Crystallization studies of semi-crystalline polymers under oscillatory shear using the rheometrics mechanical spectrometer

A method has been developed on the Rheometrics mechanical spectrometer using the eccentric rotating disks mode to study the crystallization kinetics of different semi-crystalline polymers (polyethylene, polypropylene, poly(butylene terephthalate) and Nylon 11) under oscillatory shear. Dynamic shear moduli (storage G′ and loss G″), loss tangent (tan δ), and dynamic viscosity (η′) were simultaneously, monitored during the crystallization process. The onset and completion of crystallization were characterized by the initial rise and final levelling off of G′, while the peak time, of crystallization (t_p) is calculated from the time elapsed between the onset and peak of crystallization which is indicated by the G″ or η′ maximum. In the case of polypropylene, going from a low frequency of ?0.1 rad/s, to higher frequencies of up to 10 rad/s, there is a monotonic decrease in peak time of crystallization (t_p) together with a progressive decrease in spherulitic morphology. The observed acceleration in crystallization is due predominantly to the increase in nucleation rate and orientation of chains in melt crystalline aggregate. The progressive disappearance of the spherulitic morphology is attributed to the disruption of the spherulite superstructure at higher frequencies of shear.     

Direct Measurement of Transformation Zone Strains in Toughened Zirconia

Residual strains responsible for crack tip shielding have been measured within transformation zones surrounding cracks in Mg-PSZ. Two techniques were used for strain measurement: moiré interferometry and high-resolution image matching. Both methods provide maps of differential in-plane displacements within the specimen surface intersected by the crack, the latter method with the higher resolution. The results are compared with finite-element analysis to assess surface relaxation effects, and the measured strains are used to evaluate the crack tip shielding stress intensity factor. Calculations based on the assumption that the unconstrained transformation strain is hydrostatic dilatation yielded results that were significantly smaller than the measured toughness increases.     

The stability and unfolding of an IgG binding protein based upon the B domain of protein A from Staphylococcus aureus probed by tryptophan substitution and fluorescence spectroscopy

The stability and unfolding of an immunoglobulin (Ig) G bindingprotein based upon the B domain of protein A (SpAB) from Staphylococcusaureus were studied by substituting tryptophan residues at strategiclocations within each of the three a-helical regions (al-a3)of the domain. The role of the C-terminal helix, a3, was investigatedby generating two protein constructs, one corresponding to thecomplete SpAB, the other lacking a part of ct3; the Trp substitutionswere made in both one-and two-domain versions of each of theseconstructs. The fluorescence properties of each of the single-tryptophanmutants were studied in the native state and as a function ofguanidine-HCl-mediated unfolding, and their IgG binding activitieswere determined by a competitive enzyme-linked immunosorbentassay. The free energies of folding and of binding to IgG foreach mutant were compared with those for the native domains.The effect of each substitution upon the overall structure andupon the IgG binding interface was modelled by molecular graphicsand energy minimization. These studies indicate that (i) 3 contributesto the overall stability of the domain and to the formationof the IgG binding site in l and 2, and (ii) al unfolds first,followed by 2 and 3 together.     

Analysis and simulation of the grinding process. Part II: Mechanics of grinding

This paper is the second of three parts which describe the analysis and simulation of the grinding process. Generation of the workpiece surface depends on the interactions between the grains of the wheel and the workpiece. The grinding wheel surface generated by dressing was simulated by the method described in Part I. This part describes a method to investigate the process of grinding by simulating the cutting action of every grain which engages with the workpiece. Grinding forces are analysed by simulating the force on each grain which passes a section of the workpiece. The simulated workpiece surface shows features which are similar in nature to the experimental results. A more extensive comparison of simulated and experimental grinding behaviour is presented in Part III.     

Analysis and simulation of the grinding process. Part I: Generation of the grinding wheel surface

This paper is in three parts describing the analysis and simulation of the grinding process. This first part is concerned with the generation of the wheel surface by single point diamond dressing. In grinding, the grinding wheel has to be dressed periodically to restore wheel form and cutting efficiency. Understanding the process of generating the grinding wheel surface is important for the control of the grinding process. Generation of the wheel surface is simulated as a single diamond dressing process on a computer generated wheel. The wheel is simulated by grains randomly spaced in the wheel volume. The topography of the wheel cutting surface is generated by simulating the action of an ideal dressing tool as it dresses the wheel. The simulation of the wheel topography takes account of the motion of the dressing tool, grain size, grain spacing, grain fracture and grain break-out. The simulated cutting surface is used for further simulations of grinding. The simulation of grinding using the simulated grinding wheel surface is described in Sections 2 and 3 where a comparison is made of results predicted from simulation with results obtained from experiments. By matching simulated and experimental results, it is possible to explain the relative importance of dressing and grinding parameters.     

Driving a Wedge Between Evidence and Beliefs: How Online Ideological News Exposure Promotes Political Misperceptions

This article has 2 goals: to provide additional evidence that exposure to ideological online news media contributes to political misperceptions, and to test 3 forms this media‐effect might take. Analyses are based on representative survey data collected during the 2012 U.S. presidential election (N = 1,004). Panel data offer persuasive evidence that biased news site use promotes inaccurate beliefs, while cross‐sectional data provide insight into the nature of these effects. There is no evidence that exposure to ideological media reduces awareness of politically unfavorable evidence, though in some circumstances biased media do promote misunderstandings of it. The strongest and most consistent influence of ideological media exposure is to encourage inaccurate beliefs regardless of what consumers know of the evidence.     

Safe Autonomous Agent Formation Operations Via Obstacle Collision Avoidance

In this paper, we consider the problem of flocking and shape‐orientation control of multi‐agent systems with inter‐agent and obstacle collision avoidance. We first consider the problem of forcing a set of autonomous agents to form a desired formation shape and orientation while avoiding inter‐agent collision and collision with convex obstacles, and following a trajectory known to only one of the agents, namely the leader of the formation. Then we build upon the solution given to this problem and solve the problem of guaranteeing obstacle collision avoidance by changing the size and the orientation of the formation. Changing the size and the orientation of the formation is helpful when the agents want to go through a narrow passage while the existing size or orientation of the formation does not allow this. We also propose collision avoidance algorithms that temporarily change the shape of the formation to avoid collision with stationary or moving nonconvex obstacles. Simulation results are presented to show the performance of the proposed control laws.     

Visualization experience and related process modeling

The visualization process is a transformation of information content into knowledge via a visual representation. Visualization experience, proposed herein, reflects human sensations arising during the visualization process. It provides a basis in which to objectively measure and evaluate human participation in the visualization process; and thereby provides methods of control. Visualization experience modeling allows leveraging on the natural environment to augment understanding, therefore improve decision making. The application emphasis in this paper is on the theoretical development of visualization experience in the visualization process as applied to Ambient Assisted Living and Clinical Decision Support Systems.     

RSS – MORE THAN JUST NEWS FEEDS

RSS (Really Simple Syndication/RDF Site Summary) is a simple lightweight format that was originally used for news alerts and content syndication. It is now being used in a wide range of applications. This paper describes the background to RSS and describes the various ways in which RSS can be used. Examples are provided of the ways in which RSS can be viewed and the variety of approaches for creating RSS. The paper argues that, although there is still confusion over the different types of RSS standards, the format is an essential for use in digital library services.