论网络升级方式与光纤选择的关系

在重点说明影响传输光纤设计的主要问题的同时，简要介绍了各种升级方式所面临的主要技术挑战，并详细说明这些挑战对传输光纤提出的技术要求。     

The morphology of rigid-rod polymers and molecular composites resulting from coagulation processing

The effects of processing conditions on the morphology of molecular composite films are examined by optical and electron microscopy. During coagulation processing from solutions in methanesulfonic acid (MSA), rigid-rod polymer, such as poly(p-phenylenebenzobisoxazole) (PBO), phase separates into undesirable aggregates. The coagulant and the method of its introduction have been found to exert a strong impact on the final film morphology. A quench of a PBO solution in MSA into a water bath results in a three dimensional interconnected network of PBO, while a slower introduction of water results in a more amorphous material. A computer simulation program of the coagulation process has been developed to better understand the different structures emerging from coagulation processing of molecular composites. The simulation results are in qualitative agreement with the experimental observations.     

Two new decoding algorithms for Reed-Solomon codes

The subject of decoding Reed-Solomon codes is considered. By reformulating the Berlekamp and Welch key equation and introducing new versions of this key equation, two new decoding algorithms for Reed-Solomon codes will be presented. The two new decoding algorithms are significant for three reasons. Firstly the new equations and algorithms represent a novel approach to the extensively researched problem of decoding Reed-Solomon codes. Secondly the algorithms have algorithmic and implementation complexity comparable to existing decoding algorithms, and as such present a viable solution for decoding Reed-Solomon codes. Thirdly the new ideas presented suggest a direction for future research. The first algorithm uses the extended Euclidean algorithm and is very efficient for a systolic VLSI implementation. The second decoding algorithm presented is similar in nature to the original decoding algorithm of Peterson except that the syndromes do not need to be computed and the remainders are used directly. It has a regular structure and will be efficient for implementation only for correcting a small number of errors. A systolic design for computing the Lagrange interpolation of a polynomial, which is needed for the first decoding algorithm, is also presented.This research was supported by a grant from the Canadian Institute for Telecommunications Research under the NCE program of the Government of Canada     

Detection of West Nile virus by the polymerase chain reaction and analysis of nucleotide sequence variation

A polymerase chain reaction (PCR) assay was developed to rapidly detect and identify West Nile (WN) virus. The RNA from seven isolates of WN virus from six countries and four other flaviviruses (Kunjin, Japanese encephalitis, St. Louis encephalitis, and yellow fever viruses) was reverse-transcribed (RT) and amplified by PCR. The nucleotide sequences of the amplified products were determined by a rapid, automated DNA sequencing method. The WN virus RT/PCR assay detected the target gene segment of sequencing method. The WN virus RT/PCR assay detected the target gene segment of isolates from both the African-Middle Eastern group and the Indian group with a sensitivity of approximately 0.05 pg of viral RNA. Kunjin virus was the only other flavivirus tested that produced a band of the appropriate size. Five of seven WN virus isolates showed 92-98% homology in the nucleotide sequence of their PCR products. The sequence of one isolate was virtually identical to the published sequence of the Nigerian isolate (99.5% homology). No correlation was established between the degree of nucleotide homology, geographic location, time of isolation, or source of the isolates.     

Elimination of extra spring effect at the step-up anchor ofsurface-micromachined structure

This paper describes the concept, analysis, fabrication, and testing of a new anchor for surface-micromachined beams. The anchor is designed to eliminate the extra spring effect at the step-up anchor common in conventional surface-micromachined beams, so that the boundary condition follows the ideal anchoring condition more accurately. The idea is to form a reinforcement hump at the beam anchor through a minor modification in the sacrificial-layer mask. No modification in the fabrication process is necessary. Formation of the reinforcement hump is tested using the multiuser MEMS Process (MUMP) foundry service at the Microelectronics Center of North Carolina (MCNC). The effectiveness of the new anchor is analyzed by finite-element analysis based on the actual anchor geometry obtained from the fabrication directly. Experimental verification is provided by making overhanging microcantilever pairs, one with the new anchor and the other with conventional, through MUMP's and postprocessing and comparing their frequency responses. Small-signal frequency response measurements are made with a modified Michaelson interferometer. Resonant frequency of a 2-μm-thick 300-μm-long polysilicon cantilever with the new anchor differed by less than 0.1% from the ideal anchor case. In comparison, the resonant frequency of the same beam with a conventional anchor is off by over 1%     

Depressed mood does not explain neuropsychological deficits in HIV-infected persons.

The relationship of depressed mood to cognitive disturbance in HIV infection was examined in a sample of 139 homosexual men. Ss were grouped according to the classification of the Centers for Disease Control: 39 were in Group IV, 62 were in Group II or Group III, and 38 were HIV-negative. Ss completed the Profile of Mood States and 10 neuropsychological tests. Analysis employing a classification approach indicated that, although symptoms of depression and neuropsychological impairment were more common in Ss who were HIV-positive, particularly those classified as Group IV, there were no systematic relationships between depression and neuropsychological impairment. Depressed mood and cognitive disturbance each seem to have unique associations to HIV illness status. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Military tobacco use: a synthesis of the literature on prevalence, factors related to use, and cessation interventions

Tobacco use remains the number one cause of preventable morbidity and premature death in the United States. As a result, military leaders are recognizing that tobacco can adversely affect military fitness levels, deployment readiness, and safety and can increase health care costs. Yet military members continue to use tobacco. Tobacco may be viewed as part of the military culture since military members have used tobacco for many decades for pleasure, comfort, and currency and as a morale booster. Most recently, the military has seen an increase in tobacco use among young military members. A number of research studies have examined the prevalence of tobacco and factors related to use in the military, and several have evaluated cessation and prevention interventions. This article provides a brief historical perspective of military tobacco use in the 20th century and a critical review of the literature published between 1991 and 2006 describing prevalence of tobacco use, factors influencing use, and cessation interventions in the military. Recommendations for future research and for interventions are provided.     

On the Auditory Modality Superiority Effect in Serial Recall: Separating Input and Output Factors.

The modality effect in immediate recall refers to superior recall of the last few items within lists presented in spoken as opposed to printed form. The locus of this well-known effect has been unclear. N. Cowan, J. S. Saults, E. M. Elliott, and M. Moreno (2002) introduced a new method to distinguish between the effects of input serial position, output serial position, and the number of items yet to be recalled and found that large modality effects occurred only in conditions in which delay and interference at output (from items already recalled) was high. The authors replicated that finding, even when the response period included output interference acoustically similar to the spoken stimuli to be recalled. However, the authors found that output delay and interference act only by lowering the level of performance to a more sensitive range. The modality effect thus originates during encoding of the list to be recalled, not during output. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The influence of magnetron sputtered silver and titanium coatings on the compaction and properties of surface modified PM Ti-48Al powders

Thin layers of silver and titanium were deposited onto commercial Ti–₄₈Al particles by magnetron sputtering prior to their consolidation by hot isostatic pressing and subsequent heat treatment. Based on picnometry and electron probe microanalysis results, average values of 1.5 and 2.5 at.%, respectively, were obtained for the silver and titanium contents in the coated particles. The surface modified Ti–₄₈Al particles exhibited improved sintering ability than the unmodified ones. The consolidated samples have duplex microstructures formed by γ-TiAl and γ-TiAl + α₂-Ti₃Al grains. Ag-rich nanoprecipitates were detected in the microstructure of the compacted Ti-₄₈Al + Ag sample. The coatings are no longer visible at the grains boundaries after a subsequent homogenization heat treatment at 1200°C. The highest values of hardness and Young’s modulus were obtained for the Ti–₄₈Al + Ag sample, associated with a higher density and a lower percentage of pores.