Polystyrene and poly(methyl methacrylate) interfaces reinforced with diblock carbon nanotubes

An asymmetric double cantilever beam test was used to determine the ability of carbon nanotubes with varying chemistry along their lengths, that is, diblock nanotubes, to compatibilize the polystyrene/poly(methyl methacrylate) (PS/PMMA) interface. PS molecules were grafted primarily to one of the blocks to cause that block to migrate to the PS phase since otherwise both blocks would prefer to reside in PMMA. Fracture toughnesses increased monotonically with increasing diblock carbon nanotube concentration and maximum values were like those for block copolymer-reinforced interfaces while single-chemistry nanotubes showed no reinforcing effect. However, the abrupt increase in fracture toughness with added compatibilizer indicative of a transition to crazing was not found consistent with nanotubes suppressing crazing in homopolymers. Scanning electron microscopy images of the fractured surfaces show agglomerates of carbon nanotubes present which are likely limiting the efficacy of carbon nanotubes at toughening the interface.     

Analysis and simulation of the grinding process. Part II: Mechanics of grinding

This paper is the second of three parts which describe the analysis and simulation of the grinding process. Generation of the workpiece surface depends on the interactions between the grains of the wheel and the workpiece. The grinding wheel surface generated by dressing was simulated by the method described in Part I. This part describes a method to investigate the process of grinding by simulating the cutting action of every grain which engages with the workpiece. Grinding forces are analysed by simulating the force on each grain which passes a section of the workpiece. The simulated workpiece surface shows features which are similar in nature to the experimental results. A more extensive comparison of simulated and experimental grinding behaviour is presented in Part III.     

Analysis and simulation of the grinding process. Part I: Generation of the grinding wheel surface

This paper is in three parts describing the analysis and simulation of the grinding process. This first part is concerned with the generation of the wheel surface by single point diamond dressing. In grinding, the grinding wheel has to be dressed periodically to restore wheel form and cutting efficiency. Understanding the process of generating the grinding wheel surface is important for the control of the grinding process. Generation of the wheel surface is simulated as a single diamond dressing process on a computer generated wheel. The wheel is simulated by grains randomly spaced in the wheel volume. The topography of the wheel cutting surface is generated by simulating the action of an ideal dressing tool as it dresses the wheel. The simulation of the wheel topography takes account of the motion of the dressing tool, grain size, grain spacing, grain fracture and grain break-out. The simulated cutting surface is used for further simulations of grinding. The simulation of grinding using the simulated grinding wheel surface is described in Sections 2 and 3 where a comparison is made of results predicted from simulation with results obtained from experiments. By matching simulated and experimental results, it is possible to explain the relative importance of dressing and grinding parameters.     

The in-line inspection of carbon anodes for aluminum production

In this paper, methods for measuring the quality of carbon anodes consumed in the commercial production of aluminum are discussed. The electrical and mechanical qualities of these anodes are important for the economic operation of the aluminum plant. While the investigation is ongoing, results from tests made at an aluminum reduction plant are included. The methods reviewed include direct resistivity measurement using core samples, ultrasonic measurement, the hammer method, analysis of the Hall effect, the four-probe method, and use of magnetic coils (various arrangements).     

Driving a Wedge Between Evidence and Beliefs: How Online Ideological News Exposure Promotes Political Misperceptions

This article has 2 goals: to provide additional evidence that exposure to ideological online news media contributes to political misperceptions, and to test 3 forms this media‐effect might take. Analyses are based on representative survey data collected during the 2012 U.S. presidential election (N = 1,004). Panel data offer persuasive evidence that biased news site use promotes inaccurate beliefs, while cross‐sectional data provide insight into the nature of these effects. There is no evidence that exposure to ideological media reduces awareness of politically unfavorable evidence, though in some circumstances biased media do promote misunderstandings of it. The strongest and most consistent influence of ideological media exposure is to encourage inaccurate beliefs regardless of what consumers know of the evidence.     

Distributed formation control with relaxed motion requirements

Heterogeneous formation shape control with interagent bearing and distance constraints involves the design of a distributed control law that ensures the formation moves such that these interagent constraints are achieved and maintained. This paper looks at the design of a distributed control scheme to solve different formation shape control problems in an ambient two‐dimensional space with bearing, distance and mixed bearing and distance constraints. The proposed control law allows the agents in the formation to move in any direction on a half‐plane and guarantees that despite this freedom, the proposed shape control algorithm ensures convergence to a formation shape meeting the prescribed constraints. This work provides an interesting and novel contrast to much of the existing work in formation control where distance‐only constraints are typically maintained and where each agent's motion is typically restricted to follow a very particular path. A stability analysis is sketched, and a number of illustrative examples are also given. Copyright © 2014 John Wiley & Sons, Ltd.     

Gaming Social Capital: Exploring Civic Value in Multiplayer Video Games

Recent research suggests that social interactions in video games may lead to the development of community bonding and prosocial attitudes. Building on this line of research, a national survey of U.S. adults finds that gamers who develop ties with a community of fellow gamers possess gaming social capital, a new gaming‐related community construct that is shown to be a positive antecedent in predicting both face‐to‐face social capital and civic participation.     

Safe Autonomous Agent Formation Operations Via Obstacle Collision Avoidance

In this paper, we consider the problem of flocking and shape‐orientation control of multi‐agent systems with inter‐agent and obstacle collision avoidance. We first consider the problem of forcing a set of autonomous agents to form a desired formation shape and orientation while avoiding inter‐agent collision and collision with convex obstacles, and following a trajectory known to only one of the agents, namely the leader of the formation. Then we build upon the solution given to this problem and solve the problem of guaranteeing obstacle collision avoidance by changing the size and the orientation of the formation. Changing the size and the orientation of the formation is helpful when the agents want to go through a narrow passage while the existing size or orientation of the formation does not allow this. We also propose collision avoidance algorithms that temporarily change the shape of the formation to avoid collision with stationary or moving nonconvex obstacles. Simulation results are presented to show the performance of the proposed control laws.