Continuously extruded micro‐textured polypropylene films

The continuous extrusion of micro‐textured isotactic polypropylene (i‐PP) film and its tribological properties are reported. As analyzed by scanning electron microscopy, a rectangular‐semicircular micro‐patterned die successfully produced extruded cast‐films with hill‐like micro‐texture. Such films displayed static and kinetic coefficients of friction (COF_s and COF_k) values of 0.247 ± 0.028 and 0.245 ± 0.003, respectively, for a steel fixture sliding along the micro‐texture of the film. The equivalent COF_s and COF_k values for non‐textured (NT) films were 0.369 ± 0.036 and 0.340 ± 0.024, respectively, confirming that textured films displayed a reduction in COF of about 30%. For textured and NT films sliding on textured films, the COF_k values were even lower at 0.161 ± 0.013 and 0.113 ± 0.004, which represents about 20–40% reduction as compared with that for the NT‐NT counterparts. Films coated with a silicone lubricant displayed COF_s and COF_k values of 0.334 ± 0.042 and 0.099 ± 0.012, respectively, for NT films sliding over lubricated NT films, and 0.426 ± 0.031 and 0.063 ± 0.006, respectively, for textured films sliding over lubricated textured films. The COF_k values for textured/non‐lubricated films approach those of NT/lubricated films, indicating that micro‐textured polypropylene films may be used in environmentally sensitive applications where lubricants and fluorinated additives may not be used for reducing friction. POLYM. ENG. SCI., 54:2147–2154, 2014. © 2013 Society of Plastics Engineers     

GC/MS characterization of effluents front the ozone bleaching of eucalypt kraft pulps

Concerns regarding the possible environmental effects of organochlorine by‐products from bleaching of pulp with chlorine‐based compounds have led to the pulp and paper industry developing new bleaching sequences. Ozone, oxygen and hydrogen peroxide are the main reagents in these Totally Chlorine Free (TCF) bleaching processes.

In this study, eucalypt kraft pulps from a variety of Australian wood sources were subjected to bleaching sequences comprising oxygen, ozone and hydrogen peroxide/alkali extraction stages. The aqueous liquid effluents from each stage were analyzed by GC/MS for aldehydes, ketones, alcohols, carboxylic acids and other by‐products. Pentafluorobenzyl oxime derivatives of the aldehydes and ketones were analyzed by electron impact GC/MS. The major carbonyl compounds detected were formaldehyde, glyoxal, dimethylglyoxal and acetone. An homologous series of n‐aldehydes corresponding to cleavage of ω‐3, 6, 9 and 12 unsaturated fatty acids also was detected. Aromatic aldehydes were identified in the oxygen stage and high consistency ozone stages, but not in any medium consistency ozone or post‐ozone bleach stages. In all stages a series of saturated alkyl carboxylic acids from formic to octacosanoic acid was detected. Formic and acetic acids were present in the highest yield. Only trace quantities of unsaturated fatty acids were detected. Details of these and other compounds detected are discussed.     

Influence of Phenological Stage on Swainsonine and Endophyte Concentrations in Oxytropis sericea

Locoweeds are defined as Astragalus and Oxytropis species that cause intoxication due to the alkaloid swainsonine. Swainsonine concentrations in Oxytropis sericea were influenced by location, plant part, and the developmental stage of the plant. Concentrations followed similar trends at each location, generally increasing over the growing season in above-ground parts until the plant reaches maturity with no change in concentration in the crowns. At the onset of senescence, swainsonine decreased in floral parts to less than half of the peak concentration. Similar to swainsonine concentrations, endophyte amounts were influenced by location, plant part, and the developmental stage of the plant. Likewise, endophyte amounts generally increased over the growing season in above ground parts and remained static in the crowns at all four locations. Swainsonine in Oxytropis sericea was positively associated with the endophyte Undifilum, which is responsible for swainsonine biosynthesis.     

Rheology, phase morphology, mechanical, impact and thermal properties of polypropylene/metallocene catalysed ethylene 1-octene copolymer blends

Blends of a polypropylene (PP) and a metallocene catalysed ethylene-octene copolymer (EOC) were prepared using a single screw extruder fitted with a barrier screw design. The EOC used had 25 wt% 1-octene content and the weight fraction of EOC in the blends covered the range 1-30 wt.% Viscosity values for the blends determined experimentally from dual capillary rheological studies were similar to those calculated theoretically using the log additivity principle described by Ferry. This result together with scanning electron microscopy (SEM) observations and evidence from tan δ curves from dynamic mechanical thermal analysis showed PP and EOC to be partially miscible for blends having 10 wt% EOC or less. The tensile modulus, break strength and flexural modulus of the blends decreased with respect to virgin PP as the weight fraction of EOC was increased to 30 wt.% The diminution in mechanical properties was concomitant with an initial increase in elongation at break from 40% for neat PP to 140% for the blend with 15 wt% EOC before decreasing to 65% when 30 wt% EOC was blended. The optimum impact modification of the PP used in this study, in the temperature range −40 to 23 °C, was achieved by blending with between 20 and 30 wt% EOC.     

Gender and dietary fat affect α-tocopherol status in F344/N rats

For four weeks, groups of eight male and eight female F344/N rats were fed diets containing 15.5, 20, 30 or 40% of energy (en%) as fat. The fat was composed of corn oil and beef tallow with 9 en% from linoleate in all diets. Females had greater mean hepatic α-tocopherol levels, whereas males had greater plasma α-tocopherol and cholesterol concentrations. In males, the plasma ratio of α-tocopherol/cholesterol was significantly greater than in females (P<0.05). Plasma α-tocopherol increased with increasing en% fat (r=0.51,P<0.001) in both sexes, but dietary fat did not alter hepatic α-tocopherol levels. These results suggest that plasma α-tocopherol may serve as a biomarker of total dietary fat intake and that in F344/N rats gender differences affect α-tocopherol and cholesterol status.     

Dynamic mechanical thermal analysis of thermally stable and thermally reactive network polymers

The temperature and frequency dependence of the dynamic mechanical properties in the glass transition was studied for a series of partially cured thermally reactive networks (low temperature cured epoxy and a dimethacrylate photocured with a conventional initiator) and more thermally stable networks (high temperature cured epoxy and two dimethacrylates photocured with a photoiniter1). The viscoelastic behavior in the transition region of the former networks changed during the experiment due to additional cure, whereas the thermally stable networks enabled the study of the effect of conversion on the transition region. The glass transition temperatures showed 1 : 1 relationships with the isothermal curing temperatures and were correlated with the degree of conversion. The breadth of the glass transition, as determined from the real and loss moduli, tan δ, and the loss compliance in the temperature and frequency domains, was found to be greater for the dimethacrylate networks than for the epoxy networks. The breadth of the transition for the dimethacrylates was not significantly dependent on the degree of cure. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1348–1359, 2004     

Chemical Synthesis of A Pore‐Forming Antimicrobial Protein,Caenopore‐5, by Using Native Chemical Ligation at a Glu‐Cys Site

The 2014 report from the World Health Organization (WHO) on antimicrobial resistance revealed an alarming rise in antibiotic resistance all around the world. Unlike classical antibiotics, with the exception of a few species, no acquired resistance towards antimicrobial peptides (AMPs) has been reported. Therefore, AMPs represent leads for the development of novel antibiotics. Caenopore‐5 is constitutively expressed in the intestine of the nematode Caenorhabditis elegans and is a pore‐forming AMP. The protein (82 amino acids) was successfully synthesised by using Boc solid‐phase peptide synthesis and native chemical ligation. No γ‐linked by‐product was observed despite the use of a C‐terminal Glu‐thioester. The folding of the synthetic protein was confirmed by ¹H NMR spectroscopy and circular dichroism and compared with data recorded for recombinant caenopore‐5. The permeabilisation activities of the protein and of shortened analogues were evaluated.     

Polarized wave electromagnetic shielding of anisotropic carbon nanomodifier‐based LLDPE composites

The polarized wave electromagnetic shielding (EM SE) of nanocomposites containing 10 vol% of carbon nanomodifiers in a semicrystalline matrix is reported. Heat‐treated carbon nanofibers, Pyrograf^® III PR‐19 heat treatment (HT) and multiwalled carbon nanotubes (MWNT) HT were dispersed in a linear low‐density polyethylene matrix to produce flow‐induced orientation of the nanomodifiers in the spun microfilaments. Consequently, the electrical conductivity of the resulting nanocomposites exhibited anisotropic behavior due to the nanomodifier orientation. The in‐plane conductivity in the longitudinal direction (PR‐19 HT comp.: ～0.02 S/m; MWNT HT comp.: ～3 S/m) was at least an order of magnitude higher than that along the transverse direction. As measured with a rectangular waveguide (WR510, 1.45–2.2 GHz), the PR‐19 HT‐ and MWNT HT‐oriented nanocomposites (1‐mm thick) displayed EM SE values of 0.7 dB and 3.0 dB, respectively, when the nanomodifiers were transversely oriented with the polarized electric field. In contrast, when the orientation of the nanomodifiers was parallel with the field, EM SE values of 3.2 and 9.0 dB were obtained, respectively. The higher EM SE values are consistent with high conductivities observed in the direction of preferred orientation of the modifiers. POLYM. ENG. SCI., 55:299–307, 2015. © 2014 Society of Plastics Engineers     

Fracture mechanics of sharp scratch strength of polycrystalline alumina

The strength of a polycrystalline alumina containing controlled scratches introduced by translated sharp contacts is investigated and described by a multiscale fracture mechanics model. Inert strength measurements of samples containing quasi‐static and translated Vickers indentation contacts showed that scratches degraded the strength at normal contact loads an order of magnitude less than those for quasi‐static indentation. The fracture mechanics model developed to describe strength degradation by scratches over the full range of contact loads included toughening effects by crack‐wake bridging at the microscale and lateral crack‐based residual stress relaxation effects at the mesoscale. A critical element of the model is the nonlinear scaling of the residual stress field of a scratch with the normal contact load acting during scratch formation. The similarities and differences in the scratch model in comparison with prior indentation‐strength fracture mechanics models are highlighted by parallel development of both. Central to the scratch model is the use of easily controlled normal contact load as the scratch‐strength measurement variable. Scratch length and orientation are shown to have significant effects on strength. The distributions of scratch widths controlling the intrinsic strengths of as‐received samples are determined and agreement with the observed scratch dimensions is demonstrated.     

Physicochemical Effects on Lung Disposition of Pharmaceutical Aerosols

The physical control of drug release in the airways (formulation control) and the chemical manipulation of lung disposition and longevity (by prodrug and analogue design) are both discussed as means of providing improved therapeutics for aerosol delivery. Control of drug release by physical entrapment suffers from two major disadvantages: dilution of the active with inert ingredients requires larger total doses to be delivered; and adverse immunologic reactions due to particulate insolubility may be increased by some formulation approaches. Molecular modification, to form prodrugs, analogues, or macromolecular drugs with altered airway affinities and bioavailabilities seems to offer greater promise for future therapeutic aerosols. We should be able to target inhaled drugs, temporally and spatially, by careful control of molecular characteristics.