Real time pricing to assist in load frequency control

The use of real-time prices (i.e. pricing in the presence of system dynamics) to assist in the control of frequency and tie-line deviations in electric power systems is discussed. Under idealized assumptions, prices for load frequency control are derived that reflect the underlying physical relationships of the power system. Applying the theoretical results to a simple example, real-time prices determined by a feedback control law for frequency deviations are shown to aid in load frequency control. It is concluded that real-time pricing could serve as the basis of an economic load/shedding policy to assist the direct control by the electric utility     

Industrial Cogeneration Design Options

Cogeneration in process industries with high energy demand provides an opportunity to cut energy costs and increase revenues. A study funded by the Electric Power Research Insitute (EPRI) of a hypothetical 1985 1000 ton per day kraft pulp mill evaluates steam and power system design options for three cases, compares the economics, and looks at ownership and operating alternatives. The first case is the no generation case. Steam is produced for process use, and electric power is purchased but not generated. The second is the thermal match case. Steam needed for process is produced at a higher pressure and temperature and then passed through a turbine to generate electric power before being used to meet the plant's thermal demands. In the third case, the maximum cogeneration case, more steam is generated than the plant requires. The additional steam is used to generate additional power. The plant may buy all of its electric power from the utility while selling over separately metered tie lines all of the power generated, or the plant may sell only surplus power available after meeting its own power needs.     

A novel thermo-pneumatic peristaltic micropump with low temperature elevation on working fluid

This work presents a novel thermo-pneumatic peristaltic micropump with low temperature elevation on working fluid. The proposed device, which consists of two separate zones for air-heating and fluid-squeezing, is realized by using micromachining techniques. Also, the device can be operated by using a small and simple actuation circuitry with low applied voltages. Under similar operational conditions, the proposed micropump shows similar fluid-pumping performance when compared with the conventional design of thermo-pneumatic micropumps. However, for the proposed design, the temperature elevation on the fluid-pumping area is as small as about 2.0 K, which is less than 8% of that generated by the conventional design. Furthermore, by applying higher voltages, larger flow rate can be achieved with relatively small increase in temperature elevation. Due to low temperature elevation on working fluid, the proposed device is suitable for the applications such as DNA chips or protein chips. In addition, because of its small size and simple actuation scheme, potentially the proposed device can be integrated into the devices for point-of-care applications.     

Antidepressant pharmacotherapy helps some cigarette smokers more than others.

Adult smokers (N?=?253) without clinically significant depression were randomized on a double-blind basis to receive fluoxetine (30 or 60 mg daily) or a placebo for 10 weeks in combination with cognitive-behavioral therapy (CBT). It was predicted that fluoxetine would selectively benefit smokers with higher baseline depression, nicotine dependence, and weight concern and lower self-efficacy about quitting smoking. Among those who completed the prescribed treatment regimen, baseline depression scores moderated the treatment response. Logistic regression analyses showed that 1 and 3 months after the quit date, fluoxetine increased the likelihood of abstinence, as compared with placebo, among smokers with minor depression but not among those with little or no depression. Results suggest that, as an adjunct to CBT, fluoxetine enhances cessation by selectively benefiting medication-compliant smokers who display even subclinical levels of depression. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Thermoluminescence dating of archaeological artefacts from the Middle Neolithic,Bronze Age and the Roman Empire period

Thermoluminescence (TL) dating was applied for artefacts found near the small village of Michelstetten, Lower Austria. Settlements in this region can be traced hack a long time and, according to archaeologists, the discovered artefacts may be as old as 6000 years. A modified sample preparation technique based on the fine-grain method was developed. This technique results in a higher reproducibility and reduces the overall preparation time. For some artefacts the new information of the TL dating leads to an unforeseen re-interpretation of the archaeological age. Furthermore, an iron furnace from the period of the Roman Empire could be dated. For the first time, it was possible to estimate correctly the point of time of the burn-down of an ancient wooden house via an analysis of the house's clay plaster. The fire took place in the sixth century; this was confirmed by dating ceramic artefacts.     

The efficiency of nanotube formation on titanium anodized under voltage and current control in fluoride/glycerol electrolyte

The formation of nanotubes on titanium is compared for anodizing under controlled voltage and controlled current in a fluoride/glycerol electrolyte. Rutherford backscattering spectroscopy and nuclear reaction analysis are employed to determine the film compositions. Film morphologies are examined by electron microscopy. The findings reveal films of approximate composition TiO(2).0.15TiF(4) that probably also contain derivatives of glycerol. Controlled voltage conditions resulted in more uniform final nanotube dimensions, for a particular charge density, and the highest efficiency of film growth, with the charge of the titanium in the film representing ～48% of the charge passed during anodizing. Under current control, the efficiency decreased from ～40% to ～23% with increase of the current density from 0.1 to 0.5?mA?cm(-2). Further, the thickness of the barrier layer was sometimes enhanced under current control, possibly due to a non-uniform current distribution and consequently elevated local temperature.     

Bioceramics composition modulate resorption of human osteoclasts

Biomaterials used in bone regeneration are designed to be gradually resorbed by the osteoclast and replaced by new bone formed through osteoblastic activity. The aim of the present study is to analyze the role of osteoclasts in the resorption process. The attachment of human osteoclasts and the appearance of their resorption lacunae, when cultured on either the resorbable crystalline, calcium orthophosphate materials or on the long-term stable bioceramic material was investigated. The resorbable materials contain Ca₁₀[K,Na](PO₄)₇ (AW-Si) and Ca₂KNa(PO₄)₂ (GB14, GB9 & D9/25) as their main crystal phases, however they differ in their total solubility. These differences result from small variations in the composition. The long-term stable material consist of about 30% fluorapatite beside calcium zirconium phosphate (Ca₅(PO₄)3F + CaZr₄(PO₄)₆) and shows a very small solubility. AW-Si has an alkali containing crystalline phase, Ca₁₀[K,Na](PO₄). While GB14, GB9 and D9/25 contain the crystalline phase Ca₂KNa(PO₄)₂ with small additions of crystalline and amorphous diphosphates and/or magnesium potassium phosphate (GB14). D9/25 and AW-Si is less soluble compared to GB14, and GB9 among the resorbable materials. Resorbable and long-term stable materials vary in their chemical compositions, solubility, and surface morphology. Osteoclasts modified the surface in their attempts to resorb the materials irrespective of the differences in their physical and chemical properties. The depth and morphology of the resorption imprints were different depending on the type of material. These changes in the surface structure created by osteoclasts are likely to affect the way osteoblasts interact with the materials and how bone is subsequently formed.     

Catastrophe loss modelling of storm-surge flood risk in eastern England

Probabilistic catastrophe loss modelling techniques, comprising a large stochastic set of potential storm-surge flood events, each assigned an annual rate of occurrence, have been employed for quantifying risk in the coastal flood plain of eastern England. Based on the tracks of the causative extratropical cyclones, historical storm-surge events are categorized into three classes, with distinct windfields and surge geographies. Extreme combinations of "tide with surge" are then generated for an extreme value distribution developed for each class. Fragility curves are used to determine the probability and magnitude of breaching relative to water levels and wave action for each section of sea defence. Based on the time-history of water levels in the surge, and the simulated configuration of breaching, flow is time-stepped through the defences and propagated into the flood plain using a 50 m horizontal-resolution digital elevation model. Based on the values and locations of the building stock in the flood plain, losses are calculated using vulnerability functions linking flood depth and flood velocity to measures of property loss. The outputs from this model for a UK insurance industry portfolio include "loss exceedence probabilities" as well as "average annualized losses", which can be employed for calculating coastal flood risk premiums in each postcode.     

Water vapor transport in liquid crystalline and non-liquid crystalline epoxies

This paper presents a comparison of moisture permeation in liquid crystalline and non-liquid crystalline epoxy systems. The permeability is obtained using a dynamic method. It is found that diffusion in both epoxy systems is Fickian. The liquid crystalline epoxy network exhibits higher barrier properties to moisture transport than the conventional epoxy network. The efficient chain packing of the smectic mesophase of the liquid crystalline epoxy is the main factor for this difference. The stoichiometry has a large effect on the moisture permeation. The diffusion coefficient decreases monotonically with increasing amine/epoxide functional ratio. The permeability (P) and solubility coefficient (S) reach a minimum for a functional ratio of one. The results are described on the basis of hydrogen bonding of water to the epoxy network and the two phase morphology of cured epoxies.     

Adherence Across Behavioral Domains in Treatment Promoting Smoking Cessation Plus Weight Control.

The authors tested whether adherence to simultaneous health behavior changes was unitary or domain specific among 76 women who modified smoking, eating, and physical activity to accomplish smoking cessation plus weight control. Random-effects regression analyses showed that adherence to both smoking and diet plans declined linearly and covaried positively; their association tended to grow stronger over time. In contrast, physical activity plan adherence did not change over time and was unrelated to other domains. At the end of treatment, 65%, 30.5%, and 25% adhered well or excellently to smoking, diet, and activity treatments, respectively. Findings support both unitary and domain-specific aspects of adherence and suggest that among smokers, smoking and eating behaviors may have similarities unshared by physical activity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)