Evidence for the Participation of Singlet Oxygen in the Vat–dye Photosensitized Degradation of Cellulose

A study has been made of the vat–dye photosensitized degradation of cellulose. Whilst the part played by the dyes in direct hydrogen abstraction from a cellulose substrate cannot be overlooked, it is apparent that the role played by singlet oxygen is important. The ability of a dye to produce singlet oxygen has been studied by measuring the amount of tetraphenylcyclopentadienone the dye can photo–oxidize. It would appear that the singlet oxygen is initially formed in its high energy g state by energy transfer from the triplet state of the dye to ground state molecular oxygen. Luminescence spectroscopy has been employed in order to gain information about the excited state energies of the dye molecules, and an electron spin resonance study of the dyes in rigid media has been carried out in order to obtain information about the triplet state.     

In Situ Processing of Silicon Carbide Layer Structures

A novel route to low-cost processing of silicon carbide (SiC) layer structures is desribed. The processing involves pressureless liquid-phase cosintering of compacted power layers of SiC, containing alumina (Al₂O₃) and yttria (Y₂O₃ sintering additives to yield and yttrium aluminum garnet (YAG) second phase. By adjusting the β:α SiC phase ratios in the individual starting powders, alternate layers with distinctively different microstructures are produced: (i) "homogeneous" microstructures, with fine equiaxed SiC grains, designed for high strength; and (ii) "heterogeneous: microstructures with coarse and elongate SiC grains, designed for high toughness. By virtue of the common SiC and YAG phases, the interlayer interfaces are chemically compatible and strongly bonded. Exploratory Hertzian indetation tests across a bilayer interface confirm the capacity of the tough heterogeneous layer to inhibit potentially dangerous cracks propagating through the homogeneous layer. The potential for application of this novel processing approach to other layer architectures and other ceramic systems is considered.     

Modeling solute diffusion in aqueous polymer solutions

There are numerous models describing solute diffusion in polymer solutions. An analysis of these models demonstrates that none can provide a consistent explanation of the phenomenon observed for solutes that can be modeled as essentially solid spheres. For this reason, a new model based on a physical obstruction approach is presented. In this model, solute movement in the presence of polymer chains is assumed to be governed by the probability of the solute molecule encountering a series of openings between the chains larger than its hydrodynamic radius. The model is tested against data taken from the literature for a series of polymer solutions and solute probes and found to provide good agreement to the effects of solute size, polymer concentration, and polymer flexibility.     

Determination of diffusion coefficients of water in cellulose acetate membranes

The determination of the diffusion coefficient for water in various porosity cellulose acetate membranes by a gravimetric method, using a humidified carrier gas, is described. It was found to be impossible to obtain meaningful results for very porous membranes, although dense membranes gave limiting values of diffusion coefficient at high carrier gas velocities. This phenomenon is explained in terms of the dissipation of the heat of sorption by the forced convection provided by the carrier gas. The variation of diffusion coefficient with concentration of water in dense cellulose acetate is explained in terms of clustering of water molecules in the polymer at high concentration.     

A vibrational study of the activation sequence of C–H and C–C bonds of isobutene and 1-butene on Mo(110) and (4 × 4)-C/Mo(110) surfaces

The thermal decomposition pathways of isobutene and 1-butene on both Mo(110) and 4 × 4-C/Mo(110) surfaces have been studied using high-resolution electron energy loss spectroscopy (HREELS) in order to highlight the substantially different activities of these two surfaces towards the cleavage of C–H and C–C bonds. On clean Mo(110), the CH₂ group of isobutene decomposes upon heating to 150 K, producing either a /-bonded isobutenylidene [(CH₃)₂CCH] species or a 1,1-di-/-bonded isobutenyl [(CH₃)₂CC] species. Upon further heating, extensive C–H bond scission occurs to form hydrocarbon fragments which do not contain CH₃ or CH₂ groups, but appear to have largely intact carbon skeletons. By contrast, isobutene is molecularly adsorbed on the carbide-modified surface at 150 K. Further heating produces isobutylidyne [(CH₃)₂HCC] by 300 K, which subsequently decomposes via C–C bond scission to generate surface methyl groups. The different activation sequence of the C–H and C–C bonds of isobutene on clean and carbide-modified Mo(110) surfaces is also qualitatively confirmed by comparative studies of 1-butene on the two surfaces.     

Visual learning and classification of human epithelial type 2 cell images through spontaneous activity patterns

Identifying the presence of anti-nuclear antibody (ANA) in human epithelial type 2 (HEp-2) cells via the indirect immunofluorescence (IIF) protocol is commonly used to diagnose various connective tissue diseases in clinical pathology tests. As it is a labour and time intensive diagnostic process, several computer aided diagnostic (CAD) systems have been proposed. However, the existing CAD systems suffer from numerous shortcomings due to the selection of features, which is commonly based on expert experience. Such a choice of features may not work well when the CAD systems are retasked to another dataset. To address this, in our previous work, we proposed a novel approach that learns a set of filters from HEp-2 cell images. It is inspired by the receptive fields in the mammalian's vision system, since the receptive fields can be thought as a set of filters for similar shapes. We obtain robust filters for HEp-2 cell classification by employing the independent component analysis (ICA) framework. Although, this approach may be held back due to one particular problem; ICA learning requires a sufficiently large volume of training data which is not always available. In this paper, we demonstrate a biologically inspired solution to address this issue via the use of spontaneous activity patterns (SAP). The spontaneous activity patterns, which are related to the spontaneous neural activities initialised by the chemical release in the brain, are found as the typical stimuli for the visual cell development of newborn animals. In the classification system for HEp-2 cells, we propose to model SAP as a set of small image patches containing randomly positioned Gaussian spots. The SAP image patches are generated and mixed with the training images in order to learn filters via the ICA framework. The obtained filters are adopted to extract the set of responses from a HEp-2 cell image. We then employ regions from this set of responses and stack them into “cubic regions”, and apply a classification based on the correlation information of the features. We show that applying the additional SAP leads to a better classification performance on HEp-2 cell images compared to using only the existing patterns for training ICA filters. The improvement on classification is particularly significant when there are not enough specimen images available in the training set, as SAP adds more variations to the existing data that makes the learned ICA model more robust. We show that the proposed approach consistently outperforms three recently proposed CAD systems on two publicly available datasets: ICPR HEp-2 contest and SNPHEp-2.     

Crack Growth in Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling

This paper addresses the damage and fracture issues of glass and ceramic materials used in solid oxide fuel cells. Analyses of an internal crack and of an interface crack between dissimilar materials were conducted using a modified boundary layer modeling approach. In this approach, fracture is allowed to occur in a small process window situated at an initial crack tip. Elastic displacement crack-tip fields are prescribed as remote boundary conditions. Crack propagation was first modeled discretely. Next, a continuum damage mechanics (CDM) model for brittle materials was developed to capture damage and crack growth in the process window. In particular, the damage model was applied to a glass-ceramic material that had been developed in-house for sealing purposes. Discrete and continuum damage solutions were then compared. Finally, the CDM model was used to determine the crack propagation direction as a function of a mode mixity measure.     

Towards an Environmentally Acceptable Heterogeneous Catalytic Method of Producing Adipic Acid by the Oxidation of Hydrocarbons in Air

A survey is given of the catalytic methods potentially available for the production of adipic acid by the oxidation of readily available hydrocarbon precursors under environmentally benign conditions. Encouraging results are reported using H₂O₂ as oxidant and microporous FeAlPO-5 as catalyst at moderate temperatures.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Pricing strategies with reference effects in competitive industries

This paper examines the effect of reference prices on companies operating within competitive industries. We confirm that even with competition, firms optimally price high in the short term to generate a high reference price and then decrease this price over time. Competitors' prices converge toward each other over time, emphasizing the short‐term nature of reference prices. We then show that pricing optimally to take advantage of reference prices generates a positive externality for other firms in an industry, such that competitors may generate higher profit. The longer the focus of a given firm, the more profit the firm generates, but less relative to its competitors. This arises because the externalities created through pricing high to increase reference prices outweigh the benefits of the higher reference prices themselves. If pricing managers are compensated relative to their competition, this suggests that short‐termism may be implicitly encouraged to the detriment of profit.