The preparation and properties of some lithium zinc silicate glass-ceramics

Lithium zinc silicate glasses are of interest for the preparation of moderately high thermal expansion glass-ceramics which are suitable for sealing to a number of nickel-based superalloys. The effect of composition, in particular the variation of nucleating species, on the crystallization behaviour of a number of these glasses has been examined using differential thermal analysis, X-ray diffraction, and electron microscopy. Various crystal phases have been identified, including cristobalite, quartz, tridymite and ₀ Li₂ZnSiO₄. In addition, most of the glass-ceramics also contain an unidentified phase which may be related to the-series of lithium zinc silicates. Heat-treatment schedules have been derived on the basis of these results in order to produce a number of glass-ceramic materials. The resultant thermal expansion characteristics of the glass-ceramics have been monitored using dilatometry, and expansions in the range 12.3 to 17.1×10^–6° C^–1 (20 to 460° C), have been obtained, depending on the precise glass composition and heat-treatment schedule employed. In addition, the mechanical properties of a number of selected samples have been monitored, employing a biaxial flexure technique.     

Bulk and suspension polymerization of styrene in the presence of n-pentane. An evaluation of monofunctional and bifunctional initiation

The plasticizing effect of n-pentane on the rate of bulk free radical polymerization of styrene and molecular weight distribution development has been modeled on the basis of the free volume theory for both monofunctional and bifunctional initiation. A strong decrease in the reaction rate in the late stages of the polymerization, due to the displacement of the onset of the gel effect, has been observed for both types of initiation. This decrease in the polymerization rate limited the terminal conversion to values well below 100% for mono-functional initiation. However, in bifunctionally initiated polymerization, terminal conversions close to 100% were obtained in spite of the decrease in reaction rate. Contrary to what was expected, the molecular weight distribution obtained at terminal conversion was almost completely insensitive to these changes in polymerization rate. This phenomenon is explained in terms of limited transfer to monomer reactions when n-pentane is present in the system. In suspension polymerization, the limiting conversion and plasticizing effects of n-pentane in monofunctionally initiated systems, caused enhanced coalescence leading to suspension set-up. In bifunctionally initiated systems this enhanced coalescence was completely overcome by the short duration of the particle growth stage, owing to high polymerization rates, and stable suspensions were achieved. For these systems the particle size distributions obtained were similar to that of suspension polystyrene without n-pentane. © 1993 John Wiley & Sons, Inc.     

Feeding response of Ips paraconfusus to phloem and phloem metabolites of Heterobasidion annosum-inoculated ponderosa pine,Pinus ponderosa

In studies of feeding by the bark beetle, Ips paraconfusus, two pine stilbenes (pinosylvin and pinosylvin methyl ether), ferulic acid glucoside, and enantiomers of the four most common sugars present in ponderosa pine phloem (sucrose, glucose, fructose, and raffinose) did not stimulate or reduce male feeding when assayed on wet -cellulose with or without stimulatory phloem extractives present. When allowed to feed on wet -cellulose containing sequential extracts (hexane, methanol, and water) of ponderosa pine phloem, methanol and water extractives stimulated feeding, but hexane extractives did not. Males confined in wet -cellulose containing aqueous or organic extracts of culture broths derived from phloem tissue and containing the root pathogen, Heterobasidion annosum, ingested less substrate than beetles confined to control preparations. In an assay using logs from uninoculated ponderosa pines, the mean lengths of phloem in the digestive tracts increased as time spent feeding increased. Males confined to the phloem of basal logs cut from ponderosa pines artificially inoculated with H. annosum ingested significantly less phloem than beetles in logs cut from trees that were (combined) mock-inoculated or uninoculated and did not contain the pathogen. However, individual pathogen-containing treatments were not significantly different from uninoculated controls. It was concluded that altered feeding rates are not a major factor which may explain why diseased ponderosa pines are colonized by I. paraconfusus.     

Exploiting border structure in solving large sparse linear systems in bordered triangular form

An elimination strategy for solving sparse linear systems in bordered triangular form is presented. This strategy is designed to exploit certain common structural properties of the borders of such a system. It may also be interpreted as a recursive application of block elimination. The technique is numerically efficient and provides significant reductions in fill-in compared to routine Gaussian elimination. It is applicable in the iterative solution of the large systems of nonlinear equations that arise in the equation-oriented approach to process simulation and design calculations, as well as in other problems of interest to the chemical engineer.     

Attractive and inhibitory pheromones produced in the bark beetle,Dendroctonus brevicomis,during host colonization: Regulation of inter- and intraspecific competition

Quantities of attractive (exo-brevicomin and frontalin) and inhibitory (trans-verbenol, verbenone, and ipsdienol) pheromones were monitored in both sexes ofDendroctonus brevicomis during their colonization of a ponderosa pine. Verbenone was found in males in the greatest amounts at the time of landing, and it declined more rapidly than the other pheromones in either sex. The amounts of frontalin andexo-brevicomin in males and females, respectively, increased after initial boring within the host but began to decline after mating. The quantity oftrans-verbenol in both sexes (females had significantly more) declined more gradually thanexo-brevicomin, frontalin, and verbenone. Ipsdienol was found only in males during the initial stages of attack when encountering the resin. It is suggested that along with a general decline in all pheromonal components, a sufficient change in the ratio of the attractive pheromones to an inhibitory pheromone,trans-verbenol, may play a role in termination of aggregation.trans-Verbenol may also function along with verbenone and ipsdienol in limiting the density of attack and thus intraspecific competition. These inhibitory pheromones also appear to cause several competing species of bark beetle to avoid landing in areas infested withD. brevicomis, even when their own pheromone is present.Coleoptera:Scolytidae. These studies were supported in part by the Rockefeller Foundation, USDA Forest Service, Regional research project W-110, SEA/ USDA, and the National Science Foundation and Environmental Protection Agency through a grant (NSF GB-34719/BMS 75-04223) to the University of California.     

胶管胶带用硫化剂和防老剂

越来越高的汽车发动机温度对在汽车中使用的胶管和胶带用聚合物提出了更严格的要求。本综述了胶管和胶带中使用的聚合物，并针对提高耐热、耐屈挠疲劳和耐臭氧老化性能讨论了每一种聚合物用的硫化体系和防老剂搭配。     

The roles of nitrogen,phosphorus and Potassium in the production of sugarcane in South Africa

The amounts of N and K fertilizers used in the South African sugar industry have increased dramatically in the past four decades, due partly to an increase in the area under sugarcane but also to large increases in the amounts of N and K fertilizers applied per hectare. There has also been an increase in the amount of P fertilizer used but this has been more gradual. The main fertilizer carriers for cane and their relative efficiency are discussed. During this period there has been considerable research into the nutrient requirements of sugarcane. Correlations established between soil and leaf analysis and crop responses to N, P and K fertilizers, and their effects on cane quality, are reviewed. While fertilizer recommendations based on soil and leaf analysis have provided a useful guide for determining the nutrient requirements of cane, they are continually being modified in the light of current research.     

Role of metal ion impurities in generation of oxygen gas within anodic alumina

The generation of oxygen gas within an amorphous anodic alumina film is reported. The film was formed by anodizing aluminum, which was first electropolished and then chemically polished in CrO₃-H₃PO₄ solution, in sodium tungstate electrolyte. The procedure results in incorporation of mobile Cr³⁺ species, from the chemical polishing film, and mobile W⁶⁺ species, from the electrolyte, into the amorphous structure. The tungsten species are present in the outer 27% of the film thickness, while Cr⁶⁺ species occupy a thin layer within the tungsten-containing region. Above the Cr³⁺ containing layer, a band develops that contains oxygen bubbles of a few nanometres size. The oxygen is generated by oxidation of O²⁻ ions of the alumina. A mechanism of oxygen generation within the alumina is proposed based on the electronic band structure of the oxide, modified by the Cr³⁺ and W⁶⁺ species, and on the ionic transport processes during oxide growth.     

Terminal composition control of a binary distillation column

Terminal composition control of a pilot scale binary distillation column operated under the control of an IBM 1800 digital computer has been studied for disturbances in feed flow rate. Conventional two point control, whereby the overhead composition is controlled by reflux flow rate and bottom composition by means of steam rate, was demonstrated to be unsatisfactory. Two alternate control systems, namely a noninteracting control system and a ratio control system were evaluated. The noninteracting control system was constructed from a transfer function representation of the distillation column dynamics, determined from a series of on-line pulse tests. The results show that a very significant improvement in the control of both compositions is achieved by using noninteracting control or the ratio control scheme suggested by Rijnsdorp compared to the behavior that results using conventional two point feedback control. However, the control performance obtained using noninteracting control was only marginally better than that using the ratio control scheme.     

Practical Design Model for Calculating Bubble Diffuser Contactor Ozone Transfer Efficiency

Ozone transfer to water or wastewater is necessary before desirable, effective ozone reactions occur. Several factors affect ozone transfer efficiency, including water quality characteristics, contactor configuration, and applied ozone characteristics. The design model presented in this paper addresses all factors affecting ozone transfer. The model was used to compare measured transfer efficiency with predicted transfer efficiency at four full-scale wastewater ozone disinfection facilities. A relatively good prediction was obtained at each plant.

The paper presents an example calculation of ozone transfer efficiency. Also, the effect of changes to some of the factors affecting transfer efficiency is presented, such as changes in diffuser depth, plant elevation, ozone concentration, water quality (i.e., ozone demand), pH, detention time, temperature, and acombination of factors. The design model may be used to evaluate the effect of changes in plant design on transfer efficiency, but cannot provide an absolute value for transfer efficiency until difficult-to-measure parameters, such as bubble diameter, are known.