The hydrogenation of toluene over nickel loaded Y zeolites

The catalytic activities of a range of hydrogen reduced nickel Y zeolites for the hydrogenation of toluene were measured and correlated with the following catalytic parameters: reaction temperature; reaction time; coke deposition. The role of the alkali metal co-cation (Li⁺, Na⁺, K⁺, Rb⁺ or Cs⁺) in influencing the overall hydrogenation activity of the supported nickel metal was probed. The effect of poisoning the surface Bronsted acidity by the adsorption of ammonia is discussed. For comparative purposes, data on the hydrogenation of benzene over the same catalysts are included.     

Incorporating a Polyethyleneglycol Linker to Enhance the Hydrophilicity of Mitochondria-Targeted Triphenylphosphonium Constructs

The targeting of bioactive molecules and probes to mitochondria can be achieved by coupling to the lipophilic triphenyl phosphonium (TPP) cation, which accumulates several hundred-fold within mitochondria in response to the mitochondrial membrane potential (Δψ_m). Typically, a simple alkane links the TPP to its “cargo”, increasing overall hydrophobicity. As it would be beneficial to enhance the water solubility of mitochondria-targeted compounds we explored the effects of replacing the alkyl linker with a polyethylene glycol (PEG). We found that the use of PEG led to compounds that were readily taken up by isolated mitochondria and by mitochondria inside cells. Within mitochondria the PEG linker greatly decreased adsorption of the TPP constructs to the matrix-facing face of the mitochondrial inner membrane. These findings will allow the distribution of mitochondria-targeted TPP compounds within mitochondria to be fine-tuned.     

Score statistics for testing serial dependence in count data

In this study, we extend earlier work of Freeland (1998) and Jung and Tremayne (2003) , and develop a general formula for a score statistic to test for dependence in an integer autoregressive process with an arbitrary arrivals distribution. We give two statistics that cater for arrivals processes that may be under‐, equi‐ or overdispersed. The first is based on the Katz family which includes Poisson, binomial and negative binomial distributions as special cases. The second uses the generalized Poisson which includes the Poisson distribution as a special case and can also cater for under‐ and over‐ dispersion. The null distribution of the tests is provided and consistency is discussed. Size and power properties are investigated under different model assumptions by Monte Carlo simulations. The autocorrelation coefficient is also investigated as a benchmark for comparison.     

Molecular Networking for Drug Toxicities Studies: The Case of Hydroxychloroquine in COVID-19 Patients

Using drugs to treat COVID-19 symptoms may induce adverse effects and modify patient outcomes. These adverse events may be further aggravated in obese patients, who often present different illnesses such as metabolic-associated fatty liver disease. In Rennes University Hospital, several drug such as hydroxychloroquine (HCQ) have been used in the clinical trial HARMONICOV to treat COVID-19 patients, including obese patients. The aim of this study is to determine whether HCQ metabolism and hepatotoxicity are worsened in obese patients using an in vivo/in vitro approach. Liquid chromatography high resolution mass spectrometry in combination with untargeted screening and molecular networking were employed to study drug metabolism in vivo (patient’s plasma) and in vitro (HepaRG cells and RPTEC cells). In addition, HepaRG cells model were used to reproduce pathophysiological features of obese patient metabolism, i.e., in the condition of hepatic steatosis. The metabolic signature of HCQ was modified in HepaRG cells cultured under a steatosis condition and a new metabolite was detected (carboxychloroquine). The RPTEC model was found to produce only one metabolite. A higher cytotoxicity of HCQ was observed in HepaRG cells exposed to exogenous fatty acids, while neutral lipid accumulation (steatosis) was further enhanced in these cells. These in vitro data were compared with the biological parameters of 17 COVID-19 patients treated with HCQ included in the HARMONICOV cohort. Overall, our data suggest that steatosis may be a risk factor for altered drug metabolism and possibly toxicity of HCQ.     

Doublecortin May Play a Role in Defining Chondrocyte Phenotype

Embryonic development of articular cartilage has not been well understood and the role of doublecortin (DCX) in determination of chondrocyte phenotype is unknown. Here, we use a DCX promoter-driven eGFP reporter mouse model to study the dynamic gene expression profiles in mouse embryonic handplates at E12.5 to E13.5 when the condensed mesenchymal cells differentiate into either endochondral chondrocytes or joint interzone cells. Illumina microarray analysis identified a variety of genes that were expressed differentially in the different regions of mouse handplate. The unique expression patterns of many genes were revealed. Cytl1 and 3110032G18RIK were highly expressed in the proximal region of E12.5 handplate and the carpal region of E13.5 handplate, whereas Olfr538, Kctd15, and Cited1 were highly expressed in the distal region of E12.5 and the metacarpal region of E13.5 handplates. There was an increasing gradient of Hrc expression in the proximal to distal direction in E13.5 handplate. Furthermore, when human DCX protein was expressed in human adipose stem cells, collagen II was decreased while aggrecan, matrilin 2, and GDF5 were increased during the 14-day pellet culture. These findings suggest that DCX may play a role in defining chondrocyte phenotype.     

Quantification of grain boundary defect chemistry in a mixed proton-electron conducting oxide composite

Dual phase oxide membranes have shown promising hydrogen permeation fluxes in syngas applications due to their high mixed proton electron conduction (MPEC). However, the conductivity of grain boundaries can be many orders of magnitude lower than that of the bulk and so limits the total conductivity and hydrogen permeation. In this study, the three-dimensional nanoscale oxygen and cation distributions around grain and phase boundaries in a BaCe_0.8Y_0.2O_3-δ-Ce_0.8Y_0.2O_2-δ (BCY-YDC) membrane were quantified by atom probe tomography (APT) and related to average grain boundary conductivity measured by electrochemical impedance spectroscopy (EIS). Segregation varied among the general high-angle grain boundaries analyzed, but no trend from orientation analysis was determined. Correlative APT and electron energy loss spectroscopy (EELS) of one YDC grain boundary revealed composition and cerium valence information, respectively, allowing for the determination of vacancies at the grain boundary. While a specific MPEC membrane is characterized, the results are relevant to proton and electron conduction in a number of technologically important ceramics.     

Glycosylation in Indolent,Significant and Aggressive Prostate Cancer by Automated High-Throughput N-Glycan Profiling

The diagnosis and treatment of prostate cancer (PCa) is a major health-care concern worldwide. This cancer can manifest itself in many distinct forms and the transition from clinically indolent PCa to the more invasive aggressive form remains poorly understood. It is now universally accepted that glycan expression patterns change with the cellular modifications that accompany the onset of tumorigenesis. The aim of this study was to investigate if differential glycosylation patterns could distinguish between indolent, significant, and aggressive PCa. Whole serum N-glycan profiling was carried out on 117 prostate cancer patients’ serum using our automated, high-throughput analysis platform for glycan-profiling which utilizes ultra-performance liquid chromatography (UPLC) to obtain high resolution separation of N-linked glycans released from the serum glycoproteins. We observed increases in hybrid, oligomannose, and biantennary digalactosylated monosialylated glycans (M5A1G1S1, M8, and A2G2S1), bisecting glycans (A2B, A2(6)BG1) and monoantennary glycans (A1), and decreases in triantennary trigalactosylated trisialylated glycans with and without core fucose (A3G3S3 and FA3G3S3) with PCa progression from indolent through significant and aggressive disease. These changes give us an insight into the disease pathogenesis and identify potential biomarkers for monitoring the PCa progression, however these need further confirmation studies.     

Scalable measurements of tow architecture variability in braided ceramic composite tubes

The performance of braided ceramic matrix composites has been shown to depend on the spatial arrangement of tows; therefore, a new class of tools is required to measure irregularities in the composite architecture for components with intricate geometries. We report a scalable and robust reconstruction technique built upon stereoscopic digital image correlation that is able to efficiently measure the position of tows in arbitrarily shaped composites. This method was applied to triaxially braided ceramic matrix composite tubes intended for use as nuclear fuel cladding, which revealed both long‐range “systematic” tow packing defects associated with the manufacturing process and short‐range “intrinsic” defects due to the braid architecture. These findings suggested that the character of tow spacing variation in braided composite tubes was substantially more complex than in planar woven composites. These measurements are expected to lead to improved processing of braided composites and to facilitate the design of statistically representative virtual specimens for finite element modeling.     

Effect of organic chelates on the performance of hybrid sol–gel coated AA 2024-T3 aluminium alloys

Sol–gels are organic–inorganic polymers formed by hydrolysis/condensation reactions of alkoxide precursors, primarily silanes, which have found applications as electronic, optical and protective coatings. These coatings possess important characteristics such as chemical stability, physical strength and scratch resistance. Further performance improvement is achieved through the incorporation of zirconium and titanium based nanoparticles, also formed through the sol–gel process. However due to the inherent difference in the reactivity of the precursors, the hydrolysis of each precursor must be carried out separately before being combined for final condensation. Zirconium precursors are commonly chelated using acetic acids, prior to hydrolysis, to lower the hydrolysis rate.In this body of work various ligands such as organic acids, acetyl acetone (AcAc) and 2,2′-bipyridine (Bipy) were used to control the zirconium hydrolysis reaction and form nanoparticles within the silane sol matrix.Nanoparticle modified coatings formed from the silane sol on AA 2024-T3 aluminium were characterised spectroscopically, electrochemically and calorimetrically to evaluate the potential effect of the different chelates on the final film properties while neutral salt spray tests were performed to study their anti-corrosion performance. Results indicate that the acid ligand modified coatings provided the best performance followed by AcAc, while Bipy was the poorest. In all cases the zirconium nanoparticle improved the protective properties of the sol–gel coating.     

The degradation of electrochemically polymerised poly (3-aminophenol) films in sodium hydroxide solutions for the production of microelectrode ensembles

Poly (3-aminophenol) films have been grown electrochemically from solutions of 3-aminophenol at pH 7. These pinhole free films passivate the electrode surface and are less than 10 nm thick. The films are stable in 1 M solutions of sulphuric acid. However, they are rapidly degraded in solutions of sodium hydroxide. It is demonstrated that initially the polymer removal results in the creation of an electrode that exhibits the characteristics of a microelectrode ensemble. However, as further polymer is removed these characteristics are lost and response of the electrode resembles that of a large planar electrode. This chemical treatment of poly (3-aminophenol) films allows for the cost-effective production of microelectrode ensembles.