Hydrocarbon stress response of four tropical plants in weathered crude oil contaminated soil in microcosms

Responses to hydrocarbon stress of four tropical plants Panicum maximum, Zea mays, Centrosema sp. and Pueraria sp. grown in crude oil contaminated soils (1%, 5% and 10% w/w) were evaluated in a green house. Plants’ percentage survival, shoot heights, biomass development, and phytotoxicity susceptibility were used as indicators of growth, stress response and hydrocarbon tolerance. Relative to control, shoot heights and biomass of plants reduced with increasing hydrocarbon concentration, but 1% w/w oil-in-soil, stimulated shoot heights (5.9% and 6.4%) and weights (21.9% and 2.3%) in P. maximum and Centrosema sp. respectively. P. maximum tolerated the contaminant stress with biomass yields of 113% and 57% of control respectively in 1% and 10% w/w oil-in-soil. All the plants had 100% survival in 1% w/w, but considerably reduced survival in 10% w/w oil-in-soil. These results show that P. maximum has great potential for phytoremediation of petroleum contaminated soil.     

Development of a continuous respirometer

A continuous oxygen uptake meter or continuous respirometer was developed which produced a rapid and reliable response to systemic shocks. The respirometer basically is a 101. Plexiglas laboratory activated sludge unit with a variable volume air tight side car. The feed enters the completely mixed aeration basin and is pumped into the side car. The side car is the site of the oxygen uptake measurements as indicated by a continuously monitoring dissolved oxygen probe. The system was most sensitive to changes in influent concentrations when run at an F/M = 0.1. Response time for a change in DO of 0.1 ppm was less than 4 min. The continuous respirometer was tested employing both synthetic and raw industrial wastes.     

The Options Available for Ammonia Removal at Davyhulme Sewage-Treatment Works

Davyhulme sewage-treatment works, which serves the Manchester drainage area, is one of the lagest in the UK. The dry-weather flow is 300 000 m³/d, and the plant receives a wide range of industrial effluents. The works has been identified as a major source of pollution in the Mersey estuary, with an average discharge of 6500 kg ammonia/day. As part of its initiative to improve the Mersey estuary, North West Water intends to reduce the daily ammonia load from Davyhulme to about 1000 kg/d by 1995. In order to assess the capabilities of both conventional and novel processes to achieve this degree of ammonia removal, a number of on-site pilot plants were established. This paper reports on the pilot-plant studies and the selection of process options. Recommendations with regard to design parameters and final process selection are given.     

Modification of Polycaproamide Composites Based on 1H,1H,13H-rihydroperfluorotridecan-1-ol and Montmorillonite

Fibre Chemistry - Modification of polycaproamide by 1H,1H,13H-trihydroperfluorotridecan-1-ol immobilized on montmorillonite produced an F-containing polymer composite. The structure of the...     

Application of Mathematical Modeling in Technology for the Recovery of Rubber from Latex in a Magnetic Field

Theoretical Foundations of Chemical Engineering - The paper presents a study of the process of the isolation of styrene-butadiene rubber from latex with the method of mathematical planning for a...     

Optimization of Technological Regulation of Container Glass Production: Best Available Technologies,General Binding Rules,and Carbon Intensity of Products

Glass and Ceramics - A system for technological regulation of adverse environmental impacts (AEI) that is based on the best available technologies (BAT) was analyzed. The expediency of updating the...     

Producing Polydicyclopentadiene from Lower-Grade Dicyclopentadiene

Russian Engineering Research - Polymer samples based on polydicyclopentadiene produced from Russian dicyclopentadiene are investigated by thermogravimetric analysis and differential scanning...     

Hydrogenated silicon oxycarbonitride films. Part II. Physicochemical and functional properties

The optical, and electrophysical characteristics of hydrogenated silicon oxycarbonitride films synthesized by the plasma enhanced chemical vapor decomposition of the mixtures of 1,1,1,3,3,3-hexamethyldisilazane with oxygen and nitrogen in the temperature range of 373–973 K have been studied. It has been shown that the obtained films are highly transparent (transmittance is ～92–99%) in the UV, visible, and IR ranges of the spectrum; they have refractive indices in the range of 1.43–2.25, a low reflection coefficient of visible light (nearly 3%), and low dielectric permittivity.     

Copper(I) Bromide‐Dimethyl Sulfide‐Catalyzed Direct Sulfanylation of 4‐Hydroxycoumarins and 4‐Hydroxyquinolinones with Arylsulfonylhydrazides and Selective Fluorescence Switch‐ On Sensing of Cadmium(II) Ion in Water

An efficient protocol for the direct sulfanylation of various 4‐hydroxycoumarins and 4‐hydroxyquinolinones in good yield with arylsulfonylhydrazides as sulfanylating agents was developed via copper(I) bromide⋅dimethyl sulfide‐catalyzed S–O, S–N bond cleavage and C–S cross‐coupling reactions. A highly selective fluorescence turning‐on sensing of cadmium(II) ions in water using the synthesized 3‐sulfanyl‐4‐hydroxycoumarin derivative was also investigated.