Defining the e-learner’s security profile: Towards awareness improvement

The paper presents an improved e-learner model that supports monitoring of user behavior related to information security. The model is built upon standardized IMS specification, according to literature research and survey conducted among e-learners. It is positioned as key part of an extended LTSA architecture in which the learner data is used to improve learner security position by continuous delivery of important information and adapting security mechanisms. The implementation is considered in Moodle LMS.     

Differences in cytocompatibility,dynamics of the oxide layers’ formation,and nickel release between superelastic and thermo-activated nickel–titanium archwires

Superelastic (SE) and thermo-activated (TA) nickel–titanium (NiTi) archwires are used in everyday orthodontic practice, based on their acceptable biocompatibility and well-defined shape memory properties. However, the differences in their surface microstructure and cytotoxicity have not been clearly defined, and the standard cytotoxicity tests are too robust to detect small differences in the cytotoxicity of these alloys, all of which can lead to unexpected adverse reactions in some patients. Therefore, we tested the hypothesis that the differences in manufacture and microstructure of commercially available SE and TA archwires may influence their biocompatibility. The archwires were studied as-received and after conditioning for 24 h or 35 days in a cell culture medium under static conditions. All of the tested archwires, including their conditioned medium (CM), were non-cytotoxic for L929 cells, but Rematitan SE (both as received and conditioned) induced the apoptosis of rat thymocytes in a direct contact. In contrast, TruFlex SE and Equire TA increased the proliferation of thymocytes. The cytotoxic effect of Rematitan SE correlated with the higher release of Ni ions in CM, higher concentration of surface Ni and an increased oxygen layer thickness after the conditioning. In conclusion, the apoptosis assay on rat thymocytes, in contrast to the less sensitive standard assay on L929 cells, revealed that Rematitan SE was less cytocompatible compared to other archwires and the effect was most probably associated with a higher exposition of the cells to Ni on the surface of the archwire, due to the formation of unstable oxide layer.     

An adaptive method based on the improved LPA-ICI algorithm for MRI enhancement

Various diseases are diagnosed using medical imaging used for analysing internal anatomical structures. However, medical images are susceptible to noise introduced in both acquisition and transmission processes. We propose an adaptive data-driven image denoising algorithm based on an improvement of the intersection of confidence intervals (ICI), called relative ICI (RICI) algorithm. The 2D mask of the adaptive size and shape is calculated for each image pixel independently, and utilized in the design of the 2D local polynomial approximation (LPA) filters. Denoising performances, in terms of the PSNR, are compared to the original ICI-based method, as well as to the fixed sized filtering. The proposed adaptive RICI-based denoising outperformed the original ICI-based method by up to 1.32 dB, and the fixed size filtering by up to 6.48 dB. Furthermore, since the denoising of each image pixel is done locally and independently, the method is easy to parallelize.     

A SLIT THROUGH PHOTOGRAPHY

Post-war experimental and conceptual photography in former Yugoslavia has only rarely been the subject of detailed study and interpretation. In considering this period, it is necessary to take into account several factors, including the absence of permanent exhibition spaces for photography, the lack of magazines in which photographic themes were presented and discussed, the impossibility of studying the field of photography and, finally, the inadequate knowledge and application of contemporary criticism and theories of photography. Nevertheless, from the mid-1950s onwards it is possible to note a variety of innovations in the field, in terms of both form and subject-matter. This article considers rare instances of institutional support for progressive photography-related events and unique, intellectual-poetic works. After the break-up of Yugoslavia, there is a dominant tendency to nationalize art created in the former state, thus ignoring the specific Yugoslav cultural field as well as the European context. Based on a methodology which surpasses the national (but still acknowledges it) and searches for meaning within the broader socio-political space to which art is referring, the research aims to change the paradigm of the peripheral position and general ignorance of the circumstances under which this innovative practice emerges.     

Highly Exposed ?NH2 Edge on Fragmented g-C3N4 Framework with Integrated Molybdenum Atoms for Catalytic CO2 Cycloaddition: DFT and Techno-Economic Assessment

This study focuses on the applicability of single-atom Mo-doped graphitic carbon nitride (GCN) nanosheets which are specifically engineered with high surface area (exfoliated GCN),  NH₂ rich edges, and maximum utilization of isolated atomic Mo for propylene carbonate (PC) production through CO₂ cycloaddition of propylene oxide (PO). Various operational parameters are optimized, for example, temperature (130 °C), pressure (20 bar), catalyst (Mo₂GCN), and catalyst mass (0.1 g). Under optimal conditions, 2% Mo-doped GCN (Mo₂GCN) has the highest catalytic performance, especially the turnover frequency (TOF) obtained, 36.4 h⁻¹ is higher than most reported studies. DFT simulations prove the catalytic performance of Mo₂GCN significantly decreases the activation energy barrier for PO ring-opening from 50–60 to 4.903 kcal mol⁻¹. Coexistence of Lewis acid/base group improves the CO₂ cycloaddition performance by the formation of coordination bond between electron-deficient Mo atom with O atom of PO, while  NH₂ surface group disrupts the stability of CO₂ bond by donating electrons into its low-level empty orbital. Steady-state process simulation of the industrial-scale consumes 4.4 ton h⁻¹ of CO₂ with PC production of 10.2 ton h⁻¹. Techno-economic assessment profit from Mo₂GCN is estimated to be 60.39 million USD year⁻¹ at a catalyst loss rate of 0.01 wt% h⁻¹.     

A temperature-dependent Mössbauer study of mechanically activated and non-activated zinc ferrite

The changes of ZnFe₂O₄ caused by mechanical activation as well as the structural evolution of nonactivated and mechanically activated zinc ferrite occurring during heating, have been investigated by in situ Mössbauer spectroscopy. Attention is directed to mechanically induced changes in magnetic properties of zinc ferrite, the variation of nuclear quadrupolar interactions, the thermally induced changes of the Mössbauer shift, and also to the structural response of mechanically activated zinc ferrite to changes in temperature.     

A high accuracy reactive power and reactive energy meter

Contents A high accuracy instrument for reactive power and reactive energy measurements in a single phase power network is described in the paper. The measurement principle is in accordance with IEC recommendation. Test results show that in the range of 1 to 100% of the input current the accuracy of the meter is better than 100 ppm for frequency variations of ±5% around the nominal frequency. The instrument could be used as a single-phase reactive power and reactive energy standard. A three phase version of the instrument could be used as a standard or as a revenue meter because of its high accuracy, simple design and anticipated low cost.

---

Ein Meßgerät höher Präzision zur Blindleistungs- und Blindverbrauchsmessung

Übersicht In diesem Artikel wird ein Meßgerätu zur Blindleistungs- und Blindenergiemessung in Einphasen-Wechselstromnetzen beschrieben. Das Meßprinzip stimmt mit der Vorschrift der IEC überein. Die Meßergebnisse zeigen, daß im Bereich von 1 bis 100% des Eingangsstroms bei Frequenzvariationen von ±5% von der Nennfrequenz die Meßfehler des Gerätes kleiner als 0.01% sind. Das Meßgerät könnte als ein Normal für Blindleistungs- und Blindenergievergleichsmessungen in Einphasensystemen verwendet werden. Eine Dreiphasenversion dieses Meßgerätes könnte wegen seiner hohen Genauigkeit und des einfachen und preiswerten Aufbaus als ein Normal oder als Verbrauchsmeßgerät für die Kostenberechnung benutzt werden.

---

---

Institute for National Measurement Standards, National Research Council     

Dynamic programming based multi-stage optimization of shunt capacitors in radial distribution systems

Contents In this paper, a new optimal procedure of the general compensation problem is proposed, by minimizing the performance criterion depending on both active power and energy losses, and by taking into account cost of shunt capacitor banks and system voltage constraints. The new solution method represents a combinatorial searching procedure, with non-differentiable optimization criterion, by using the multi-stage optimization based on dynamic programming. The applications of the method to three different test system have shown important improvements in the sense of speed and effectiveness of calculations, when compared to previously advertised solution methods.

---

Mehrstufige Optimierung der Parallelkondensatoren in radialen Verteilungsnetzen mittels dynamisch Programmierung

Übersicht In diesem Artikel wird ein neues Verfahren für die allgemeine Blindleistungkompensation vrgestellt. Das Verfahren basiert auf der Minimierung der Optimalitätsbedingung, die Funktion der Wirkleistung und der Energieverluste ist. Die Kosten der Kondensatorbänke und die Betriebsgrenzen der Netzspannungen werden auch berücksichtigt. Die neue Methode stellt ein kombinatorisches Suchverfahren mit nicht-diffenzierbarer Optimalitätsbedingung dar. Dabei wird die mehrstufige Optimierung verwendet die auf der dynamischen Programmierung basiert. Die Bewertung der Methode mittels dreier Testnetze zeigt wichtige Verbesserungen bezüglich Schnelligkeit und Güte der Berechnung, im Vergleich zur früher veröffentlichten Methoden.

     

Improvements in data reduction in direct pulse heating calorimetry

This paper describes improvements introduced in data reduction in direct heating pulse specific heat experiments. In calculations of specific heat, it is necessary to calculate the first derivative of the recorded temperature data as a function of time. The error induced by different numerical differentiation techniques can represent a significant part of the overall measurement error. Thus, different digital filtering techniques, differentiation, and smoothing algorithms were applied and tested to examine their influence on the minimization of errors induced by noise, which is unavoidable in measured signals. A minimum square error criterion was applied in designing digital filters, with arbitrary prescribed magnitude characteristics. Attention was paid to applications when one or more structural phase transitions in the specimen material occur within the temperature range covered by the experiment. The cases where the frequency spectrum of induced noise overlaps with the spectrum of temperature transient signals originating from phase transitions were analyzed in detail. The effectiveness of the methods of extracting the final specific heat data from a noisy signal using different digital filtering techniques is demonstrated.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1995, Köln, Germany.     

Nodes on ropes: a comprehensive data and control flow for steering ensemble simulations

Flood disasters are the most common natural risk and tremendous efforts are spent to improve their simulation and management. However, simulation-based investigation of actions that can be taken in case of flood emergencies is rarely done. This is in part due to the lack of a comprehensive framework which integrates and facilitates these efforts. In this paper, we tackle several problems which are related to steering a flood simulation. One issue is related to uncertainty. We need to account for uncertain knowledge about the environment, such as levee-breach locations. Furthermore, the steering process has to reveal how these uncertainties in the boundary conditions affect the confidence in the simulation outcome. Another important problem is that the simulation setup is often hidden in a black-box. We expose system internals and show that simulation steering can be comprehensible at the same time. This is important because the domain expert needs to be able to modify the simulation setup in order to include local knowledge and experience. In the proposed solution, users steer parameter studies through the World Lines interface to account for input uncertainties. The transport of steering information to the underlying data-flow components is handled by a novel meta-flow. The meta-flow is an extension to a standard data-flow network, comprising additional nodes and ropes to abstract parameter control. The meta-flow has a visual representation to inform the user about which control operations happen. Finally, we present the idea to use the data-flow diagram itself for visualizing steering information and simulation results. We discuss a case-study in collaboration with a domain expert who proposes different actions to protect a virtual city from imminent flooding. The key to choosing the best response strategy is the ability to compare different regions of the parameter space while retaining an understanding of what is happening inside the data-flow system.