Thermal stability of nickel structure obtained by high-pressure torsion in liquid nitrogen

Using transmission electron microscopy and durometry, the structural evolution of commercially pure nickel (99.6%) under high-pressure torsion (HPT) in liquid nitrogen and subsequent annealings in the temperature range 100–400°C has been investigated. In this nickel, at cryogenic temperature, HPT gives rise to a nanocrystalline structure with the record high microhardness (6200 MPa) and average crystallite size ～80 nm. The obtained structure is stable at room temperature and possesses a relatively low thermal stability, since recrystallization occurs at lower temperatures than after conventional deformation or HPT at room temperature.     

Effect of aging on structure and properties of quenched alloy based on orthorhombic titanium aluminide Ti2AlNb

Phase and structural transformations that occur upon the aging of a titanium alloy based on the O phase have been investigated. The formation of a special type of arrangement (zigzag or packet ensembles) of the O-phase plates that arise in the course of the β → O transformation has been detected. Using transmission electron microscopy, the multistage character of structural changes during the α₂ → O transformation has been studied, and a schematic of the occurrence of the transformation has been proposed. The microdurometric characteristics of the indicated alloy that were obtained after different aging regimes have been estimated.     

Reconstructing the Topography of Surface Defects of Ferromagnets in a Normal Magnetization Field

Russian Journal of Nondestructive Testing - The method of reconstructing the topography of defects in a ferromagnet in a normal magnetization field is considered. It is shown that with such...     

Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates

Hemp fibre‐reinforced polycaprolactone (HFRP) composite has inherent good mechanical properties and benefits which include remarkably high specific strength and modulus, low density, and renewability. No doubt, these properties have attracted wider applications of HFRP composite in engineering applications. This paper presents an investigation on the influence of drilling parameters and fibre aspect ratios, AR (0, 19, 26, 30, and 38) on delamination damage factor and surface roughness of HFRP composite laminates utilising high speed steel twist drills under dry machining condition. Taguchi's technique was used in the design of experiment. The results obtained show that increase in cutting speed reduces delamination factor and surface roughness of drilled holes, whereas increase in feed rate causes increase in both delamination factor and surface roughness. Feed rate and cutting speed had the greatest influence on delamination and surface roughness respectively when compared with aspect ratio, while an increase in fibre aspect ratios leads to a significant increase in both delamination factor and surface roughness. The optimum results occurred at cutting speed and feed rate (drilling parameters) of 20 mm/min and 0.10 mm/rev, respectively, when drilling sample of AR 19. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42879.     

Effect of Straining Conditions on Structural Characteristics of Pressed Shape Memory Alloy 45% Ti – 45% Ni – 10% Nb

Metal Science and Heat Treatment - The effect of the temperature-and-rate conditions of straining on the structural characteristics of pressed alloy 45% Ti – 45% Ni – 10% Nb is studied....     

Effect of membrane-electrode-assembly configuration on proton exchange membrane fuel cell performance

Four different membrane-electrode-assemblies (MEAs) with single and dual-layer gas diffusion layers (GDLs) at the anode and the cathode were prepared to examine polarization characteristics that rely on MEA configuration. Porous structure of single and dual-layer GDLs was investigated using a mercury porosimeter. An MEA with dual-layer GDLs at each electrode demonstrated higher performance with an air feed. To comprehend the improvement, the impedance behavior at various current densities and polarization behavior under back pressure were analyzed in terms of oxygen diffusion processes that control catalyst utilization in the gas diffusion electrode.     

Immature Vascular Smooth Muscle Cells in Healthy Murine Arteries and Atherosclerotic Plaques: Localization and Activity

The local development of atherosclerotic lesions may, at least partly, be associated with the specific cellular composition of atherosclerosis-prone regions. Previously, it was demonstrated that a small population of immature vascular smooth muscle cells (VSMCs) expressing both CD146 and neuron-glial antigen 2 is postnatally sustained in atherosclerosis-prone sites. We supposed that these cells may be involved in atherogenesis and can continuously respond to angiotensin II, which is an atherogenic factor. Using immunohistochemistry, flow cytometry, wound migration assay xCELLigence system, and calcium imaging, we studied the functional activities of immature VSMCs in vitro and in vivo. According to our data, these cells do not express nestin, CD105, and the leptin receptor. They are localized in atherosclerosis-prone regions, and their number increases with age, from 5.7% to 23%. Immature VSMCs do not migrate to low shear stress areas and atherosclerotic lesions. They also do not have any unique response to angiotensin II. Thus, despite the localization of immature VSMCs and the presence of the link between their number and age, our study did not support the hypothesis that immature VSMCs are directly involved in the formation of atherosclerotic lesions. Additional lineage tracing studies can clarify the fate of these cells during atherogenesis.     

Structural investigation of nanocrystalline diamond/amorphous carbon composite films

Nanocrystalline diamond/amorphous carbon (NCD/a-C) composite films have been prepared by microwave plasma chemical vapor deposition (MWCVD) from methane/nitrogen mixtures. The complex nature of the coatings required the application of a variety of complementary analytical techniques in order to elucidate their structure. The crystallinity of the samples was studied by selected-area electron diffraction (SAED). The diffraction patterns revealed the presence of diamond crystallites within the films. From the images taken by transmission electron microscopy (TEM) the crystallite size was determined to be on the order of 3–5 nm. The results were confirmed by X-ray diffraction (XRD) measurements exhibiting broad (111) and (220) peaks of diamond from which the average size of the crystallites was calculated. The grain boundary width is 1–1.5 nm as observed by TEM images which corresponds to a matrix volume fraction of about 40–50%. This correlates very well with the crystalline phase content of about 50% in the films estimated from their density (2.75 g/cm³ as determined by X-ray reflectivity). The bonding structure of the composite films was studied by electron energy loss spectroscopy (EELS) in the region of carbon core level. The spectra were dominated by a peak at 292 eV indicating the diamond nature of the investigated films. In addition, the spectra of NCD/a-C films possessed a shoulder at 284 eV due to the presence of a small sp² bonded fraction. This phase was identified also by X-ray photoelectron spectroscopy (XPS). The sp²/sp³ ratio was on the order of 10% as determined by deconvolution of the C1s XPS peak.