An industry experiment on the effects of test-driven development on external quality and productivity

Existing empirical studies on test-driven development (TDD) report different conclusions about its effects on quality and productivity. Very few of those studies are experiments conducted with software professionals in industry. We aim to analyse the effects of TDD on the external quality of the work done and the productivity of developers in an industrial setting. We conducted an experiment with 24 professionals from three different sites of a software organization. We chose a repeated-measures design, and asked subjects to implement TDD and incremental test last development (ITLD) in two simple tasks and a realistic application close to real-life complexity. To analyse our findings, we applied a repeated-measures general linear model procedure and a linear mixed effects procedure. We did not observe a statistical difference between the quality of the work done by subjects in both treatments. We observed that the subjects are more productive when they implement TDD on a simple task compared to ITLD, but the productivity drops significantly when applying TDD to a complex brownfield task. So, the task complexity significantly obscured the effect of TDD. Further evidence is necessary to conclude whether TDD is better or worse than ITLD in terms of external quality and productivity in an industrial setting. We found that experimental factors such as selection of tasks could dominate the findings in TDD studies.     

Investigation of parameters of an instrument for measuring high-temperature heat fluxes

Results of an experimental investigation of an instrument for measuring high-temperature heat fluxes with a density up to 800 kW/m² are presented.Notation q_inc, Q_inc incident heat flux density - A, , B, , x dimensionless parameters - T_a adiabatic combustion temperature of fuel - H_i instantaneous height of furnace chamber - H full height of furnace chamber - T_f temperature of gases at the furnace outlet - T_f increment in the temperature of gases at the furnace outlet - a_f emissivity of furnace - T_f temperature of flame - ₀ Stefan—Boltzmann constant - T temperature on the heat pipe body - Q supplied power - E_rad sensitivity of sensor - D hourly rate of fuel supplied to the boiler furnace - time Academic Scientific Complex A. V. Luikov Institute of Heat and Mass Transfer of the Academy of Sciences of Belarus, Minsk. I. I. Polzunov Central Boiler and Turbine Institute, St. Petersburg. Scientific and Technical Center Flame-Complex, Ust'-Ilimsk. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 64, No. 3, pp. 324–329, March, 1993     

Clustering of high throughput gene expression data

High throughput biological data need to be processed, analyzed, and interpreted to address problems in life sciences. Bioinformatics, computational biology, and systems biology deal with biological problems using computational methods. Clustering is one of the methods used to gain insight into biological processes, particularly at the genomics level. Clearly, clustering can be used in many areas of biological data analysis. However, this paper presents a review of the current clustering algorithms designed especially for analyzing gene expression data. It is also intended to introduce one of the main problems in bioinformatics – clustering gene expression data – to the operations research community.     

The effect of rock weathering and transition zones on the performance of an EPB-TBM in complex geology near Istanbul,Turkey

Bulletin of Engineering Geology and the Environment - The new Istanbul Airport is being constructed over an old coal field area, 35 km away from the city center. The construction of a rail link...     

Latent heat energy storage characteristics of building composites of bentonite clay and pumice sand with different organic PCMs

In the present work, six new kinds of building composite PCMs (BCPCMs), PS/octadecane, BC/octadecane, PS/CA–MA, BC/CA–MA, PS/PEG1000, and BC/PEG1000 composites, were prepared by using vacuum impregnation method. The maximum percent of PCM in the composites was assigned to be 12, 13, 18, 23, 30, and 42 wt%, respectively. The form‐stable BCPCMs were characterized using SEM, FT‐IR, DSC, and TG analysis techniques. The characterization results showed the existence of homogenous dispersion of the PCM into the PBM matrixes. The DSC measurements indicated that the melting temperatures of the form‐stable BCPCMs are in the range of 20–33°C while they have latent heats of melting in the range of about 28–55 J/g. These results make them promising BCPCMs for low temperature‐passive TES applications in buildings. Thermal cycling test indicated that the prepared BCPCMs have good thermal reliability and chemical stability. TG analysis proved that the prepared BCPCMs have good thermal durability. In addition, the thermal conductivity of BCPCMs was enhanced considerably by addition of expanded graphite (EG). The improvement in thermal conductivity of the BCPCMs caused appreciably reduction in their melting times. Copyright © 2014 John Wiley & Sons, Ltd.     

Mechanical properties and repair bond strength of polymer-based CAD/CAM restorative materials

Information on the mechanical properties and repairability of computer-aided design/computer-aided manufacturing (CAD/CAM) blocks is scarce. Five CAD/CAM blocks with similar indications were evaluated, including four resin nanoceramics, one polymer-infiltrated ceramic network (PICN), and one feldspathic ceramic. CAD/CAM blocks were sectioned into 4 mm × 1.2 mm × 13 mm bars for flexural strength (FS), and 4 mm thick blocks were prepared for elastic modulus (EM), nanohardness (NH), and microshear bond strength (µSBS) testing. FS of the CAD/CAM blocks was determined using a three-point bending test, whereas EM and NH values were measured using a nanoindenter. The reparability of the tested block materials was determined by the µSBS test. One-way ANOVA was conducted for FS, EM, NH, and µSBS followed by Tukey's pairwise comparison (α < 0.05). FS ranged from 115 to 207 MPa, EM from 8.21 to 44 GPa, NH from 0.76 to 7.24, and µSBS from 24.9 to 30.6 MPa. The findings of the present study revealed that resin nanoceramic blocks exhibited higher FS values than PICN and feldspathic ceramic, and they have acceptable mechanical properties for the fabrication of single-unit restorations according to the ISO 6872:2008. Furthermore, all CAD/CAM blocks tested can be successfully repaired regarding their recommended repair protocol.     

The Water-Soluble Peripheral Substituted Phthalocyanines as Corrosion Inhibitors for Copper in 0.1 N HCl: Gravimetric,Electrochemical, SEM-EDS,and Quantum Chemical Calculations

Protection of Metals and Physical Chemistry of Surfaces - Corrosion inhibition effects of water-soluble peripheral substituted cobalt, copper and zinc metallophthalocyanines (CoPc (1), CuPc (2) and...     

Towards occupant-centric simulation-aided building design: a case study

ABSTRACT

This paper aims at illustrating the importance of occupant modelling for decision-making during the building design process. It identifies the energy implications of conventional ways of modelling occupants for the design of office buildings. Furthermore, it presents a step towards bridging the gap between the research efforts and conventional practices within the field of building performance simulation (BPS) aided design. The paper first describes occupant-related assumptions that were made during the design process of a case study office building, obtained via stakeholder interviews. Then, the impact of these assumptions on the design decisions is examined through a simulation-based investigation. The stakeholder interviews revealed that professionals from each design discipline made significantly different assumptions about occupants. The simulation results showed that assumptions about occupants and their behaviour impacted predicted energy savings of some design decisions by a factor of five or more.