Chemische Methoden der Abwasser-Aufbereitung

Chemical methods of waste-water treatment. Chemical methods of waste management by oxidation can be considered for particular effluents whose constituents are degraded too slowly in conventional sewage treatment plants or which interfere with the biodegradation of other substances. Of these methods, those we have to choose from today are, in order of increasing operating temperature: oxidation with hydrogen peroxide – wet oxidation at high pressure – evaporation and combustion. None of these methods is fundamentally better than the others, i.e. none has a maximum ecological benefit coinciding with a minimum economic impact. Detailed experimental work is required to establish the limits and possibilities in each case and thus to form a basis for useful comparisons. Thermal processes are normally ruled out for low concentrations of degradable constituents in waste water because the specific energy costs per unit volume are too high; this is where hydrogen peroxide may offer advantages, especially when the proportion of these constituents fluctuates. With higher concentrations, wet oxidation can be employed; evaporation and combustion are suitable if there is also a high concentration of inorganic salts.     

Das spezifische Brechungsinkrement eines statistischen Methylmethacrylat/Benzylacrylat/Styrol-Terpolymeren

The specific refractive index increments of a random methylmethacrylate/ benzylacrylate/styrene-terpolymer and of the three corresponding homopolymers was measured in several solvents and at six different wavelengths. With the known terpolymer composition and the specific refractive index increments of the homopolymers the specific refractive index increment of the terpolymer is calculated by means of an equation formerly derived. Calculated and experimental values are compared.     

Structure–property relationships of poly(urethane urea)s with ultra‐low monol content poly(propylene glycol) soft segments. I. Influence of soft segment molecular weight and hard segment content

Structure–property relationships in poly(urethane urea)s synthesized with ultra‐low monol content poly(propylene glycol) soft segments were investigated as soft segment molecular weight (2000, 4000, and 8000 g/mol) and hard segment content (6.3 and 9.0 wt %) were varied. Morphological features such as interdomain spacing and interphase thickness were quantified and revealed with small‐angle X‐ray scattering (SAXS) and atomic force microscopy (AFM). The thermal and mechanical behavior was assessed with a dynamic mechanical analyzer (DMA) and by differential scanning calorimetry (DSC) and stress‐strain tests. Hard segment content, over the limited range studied, had little effect on the morphology and soft segment thermal and mechanical properties. The molecular weight of the soft segments had considerably more influence on the morphology and mechanical properties. Increasing soft segment molecular weight resulted in greater interdomain spacings, as shown by SAXS, and a noticeable change in the structure, as shown by AFM. Additionally, as soft segment molecular weight decreased the soft segment glass transition broadened and rose to higher temperatures. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 229–243, 2002; DOI 10.1002/app.10168     

Combination of computational prescreening and experimental library construction can accelerate enzyme optimization by directed evolution

Chiral compounds can be produced efficiently by using biocatalysts. However, wild-type enzymes often do not meet the requirements of a production process, making optimization by rational design or directed evolution necessary. Here, we studied the lipase-catalyzed hydrolysis of the model substrate 1-(2-naphthyl)ethyl acetate both theoretically and experimentally. We found that a computational equivalent of alanine scanning mutagenesis based on QM/MM methodology can be applied to identify amino acid positions important for the activity of the enzyme. The theoretical results are consistent with concomitant experimental work using complete saturation mutagenesis and high-throughput screening of the target biocatalyst, a lipase from Bacillus subtilis. Both QM/MM-based calculations and molecular biology experiments identify histidine 76 as a residue that strongly affects the catalytic activity. The experiments demonstrate its important influence on enantioselectivity.     

SOLUBILITY OF CO2 AND H2S IN A HINDERED AMINE SOLUTION

The solubility of H₂S and CO₂ in aqueous solutions of the sterically hindered amine, 2-amino-2-methyl-1-propanol (AMP), was determined at 40 and 100°C. Partial pressures of C)₂ ranged from approximately 2 to 6000 kPa and of H₂S from 2 to 2200 kPa. The solubility results were compared with previously reported acid gas solubilities in aqueous monoethanolamine (MEA) solutions.     

The Thermodynamic Properties of Silicon Oxynitride

A critical assessment of thermal and equilibrium data for silicon oxynitride (Si₂N₂O) is presented. Selected values for the heat of formation of Si₂N₂O from the elements and the absolute entropy of Si₂N₂O at 298.15 K are ΔH⁰_f,298=−947.7 ± 5.4 kJ/mol and S⁰₂₉₈= 45.35 ± 0.4 J/mol·K, respectively. A table of thermodynamic functions for Si₂N₂Ofrom 298 to 2500 K, which has been calculated from the analysis of the literature data, is also presented.     

Analytical Determination of the Distribution of Polishing Time over the Surface of Polished Tiles

Several kinds of glossiness pattern can be seen on the surface of porcelain stoneware tiles right after the polishing process, as a function of the kinematics performed by the polishing heads. For the newest generation of industrial polishing trains, where a transverse oscillation is included, there is still a great need for literature about the resulting patterns. This paper intends to find the spatial distribution of time under polishing analytically using the kinematics equations involved in the polishing process. The measured values of glossiness collected from three polished tiles are also presented. The importance of adopting a good kinematics for the polishing process has been highlighted, and the equations developed herein are useful tools for further attempts at optimizing the polishing process.     

Undecidability of accordance for open systems with unbounded message queues

We study asynchronously communicating open systems modeled as Petri nets with an interface. An accordance preorder describes when one open system can be safely replaced by another open system without affecting some behavioral property of the overall system. Although accordance is decidable for several behavioral properties if we assume a previously known bound on the maximal number of pending messages, we show that it is not decidable without this assumption.     

15 years of processing and dissemination of SPOT-VEGETATION products

Throughout the VEGETATION programme, the Flemish Institute for Technological Research (VITO) uninterruptedly hosted the prime user segment of both VEGETATION 1 and VEGETATION 2 multispectral instruments on board the Satellite Pour l’Observation de la Terre 4 (SPOT 4) and SPOT 5 satellites. Operational since the launch of SPOT 4 in March 1998, and foreseen to continue at least until the end of the SPOT 5 mission (anticipated in spring 2014), this user segment comprises a processing facility (PF), actively receiving, processing, correcting, archiving, and distributing the VEGETATION data and derived added-value products. First and foremost, the VEGETATION programme has been serving the needs of operational users – both institutional and commercial – requesting data in near-real time. However, scientific and educational users too benefited significantly, in particular from VEGETATION’s unique time series of the Earth’s land cover, and more specifically the vegetation cover. Over the years, the centralized archive houses processed data covering the equivalent of 11,000 times the Earth’s surface, and delivered more than 50 terapixels to around 10.000 users. As such, VEGETATION’s mission is a prime example of what Europe wants to achieve through the Global Monitoring for Environment and Security (GMES) initiative: truly operational services providing reliable and up-to-date information.

This article describes the processing facility, the way the data and products are archived, the different dissemination channels as well as the data policy adopted and the users served. One of the recent evolutions, the development of an entirely new product distribution facility (PDF), implemented as part of the Project for On-Board Autonomy – Vegetation (PROBA-V) user segment is discussed.     

Flow Regime Maps for Flow of Liquid Through Downcomer in a Turbulent Bed Contactor

The provision of a downcomer to classical turbulent bed Contactor (TBC) increases the gas treating capacity of the equipment. When the downcomer is provided, it is expected that all the liquid passes through the downcomer only without any liquid flow through the distributor. In the present study, the operational regime for the flow of liquid only through the downcomer is experimentally evaluated for various geometric parameters and particle characteristics. It is observed that the preferred operational regime without dumping and weeping increases with an increase in Archimedes number and downcomer diameter, and decreases with an increase in static bed height and downcomer weir height. Correlations are proposed to satisfactorily predict experimentally observed operational regime.