Practical considerations for high spatial and temporal resolution dynamic transmission electron microscopy

Although recent years have seen significant advances in the spatial resolution possible in the transmission electron microscope (TEM), the temporal resolution of most microscopes is limited to video rate at best. This lack of temporal resolution means that our understanding of dynamic processes in materials is extremely limited. High temporal resolution in the TEM can be achieved, however, by replacing the normal thermionic or field emission source with a photoemission source. In this case the temporal resolution is limited only by the ability to create a short pulse of photoexcited electrons in the source, and this can be as short as a few femtoseconds. The operation of the photo-emission source and the control of the subsequent pulse of electrons (containing as many as 5 x 10(7) electrons) create significant challenges for a standard microscope column that is designed to operate with a single electron in the column at any one time. In this paper, the generation and control of electron pulses in the TEM to obtain a temporal resolution <10(-6)s will be described and the effect of the pulse duration and current density on the spatial resolution of the instrument will be examined. The potential of these levels of temporal and spatial resolution for the study of dynamic materials processes will also be discussed.     

A quantitative analysis of microtubule elongation

Methods have been developed for differentially inhibiting microtubule nucleation and elongation in vitro. By use of polyanions, assembly-competent tubulin solutions of several milligrams/milliliter can be prepared which do not exhibit appreciable spontaneous assembly during the time-course of an experiment. Microtubule elongation can be initiated by the addition of known numbers of microtubule fragments. A detailed analysis of the resulting process demonstrates that: (a) rings are not obligatory intermediates in the nucleation sequence, and neither rings nor protofilament sheets are obligatory intermediates in the elongation reaction. (b) The end of an elongating microtubule often has a short region of open protofilament sheet or "C-microtubule" similar to that observed in vivo. (c) The development of turbidity follows a simple exponential approach to an equilibrium value. (d) The final equilibrium values are independent of the number of added nucleating fragments, while the initial growth rates and half-times to reach equilibrium are dependent on the number of added nuclei. (e) The final lengths of the microtubules at equilibrium are inversely proportional to the number of added fragments. (f) The equilibrium constants are independent of microtubule length. (g) The number of assembly and disassembly sites per microtubule is not a function of microtubule length. (h) The forward rate constants, the final polymer concentrations, and growth rates of microtubules are dependent upon the concentration of polyanion present. These results are strongly supportive of the idea that microtubule assembly is a "condensation-polymerization" and provide basic information on the kinetics and length distributions of the elongation in vitro.     

Brain-computer interfaces for 1-D and 2-D cursor control: designs using volitional control of the EEG spectrum or steady-state visual evoked potentials.

We have developed and tested two electroencephalogram (EEG)-based brain-computer interfaces (BCI) for users to control a cursor on a computer display. Our system uses an adaptive algorithm, based on kernel partial least squares classification (KPLS), to associate patterns in multichannel EEG frequency spectra with cursor controls. Our first BCI, Target Practice, is a system for one-dimensional device control, in which participants use biofeedback to learn voluntary control of their EEG spectra. Target Practice uses a KPLS classifier to map power spectra of 62-electrode EEG signals to rightward or leftward position of a moving cursor on a computer display. Three subjects learned to control motion of a cursor on a video display in multiple blocks of 60 trials over periods of up to six weeks. The best subject's average skill in correct selection of the cursor direction grew from 58% to 88% after 13 training sessions. Target Practice also implements online control of two artifact sources: 1) removal of ocular artifact by linear subtraction of wavelet-smoothed vertical and horizontal electrooculograms (EOG) signals, 2) control of muscle artifact by inhibition of BCI training during periods of relatively high power in the 40-64 Hz band. The second BCI, Think Pointer, is a system for two-dimensional cursor control. Steady-state visual evoked potentials (SSVEP) are triggered by four flickering checkerboard stimuli located in narrow strips at each edge of the display. The user attends to one of the four beacons to initiate motion in the desired direction. The SSVEP signals are recorded from 12 electrodes located over the occipital region. A KPLS classifier is individually calibrated to map multichannel frequency bands of the SSVEP signals to right-left or up-down motion of a cursor on a computer display. The display stops moving when the user attends to a central fixation point. As for Target Practice, Think Pointer also implements wavelet-based online removal of ocular artifact; however, in Think Pointer muscle artifact is controlled via adaptive normalization of the SSVEP. Training of the classifier requires about 3 min. We have tested our system in real-time operation in three human subjects. Across subjects and sessions, control accuracy ranged from 80% to 100% correct with lags of 1-5 s for movement initiation and turning. We have also developed a realistic demonstration of our system for control of a moving map display (http://ti.arc.nasa.gov/).     

Condom Use Among High-Risk Adolescents: Testing the Influence of Alcohol Use on the Relationship of Cognitive Correlates of Behavior.

The goal of this study was the exploration of distal effects of alcohol use on condom use. Criminally involved adolescents completed an initial measure of attitudes, beliefs, and prior behavior. Of the 300 who completed the initial measurement, 267 (89%) completed a behavioral assessment 6 months later. Analyses validated a theoretical model of condom use intentions and indicated that intentions and attitudes measured at baseline were significant predictors of condom use behavior 6 months later. Neither alcohol use nor alcohol problems moderated relationships among model variables or the influence of intentions and attitudes on behavior. The findings do not support a distal role for alcohol use in altering the cognitive correlates of condom use intentions and behavior among high-risk adolescents. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A continuous approach to considering uncertainty in facility design

This paper presents a formulation of the facilities block layout problem which explicitly considers uncertainty in material handling costs on a continuous scale by use of expected values and standard deviations of product forecasts. This formulation is solved using a genetic algorithm meta-heuristic with a flexible bay construct of the departments and total facility area. It is shown that depending on the attitude of the decision-maker towards uncertainty, the optimal design can change significantly. Furthermore, designs can be optimized directly for robustness over a range of uncertainty that is pre-specified by the user. This formulation offers a computationally tractable and intuitively appealing alternative to previous stochastic layout formulations that are based on discrete scenario probabilities.     

Heat transfer coefficients for forced-air cooling and freezing of selected foods

To maximize the efficiency of cooling and freezing operations for foods, it is necessary to optimally design the refrigeration equipment to fit the specific requirements of the particular cooling or freezing application. The design of food refrigeration equipment requires estimation of the cooling and freezing times of foods, as well as the corresponding refrigeration loads. The accuracy of these estimates, in turn, depends upon accurate estimates of the surface heat transfer coefficient for the cooling or freezing operation. This project reviewed heat transfer data for the cooling and/or freezing of foods. A total of 777 cooling curves for 295 food items were obtained from an industrial survey and a unique iterative algorithm, utilizing the concept of ‘equivalent heat transfer dimensionality’, was developed to obtain heat transfer coefficients from these cooling curves. Nine Nusselt–Reynolds–Prandtl correlations were developed from a selection of the 777 heat transfer coefficients resulting from this algorithm, as well as 144 heat transfer coefficients for 13 food items, collected from the literature. The data and correlations resulting from this project will be used by designers of cooling and freezing systems for foods. This information will make possible a more accurate determination of cooling and freezing times and corresponding refrigeration loads. Such information is important in the design and operation of cooling and freezing facilities and will be of immediate usefulness to engineers involved in the design and operation of such systems.