Assessing groundwater contamination risk using the DASTI/IDRISI GIS method: coastal system of western Mamora, Morocco

In this study, the DASTI method was used to evaluate vulnerability to groundwater pollution in the vicinity of Rabat, western Morocco. The model is based on the characterization of five intrinsic parameters: unsaturated zone thickness, saturated zone thickness and lithology, soil texture, topography and hydraulic gradient. A system of classes of the hydrogeological characteristics was applied to evaluate relative vulnerability to groundwater contamination and a susceptibility map was prepared based on land use and the vulnerability index map. The study showed the DASTI method (applied using IDRISI software) can serve as a tool to evaluate vulnerability to pollution and thus facilitate programs to protect groundwater resources. An erratum to this article can be found at     

Sensitive and Reversible Detection of Methanol and Water Vapor by In Situ Electrochemically Grown CuBTC MOFs on Interdigitated Electrodes

The in situ electrochemical growth of Cu benzene‐1,3,5‐tricarboxylate (CuBTC) metal–organic frameworks, as an affinity layer, directly on custom‐fabricated Cu interdigitated electrodes (IDEs) is described, acting as a transducer. Crystalline 5–7 µm thick CuBTC layers are grown on IDEs consisting of 100 electrodes with a width and a gap of both 50 µm and a height of 6–8 µm. These capacitive sensors are exposed to methanol and water vapor at 30 °C. The affinities show to be completely reversible with higher affinity toward water compared to methanol. For exposure to 1000 ppm methanol, a fast response is observed with a capacitance change of 5.57 pF at equilibrium. The capacitance increases in time followed diffusion‐controlled kinetics (k = 2.9 mmol s^?0.5 g^?1_CuBTC). The observed capacitance change with methanol concentration follows a Langmuir adsorption isotherm, with a value for the equilibrium affinity K _e = 174.8 bar^?1. A volume fraction f _MeOH = 0.038 is occupied upon exposure to 1000 ppm of methanol. The thin CuBTC affinity layer on the Cu‐IDEs shows fast, reversible, and sensitive responses to methanol and water vapor, enabling quantitative detection in the range of 100–8000 ppm.     

Photocatalytic degradation of methyl orange dye by NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles under visible irradiation: effect of varying the synthesis temperature

Nanoparticles of nickel ferrites (NiFe₂O₄) were synthesized at different temperature of synthesis (25, 50 and 80 °C) through the chemical co-precipitation method. The synthesized powders were characterized using X-ray diffraction for crystallite size and lattice parameter calculation. It reveals the presence of cubic spinel structure of ferrites with crystallite size between 29 and 41 nm. Transmission electron microscopy and scanning electron microscopy showed uniform distribution of ferrite particles with some agglomeration. The Fourier-transform infrared spectroscopy showed absorption bonds, which were assigned to the vibration of tetrahedral and octahedral complexes. Raman spectroscopy is used to verify that we have synthesized ferrite spinels and determines their phonon modes. The thermal decomposition of the NiFe₂O₄ was investigated by TGA/DTA. The optical study UV–visible is used to calculate the band gap energy. Magnetic measurements of the samples were carried out by means of vibrating sample magnetometer and these studies reveal that the formed nickel ferrite exhibits ferromagnetic behavior. Photoluminescence showed three bands of luminescence located at 420, 440 and 535 nm. The photocatalytic properties of nickel ferrite (NiFe₂O₄) nanoparticles were evaluated by studying the photodecomposition of methyl orange as organic pollutant models and showed a good photocatalytic activity.     

Parallel machine scheduling with tool loading: a constraint programming approach

This paper presents constraint programming models that aim to solve scheduling and tool assignment problems in parallel machine environments. There are a number of jobs to be processed on parallel machines. Each job requires a set of tools, but limited number of tools are available in the system due to economic restrictions. The problem is to assign the jobs and the required tools to machines and to determine the schedule so that the makespan is minimised. Three constraint programming models are developed and compared with existing methods described in the literature.     

Co0.5TiOPO4: Crystal structure, magnetic and electrochemical properties

The new titanium oxyphosphate Co_0.5TiPO₅ has been prepared by solid state reaction. Its structure has been determined by single crystal X-ray diffraction and was further investigated by FT-IR spectroscopy and magnetic measurements. The compound crystallizes in the monoclinic system, S.G: P2₁/c [a = 7.358(1) Å, b = 7.378(2) Å, c = 7.383(3) Å, β = 119.66(3)°, Z = 4, R₁ = 0.0142, wR₂ = 0.0429]. The structure can be described as a network of very distorted TiO₆ octahedra, in which the Ti⁴⁺ ions are displaced from the centres of the octahedra, and slightly distorted PO₄ tetrahedra. Half of the octahedral cavities are occupied by Co atoms. The other half of octahedral sites is vacant and favourable for the electrochemical insertion of lithium. The insertion of lithium was studied by galvanostatic charging and discharging between different voltage limits.     

Evaluation of Flexural Behavior and Serviceability Performance of Concrete Beams Reinforced with FRP Bars

Flexural behavior and serviceability performance of 24 full-scale concrete beams reinforced with carbon-, glass-, and aramid-fiber-reinforced-polymer (FRP) bars are investigated. The beams were 3,300?mm long with a rectangular cross section of 200?mm in width and 300?mm in depth. Sixteen beams were reinforced with carbon-FRP bars, four beams were reinforced with glass-FRP bars, two beams were reinforced with aramid-FRP bars, and two were reinforced with steel, serving as control specimens. Two types of FRP bars with different surface textures were considered: sand-coated bars and ribbed-deformed bars. The beams were tested to failure in four-point bending over a clear span of 2,750?mm. The test results are reported in terms of deflection, crack-width, strains in concrete and reinforcement, flexural capacity, and mode of failure. The experimental results were compared to the available design codes.     

Field evaluation of two bait delivery systems for the oral immunization of dogs against rabies in Tunisia

In a study of the relation between foot pain and disability, a cross-sectional analysis was performed using baseline data (1992-1995) from the Women's Health and Aging Study, a population-based study of 1,002 disabled women aged 65 years and older living in Baltimore, Maryland. Chronic and severe foot pain, defined as pain lasting 1 month or longer in the previous year, plus pain in the previous month rated severe (7-10 on a scale of 0 to 10), was reported by 14% of the women. Severe foot pain was more common in women who were younger (aged 65-74 years), obese, or had hand or knee osteoarthritis. Walking speed and five repeated chair stands were slower in women with foot pain. After adjustment for age, body mass index, race, education, self-rated health, smoking status, comorbidities, and number of other pain sites, severe foot pain was independently associated with increased risk for walking difficulty (adjusted odds ratio = 1.69, 95% confidence interval 1.10-2.59) and disability in activities of daily living (adjusted odds ratio = 1.91, 95% confidence interval 1.21-3.01). These findings suggest that severe foot pain may play a key role in disability in older women. Further studies are warranted to confirm these results longitudinally and to determine whether interventions to alleviate foot pain could reduce or prevent disability in older women.