Probing the local structure of dilute Cu dopants in fluorescent ZnS nanocrystals using EXAFS

A local structure study of ZnS nanocrystals, doped with very low concentrations of Cu, was carried out using the EXAFS technique to better understand how Cu substitutes into the host lattice and forms Cu luminescence centers. We show that a large fraction of the Cu have three nearest neighbor S atoms and the Cu-S bond is significantly shortened compared to Zn-S, by ～0.08 ?. In addition, the second neighbor Cu-Cu peak is extremely small. We propose that Cu occupies an interior site next to a S(2-) vacancy, with the Cu displaced towards the remaining S(2-) and away from the vacancy; such a displacement immediately explains the lack of a significant Cu-Cu peak in the data. There is no evidence for interstitial Cu sites (Cu(i)), indicating that no more than 2% of the Cu are Cu(i.) This study provides new insights into the local structure of the Cu dopant in ZnS without the presence of CuS nanoprecipitates that are present at higher Cu doping levels.     

Pre rigor processing,ageing and freezing on tenderness and colour stability of lamb loins

Forty eight lamb carcasses with temperature and pH monitored were obtained from two commercial plants. At 24 h post mortem both loins (M. longissimus) from each carcass were randomly allocated to a) unaged frozen at − 18 °C, (b) aged at − 1.5 °C for 2 weeks before freezing, (c) aged for 3 weeks before freezing and (d) aged for 9 weeks without freezing. Shear force, colour stability and proteolysis were analyzed. Carcasses with a slower temperature and more rapid pH decline had more calpain autolysis, slightly higher shear force and less colour stable compared to that counterpart in general (P < 0.05). However, the shear force values of the loins were all acceptable (< 6 kgF) regardless of different pre rigor processing and ageing/freezing treatments. Furthermore, the loins aged for 2 weeks-then-frozen/thawed had a similar shear force to the loins aged only for 9 weeks suggesting that ageing-then-freezing would result in equivalent tenderness compared to aged only loins for the long-term storage.     

Slender Monumental Stair Vibration Serviceability

This paper presents the results of an experimental and analytical study of a slender monumental stair. The objective of the study was to gain insight into slender stair vibration issues and provide guidance for the design of such stairs. A slender monumental stair was vibration tested to estimate modal properties and acceleration due to walking. A detailed unadjusted finite-element model was created of the stair using only information that would be available to a designer. The model was used to predict the modal properties and accelerance magnitude. The accelerance magnitude was then used with established harmonic footstep forces to predict the steady-state acceleration due to walking. A factor was developed to account for imperfect resonant buildup, providing reasonable predictions of acceleration due to walking. Design forces were derived based on a set of stair ascent and descent footstep force measurements. An absolute minimum natural frequency is recommended for vertical and horizontal vibrations. Practical aspects of stair vibration analysis are discussed, including the handling of group loading, likely affected occupant locations, and guardrail lateral vibration.     

Dead Zones in LX‐17 and PBX 9502

Pin and X‐ray corner turning data have been taken on ambient LX‐17 and PBX 9052, and the results are listed in tables as an aid to future modeling. The results have been modeled at 4 zones/mm with a reactive flow approach that varies the burn rate as a function of pressure. A single rate format is used to simulate failure and detonation in different pressure regimes. A pressure cut‐off must also be reached to initiate the burn. Corner turning and failure are modeled using an intermediate pressure rate region, and detonation occurs at high pressure. The TATB booster is also modeled using reactive flow, and X‐ray tomography is used to partition the ram‐pressed hemisphere into five different density regions. The model reasonably fits the bare corner turning experiment but predicts a smaller dead zone with steel confinement, in contradiction with experiment. The same model also calculates the confined and unconfined cylinder detonation velocities and predicts the failure of the unconfined cylinder at 3.75 mm radius. The PBX 9502 shows a smaller dead zone than LX‐17. An old experiment that showed a large apparent dead zone in Composition B was repeated with X‐ray transmission and no dead zone was seen. This confirms the idea that a variable burn rate is the key to modeling. The model also produces initiation delays, which are shorter than those found in time‐to‐detonation.     

Rapid design of corner restraining force in deep drawn rectangular parts

With the development of finite element method and computer technology, the complete modeling of the forming of a 3D sheet metal part is becoming realistic. However, an accurate 3D simulation is usually too time-consuming to be used in the early stage of design. One solution is to model the straight side of a 3D part as a plane strain problem and the corner section as an axisymmetric problem. Unfortunately, the axisymmetric solution often over-predicts the severity of the deformation at the corner and leads to a very conservative design. In this study, a modified axisymmetric model with a center offset is proposed to predict tearing failure in the corner sections of 3D parts. The proposed offset is found to be a function of the center strains, failure height, and tooling/process parameters, including tooling geometry, material properties, friction coefficient, and restraining force provided by the binder. Finite element analyses of both 3D and 2D axisymmetric models for square and rectangular cup forming are utilized to verify the proposed concept and to define the function. Excellent predictions of the failure heights are obtained. The proposed model enables engineers to rapidly specify the right amount of the restraining force in the corner section based on the desired center strains and forming depth. A detailed design algorithm is provided.     

在线及离线型激光测厚仪及其应用

介绍在线型和离线型激光测厚仪的技术和应用情况.使用离线型激光测厚仪可以提高挤出口型制作精度、减少口型试验次数、准确检测胶料的挤出膨胀率;使用在线型激光测厚仪可以预测口型的磨损情况,并对挤出胎面进行不间断的实时检测,减少不合格胎面的挤出,两者联合使用可以有效降低胎面生产成本.     

MicroRNA Expression in Clear Cell Renal Cell Carcinoma Cell Lines and Tumor Biopsies: Potential Therapeutic Targets

This study was carried out to quantitate the expression levels of microRNA-17, -19a, -34a, -155, and -210 (miRs) expressed in nine clear cell renal cell carcinoma (ccRCC) and one chromophobe renal cell carcinoma cell line with and without sarcomatoid differentiation, and in six primary kidney tumors with matching normal kidney tissues. The data in the five non-sarcomatoid ccRCC cell lines—RC2, CAKI-1, 786-0, RCC4, and RCC4/VHL—and in the four ccRCC with sarcomatoid differentiation—RCJ41T1, RCJ41T2, RCJ41M, and UOK-127—indicated that miR-17 and -19a were expressed at lower levels relative to miR-34a, -155, and -210. Compared with RPTEC normal epithelial cells, miR-34a, miR-155, and miR-210 were expressed at higher levels, independent of the sarcomatoid differentiation status and hypoxia-inducible factors 1α and 2α (HIFs) isoform expression. In the one chromophobe renal cell carcinoma cell line, namely, UOK-276 with sarcomatoid differentiation, and expressing tumor suppressor gene TP53, miR-34a, which is a tumor suppressor gene, was expressed at higher levels than miR-210, -155, -17, and -19a. The pilot results generated in six tumor biopsies with matching normal kidney tissues indicated that while the expression of miR-17 and -19a were similar to the normal tissue expression profile, miR-210, -155, -and 34a were expressed at a higher level. To confirm that differences in the expression levels of the five miRs in the six tumor biopsies were statistically significant, the acquisition of a larger sample size is required. Data previously generated in ccRCC cell lines demonstrating that miR-210, miR-155, and HIFs are druggable targets using a defined dose and schedule of selenium-containing molecules support the concept that simultaneous and concurrent downregulation of miR-210, miR-155, and HIFs, which regulate target genes associated with increased tumor angiogenesis and drug resistance, may offer the potential for the development of a novel mechanism-based strategy for the treatment of patients with advanced ccRCC.     

A multi-institutional, multinational study of programming concepts using card sort data

Abstract: This paper presents a case study of the use of a repeated single‐criterion card sort with an unusually large, diverse participant group. The study, whose goal was to elicit novice programmers' knowledge of programming concepts, involved over 20 researchers from four continents and 276 participants drawn from 20 different institutions. In this paper we present the design of the study and the unexpected result that there were few discernible systematic differences in the population. The study was one of the activities of the National Science Foundation funded Bootstrapping Research in Computer Science Education project (2003).     

Deuterium trapping by irradiation damage in tungsten induced by different displacement processes

The deuterium trapping behaviors in tungsten damaged by light ions with lower energy (10 keV C⁺ and 3 keV He⁺) or a heavy ion with higher energy (2.8 MeV Fe²⁺) were compared by means of TDS to understand the effects of cascade collisions on deuterium retention in tungsten. By light ion irradiation, most of deuterium was trapped by vacancies, whose retention was almost saturated at the damage level of 0.2 dpa. For the heavy ion irradiation, the deuterium trapping by voids was found, indicating that cascade collisions by the heavy ion irradiation would create the voids in tungsten. Most of deuterium trapped by the voids was desorbed in higher temperature region compared to that trapped by vacancies. It was also found that deuterium could accumulate in the voids, resulting in the formation of blisters in tungsten.