Thermodynamic analysis of the refining of technical boron nitride

The efficiency of the process of refining technical boron nitride was assessed based on calculations of the chemical equilibrium in the B-N-O-C-Cl-H system. Three refining mixtures, CCl₄ + H₂, CCl₄ + NH₃ and CHCl₃ + NH₃, were considered. The analysis indicates that the use of ammonia-containing mixtures is more convenient, a lower residual oxygen content, lower contamination of the product by carbon and a better overall boron balance emerging. The calculations of the equilibrium composition of the solid phase enabled suitable technological conditions of the refining process (temperature and starting composition of the gaseous phase) to be established. The calculated results are compared with experimental data, and some observed differences are discussed.     

Synthesis and characterization of phenolic and amino resins based on α, β-unsaturated aldehydes

Phenolic and amino resins on the basis of α,β-unsaturated aldehydes were synthesized in bulk or solution. Catalysts were HCl, H₃PO₄, or formic acid, and in some cases NaOH. The course of the reactions was followed by GPC and NMR while the structure of the reaction products was determined by one- and two-dimensional NMR. The course of the reactions is influenced by experimental conditions: the type of monomers, their molar ratio, the type and quantity of the catalyst, the reaction time and temperature, and the reaction medium. At the beginning of the reaction the addition of a nucleophile to an aldehyde takes place through parallel 1,2-addition to and 1,4-addition to group. Oligomers with ? OH, , and ? CHO functional groups are able to add new monomer units or to react mutually to form higher molecular weight addition and condensation products. The overall rate constants for the beginning of the reactions were between 10^?3 L/mol s for the high reactive mixtures and 10^?7 L/mol s for the less reactive mixtures. The resins were cured by heating at temperatures above 135°C with the addition of hexamethylenetetramine.     

Photo-Chemically-Deposited and Industrial Cu/ZnO/Al2O3 Catalyst Material Surface Structures During CO2 Hydrogenation to Methanol: EXAFS,XANES and XPS Analyses of Phases After Oxidation,Reduction, and Reaction

Catalysis Letters - Industrial Cu/ZnO/Al2O3 or novel rate catalysts, prepared with a photochemical deposition method, were studied under functional CH3OH synthesis conditions at the set temperature...     

轮辐翻边成形冲模参数优化

应用有限元成形分析软件，对轮辐翻边成形过程进行了模拟分析，探讨了不同冲模斜角对翻边变形的影响，以控制变形冲力和轮辐变形区应变分布为目标，对冲模斜角参数进行优化。     

Isobutylene polymerization in the presence of t-BuCl/SnCl4

Summary The effect of tert-butyl chloride in the polymerizations of isobutylene carried out in the presence of SnCl₄ in dichloromethane at temperatures-20°C and-78°C was investigated. Synthesized polyisobutylene samples showed a bimodal molecular weight distribution (MWD) and it was found that the weight content of the lowermolecular weight (LMW) fraction increased with increasing t-BuCl concentration in the polymerization mixture. The effect of ageing of the initiation mixture t-BuCl/SnCl₄ in CH₂Cl₂ prepared in advance on MWD of the PIB samples was also studied. Ageing of the initiation system supports the formation of the LMW fraction and this oily PIB is the only product of the polymerization at-20°C, .     

Fault-Tolerant Formation Driving Mechanism Designed for Heterogeneous MAVs-UGVs Groups

A fault-tolerant method for stabilization and navigation of 3D heterogeneous formations is proposed in this paper. The presented Model Predictive Control (MPC) based approach enables to deploy compact formations of closely cooperating autonomous aerial and ground robots in surveillance scenarios without the necessity of a precise external localization. Instead, the proposed method relies on a top-view visual relative localization provided by the micro aerial vehicles flying above the ground robots and on a simple yet stable visual based navigation using images from an onboard monocular camera. The MPC based schema together with a fault detection and recovery mechanism provide a robust solution applicable in complex environments with static and dynamic obstacles. The core of the proposed leader-follower based formation driving method consists in a representation of the entire 3D formation as a convex hull projected along a desired path that has to be followed by the group. Such an approach provides non-collision solution and respects requirements of the direct visibility between the team members. The uninterrupted visibility is crucial for the employed top-view localization and therefore for the stabilization of the group. The proposed formation driving method and the fault recovery mechanisms are verified by simulations and hardware experiments presented in the paper.     

Structural analysis of Aleksinac oil shale kerogen by high-resolution solid-state C n.m.r. spectroscopy

A sample of kerogen from Aleksinac oil shale was examined by high-resolution solid-state ¹³C n.m.r. spectroscopy. The presence and relative proportions of kerogen structural units were estimated using a combination of NQS and T_1C methods with a peak-synthesis technique applied to the ¹³C CP—MAS spectrum. Relaxation parameters from these experiments were used to estimate differences in relative ‘mobility’ of various structural units. The kerogen was found to be highly aliphatic and to contain 79% long-chain aliphatic plus alicyclic structures, as well as 9% aromatic structures. These findings are in good agreement with the characterization of the same kerogen from its oxidation products.     

Mechanical properties of wollastonite‐reinforced polypropylene composites modified with SEBS and SEBS‐g‐MA elastomers

Mechanical properties of isotactic polypropylene/wollastonite/styrene rubber block copolymers (iPP/wollastonite/SRBC) composites were studied as a function of elastomeric poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) triblock copolymer (SEBS) and SEBS grafted with maleic anhydride (SEBS‐g‐MA) content from 0 to 20 vol%. Microphase morphology was stronger influenced by SRBC elastomers than by different wollastonite types. Higher encapsulation ability of SEBS‐g‐MA than SEBS caused more expressive core‐shell morphology and consequently higher notched impact strength as well as yield parameters, but lower Young's modulus. Higher ductility of the composites with SEBS than with SEBS‐g‐MA has been primarily caused by better miscibility of the polypropylene chains with SEBS molecules. Surface properties of components and adhesion parameters also indicated that adhesion at SEBS‐g‐MA/wollastonite interface, which was stronger than the one at the SEBS/wollastonite interface, influenced higher encapsulation of wollastonite particles by SEBS‐g‐MA. POLYM. ENG. SCI., 47:1873–1880, 2007. © 2007 Society of Plastics Engineers     

Experimental observation of temperature gradients occurring in a single zeolite pellet

An experimental study has been made of temperature profiles incident within a zeolite adsorbent particle in the course of adsorption of n-heptan. Using thermocouple wires 0.1 mm in diameter it has been possible to measure simultaneously the temperatures of the surface and in the centre. It was observed that temperature differences between center of the pellet and ambient stagnant gas may be more than 20°C. The results of this work indicate that the overheating of an adsorbent particle is a very rapid process which is followed by a slow cooling of the hot particle. Experimental data are compared with predictions calculated from the theoretical model.