 9.4-fold for EROD compared to controls. Limited chemical data available suggest that there were indeed classes of compounds present capable of inducing MT or EROD. Observed patterns of MT/MFO responses also suggest that contaminant interactions may have interfered with induction for some of the effluents studied. Refinements of this combined (sub)lethal bioassay procedure are envisaged to determine whether it can provide an efficient means of detecting hazardous chemicals in industrial wastewaters.     

Optical Properties of Self‐Assembled Cellulose Nanocrystals Films Suspended at Planar–Symmetrical Interfaces

Hierarchically structured materials comprising rod‐like, chiral, nanoparticles are commonly encountered in nature as they can form assemblies with exceptional optical and mechanical characteristics. These include cellulose nanocrystals (CNCs), which have a large potential for the fabrication of bioinspired materials mimicking those advanced properties. Fine‐tuning the optomechanical properties of assemblies obtained from CNCs hinges on the transformations from suspensions of liquid crystals to long‐range order in the dry state. So far, associated transitions have been studied using trivial interfaces such as planar substrates. Such transitions are explored as they evolve onto meshed supports. The meshed substrate offers a complex topology, as is encountered in nature, for the formation of CNCs films. The CNCs self‐assembly occurs under confinement and support of the framework bounding the mesh openings. This leads to coexisting suspended and supported nanoparticle layers exhibiting nematic and/or chiral nematic order. Optical microscopy combined with crossed polarizers indicate that the formation of the suspended films occurs via intermediate gelation or kinetic arrest of CNCs across the mesh's open areas. The formation of self‐standing, ultrathin films of CNCs with tunable optical properties, such as selective reflections in the visible range (structural color), is demonstrated by using the presented simple and scalable approach.     

Multi-scale modelling of silicon nanocrystal synthesis by Low Pressure Chemical Vapor Deposition

A multi-scale model has been developed in order to represent the nucleation and growth phenomena taking place during silicon nanocrystal (NC) synthesis on SiO₂ substrates by Low Pressure Chemical Vapor Deposition from pure silane SiH₄. Intrinsic sticking coefficients and H₂ desorption kinetic parameters were established by ab initio modelling for the first three stages of silicon chemisorption on SiO₂ sites, i.e. silanol Si―OH bonds and siloxane Si―O―Si bridges. This ab initio study has revealed that silane cannot directly chemisorb on SiO₂ sites, the first silicon chemisorption proceeds from homogeneously born unsaturated species like silylene SiH₂. These kinetic data were implemented into the Computational Fluid Dynamics Fluent code at the industrial reactor scale, by activating its system of surface site control in transient conditions. NC area densities and radii deduced from Fluent calculations were validated by comparison with experimental data. Information about the deposition mechanisms was then obtained. In particular, hydrogen desorption has been identified as the main limiting step of NC nucleation and growth, and the NC growth rate highly increases with run duration due to the autocatalytic nature of deposition.     

Intensive sequential chemotherapy with repeated blood stem-cell support for untreated poor-prognosis non-Hodgkin's lymphoma

PURPOSE: To demonstrate the feasibility and efficacy of six ambulatory high-dose sequential chemotherapy courses that include three intensified cycles supported by stem-cell infusion in high-risk and high-intermediate-risk untreated non-Hodgkin's lymphoma (NHL) patients. PATIENTS AND METHODS: A pilot nonrandomized study included 20 untreated patients aged less than 60 years with aggressive histologically identified NHL and two or three adverse-prognosis criteria (International Index). Patients received an ambulatory regimen with high-dose chemotherapy supported by granulocyte colony-stimulating factor (G-CSF) and repeated peripheral-blood stem-cell (PBSC) infusion. The median age was 39 years (range, 20 to 59), with 13 men and seven women. Chemotherapy consisted of one cycle every 21 days for a total of six cycles. The first three cycles (A1, A2, and A3) consisted of cyclophosphamide (Cy) 3,000 mg/m2, doxorubicin (Doxo) 75 mg/m2, and vincristine 2 mg (plus corticosteroids). The last three cycles (B4, B5, and B6) consisted of the same drug combination plus etoposide 300 mg/m2 and cisplatin 100 mg/m2. For an expected duration of 18 weeks, the projected dose-intensity was 25 mg/m2/wk for Doxo and 1,000 mg/m2/wk for Cy. G-CSF 300 micrograms was administered from day 6 following each cycle until neutrophil reconstitution. Two aphereses were performed at approximately day 13 after each A cycle, and PBSCs were injected at day 4 of each B cycle. Radiotherapy on tumor masses > or = 5 cm was scheduled after completion of the last cycle. RESULTS: The median duration of grade 4 neutropenia was 1 day (range, 0 to 7) for each A cycle and 4 days (range, 1 to 10) for each B cycle (P = .02). The median duration of grade 4 thrombopenia was 0 days (range, 0 to 8) for each A cycle and 6 days (range, 1 to 21) for each B cycle (P < .001). Hospitalization for febrile neutropenia was required for 18% and 44% of patients during cycles A and B, respectively (P < .01). Only three patients did not complete the protocol: one due to emergency surgery after cycle B4, one who died after cycle B5 from interstitial pneumonia, and one with delayed hematologic reconstitution after cycle B4. Chemotherapy delivery was optimal (median actual relative dose-intensity, 97%; range, 66 to 100). The median total dose administered over 18 weeks was 18,000 mg Cy (range, 12,000 to 18,000), 450 mg Doxo (range, 300 to 450), 900 mg etoposide (range, 300 to 900), and 300 mg cisplatin (range, 100 to 300). Evaluation of response after six courses showed 13 complete remissions ([CRs] 65%), four partial remissions (PRs), two nonresponses (NRs), and one toxic death. With a median follow-up period of 25 months (range, 16 to 43), 15 patients are alive, with 12 in continuous first CR; five patients relapsed (four of four PRs and one of 13 CRs). Two-year survival and failure-free survival (FFS) rates are 73% and 56%, respectively. The disease-free survival (DFS) rate for the CRs is 86%. CONCLUSION: PBSC support contributes to the feasibility of first-line, very-high-dose, ambulatory chemotherapy delivery in poor-risk NHL and is associated with a high rate of remission and FFS.