Analysis of a Parasitic‐Diode‐Triggered Electrostatic Discharge Protection Circuit for 12 V Applications

In this paper, an electrostatic discharge (ESD) protection circuit is designed for use as a 12 V power clamp by using a parasitic‐diode‐triggered silicon controlled rectifier. The breakdown voltage and trigger voltage (V_t) of the proposed ESD protection circuit are improved by varying the length between the n‐well and the p‐well, and by adding n+/p+ floating regions. Moreover, the holding voltage (V_h) is improved by using segmented technology. The proposed circuit was fabricated using a 0.18‐μm bipolar‐CMOS‐DMOS process with a width of 100 μm. The electrical characteristics and robustness of the proposed ESD circuit were analyzed using transmission line pulse measurements and an ESD pulse generator. The electrical characteristics of the proposed circuit were also analyzed at high temperature (300 K to 500 K) to verify thermal performance. After optimization, the V_t of the proposed circuit increased from 14 V to 27.8 V, and V_h increased from 5.3 V to 13.6 V. The proposed circuit exhibited good robustness characteristics, enduring human‐body‐model surges at 7.4 kV and machine‐model surges at 450 V.     

Low operational voltage and high performance organic field effect memory transistor with solution processed graphene oxide charge storage media

Low voltage organic field effect memory transistors are demonstrated by adapting a hybrid gate dielectric and a solution processed graphene oxide charge trap layer. The hybrid gate dielectric is composed of aluminum oxide (AlO_x) and [8-(11-phenoxy-undecyloxy)-octyl]phosphonic acid (PhO-19-PA) plays an important role of both preventing leakage current from gate electrode and providing an appropriate surface energy to allow for uniform spin-casting of graphene oxide (GO). The hybrid gate dielectric has a breakdown voltage greater than 6 V and capacitance of 0.47 μF/cm². Graphene oxide charge trap layer is spin-cast on top of the hybrid dielectric and has a resulting thickness of approximately 9 nm. The final device structure is Au/Pentacene/PMMA/GO/PhO-19-PA/AlO_x/Al. The memory transistors clearly showed a large hysteresis with a memory window of around 2 V under an applied gate bias from 4 V to −5 V. The stored charge within the graphene oxide charge trap layer was measured to be 2.9 × 10¹² cm⁻². The low voltage memory transistor operated well under constant applied gate voltage and time with varying programming times (pulse duration) and voltage pulses (pulse amplitude). In addition, the drain current (I_ds) after programming and erasing remained in their pristine state after 10⁴ s and are expected to be retained for more than one year.     

A Review of Three‐Dimensional Resistive Switching Cross‐Bar Array Memories from the Integration and Materials Property Points of View

Issues in the circuitry, integration, and material properties of the two‐dimensional (2D) and three‐dimensional (3D) crossbar array (CBA)‐type resistance switching memories are described. Two important quantitative guidelines for the memory integration are provided with respect to the required numbers of signal wires and sneak current paths. The advantage of 3D CBAs over 2D CBAs (i.e., the decrease in effect memory cell size) can be exploited only under certain limited conditions due to the increased area and layout complexity of the periphery circuits. The sneak current problem can be mitigated by the adoption of different voltage application schemes and various selection devices. These have critical correlations, however, and depend on the involved types of resistance switching memory. The problem is quantitatively dealt with using the generalized equation for the overall resistance of the parasitic current paths. Atomic layer deposition is discussed in detail as the most feasible fabrication process of 3D CBAs because it can provide the device with the necessary conformality and atomic‐level accuracy in thickness control. Other subsidiary issues related to the line resistance, maximum available current, and fabrication technologies are also reviewed. Finally, a summary and outlook on various other applications of 3D CBAs are provided.     

Mucoadhesive Phenolic Pectin Hydrogels for Saliva Substitute and Oral Patch

Oral disease is one of the most common conditions worldwide, negatively affecting general health, reducing the quality of life, and often developing into systemic illness. However, the design of therapeutic agents for oral diseases is challenging due to various unique features of the oral cavity, including its wet and dynamic environment and curved shape. Herein, the development of highly biocompatible mucoadhesive functional hydrogels for oral applications is reported, generated by introducing bio-inspired phenolic moieties into a pectin polymer. Pyrogallol-functionalized pectin (Pec-PG) can be crosslinked in situ via autoxidation without chemical agents and readily fabricated as various formulations. Sprayable Pec-PG hydrogel exhibits strong mucoadhesion and outstanding hydration ability ex vivo and in vivo, thus displaying significant potential as a novel saliva substitute for dry mouth. The authors further show that topical application of mucoadhesive Pec-PG patches pre-loaded with corticosteroid significantly promotes the repair of diabetic oral ulcer tissue via prolonged drug release, free radical scavenging, and physical barrier effects. Moreover, similar applications for oral ulcer treatment using a pectin hydrogel modified with catechol (Pec-CA), another phenolic moiety are demonstrated. Together, these findings suggest that mucoadhesive phenolic pectin derivatives can provide highly biocompatible, convenient, and effective hydrogel platforms for treating oral diseases.     

Exposure to ethyl carbamate in alcohol-drinking and nondrinking adults and its reduction by simple charcoal filtration

The risk of exposure to ethyl carbamate from the consumption of kimchi, soy sauce, and alcoholic beverages was assessed in alcohol-drinking and nondrinking adults. An alcohol-drinking adult obtains 5.6–9.2 ng/kg bw/day of ethyl carbamate through the addition of kimchi and soy sauce, while a nondrinking adult receives 3.3–4.0 ng/kg bw/day via kimchi and soy sauce alone. The average excess cancer risk of an alcohol-drinking adult (3.9 × 10^?7) was also twice higher than that of an adult who does not drink (1.9 × 10^?7). We achieved a maximum of 47% and 45% removal of the ethyl carbamate present in diluted spirits and soy sauce, respectively, through a simple charcoal filtration process. This resulted in a reduction of the average daily intakes of ethyl carbamate through diluted spirits and soy sauce from 1.7 and 2.2 ng/kg bw/day to 0.9 and 1.2 ng/kg bw/day, respectively.     

Biomimetic Chitin–Silk Hybrids: An Optically Transparent Structural Platform for Wearable Devices and Advanced Electronics

The cuticles of insects and marine crustaceans are fascinating models for man‐made advanced functional composites. The excellent mechanical properties of these biological structures rest on the exquisite self‐assembly of natural ingredients, such as biominerals, polysaccharides, and proteins. Among them, the two commonly found building blocks in the model biocomposites are chitin nanofibers and silk‐like proteins with β‐sheet structure. Despite being wholly organic, the chitinous protein complex plays a key role for the biocomposites by contributing to the overall mechanical robustness and structural integrity. Moreover, the chitinous protein complex alone without biominerals is optically transparent (e.g., dragonfly wings), thereby making it a brilliant model material system for engineering applications where optical transparency is essentially required. Here, inspired by the chitinous protein complex of arthropods cuticles, an optically transparent biomimetic composite that hybridizes chitin nanofibers and silk fibroin (β‐sheet) is introduced, and its potential as a biocompatible structural platform for emerging wearable devices (e.g., smart contact lenses) and advanced displays (e.g., transparent plastic cover window) is demonstrated.     

Anodized Aluminum Oxide/Polydimethylsiloxane Hybrid Mold for Roll‐to‐Roll Nanoimprinting

Two types (hard and soft) of the molds are widely used in nanoimprint lithography for a high throughput over a large area, and high‐resolution parallel patterning. Although hard molds have proven excellent resolutions and can be used at high temperatures, cracks often occur in the mold in addition to the requirement of high imprinting pressure. On the other hand, though soft molds can operate at lower pressures, they give poor pattern resolution. Here, a novel hybrid mold of anodized aluminum oxide (AAO) template attached to a flexible polydimethylsiloxane (PDMS) plate is introduced. Due to the flexible nature of PDMS, various polymer nanostructures are obtained on flat and curved substrates without crack formation on the AAO mold surface. Furthermore, the hybrid mold is successfully used for roll‐to‐roll imprinting for the fabrication of high density array of various shaped polymeric nanostructures over a large area.     

Microfluidic Spinning of Cell‐Responsive Grooved Microfibers

Engineering living tissues that simulate their natural counterparts is a dynamic area of research. Among the various models of biological tissues being developed, fiber‐shaped cellular architectures, which can be used as artificial blood vessels or muscle fibers, have drawn particular attention. However, the fabrication of continuous microfiber substrates for culturing cells is still limited to a restricted number of polymers (e.g., alginate) having easy processability but poor cell–material interaction properties. Moreover, the typical smooth surface of a synthetic fiber does not replicate the micro‐ and nanofeatures observed in vivo, which guide and regulate cell behavior. In this study, a method to fabricate photocrosslinkable cell‐responsive methacrylamide‐modified gelatin (GelMA) fibers with exquisite microstructured surfaces by using a microfluidic device is developed. These hydrogel fibers with microgrooved surfaces efficiently promote cell encapsulation and adhesion. GelMA fibers significantly promote the viability of cells encapsulated in/or grown on the fibers compared with similar grooved alginate fibers used as controls. Importantly, the grooves engraved on the GelMA fibers induce cell alignment. Furthermore, the GelMA fibers exhibit excellent processability and could be wound into various shapes. These microstructured GelMA fibers have great potential as templates for the creation of fiber‐shaped tissues or tissue microstructures.     

Advanced Concentration Gradient Cathode Material with Two‐Slope for High‐Energy and Safe Lithium Batteries

Li[Ni_0.65Co_0.13Mn_0.22]O₂ cathode with two‐sloped full concentration gradient (TSFCG), maximizing the Ni content in the inner part of the particle and the Mn content near the particle surface, is synthesized via a specially designed batch‐type reactor. The cathode delivers a discharge capacity of 200 mAh g^?1 (4.3 V cutoff) with excellent capacity retention of 88% after 1500 cycles in a full‐cell configuration. Overall electrochemical performance of the TSFCG cathode is benchmarked against conventional cathode (CC) with same composition and commercially available Li[Ni_0.8Co_0.15Al_0.05]O₂ (NCA). The TSFCG cathode exhibits the best cycling stability, rate capability, and thermal stability of the three electrodes. Transmission electron microscopy analysis of the cycled TSFCG, CC, and NCA cathodes shows that the TSFCG electrode maintains both its mechanical and structural integrity whereas the NCA electrode nearly pulverizes due to the strain during cycling.     

20% External Quantum Efficiency in Solution‐Processed Blue Thermally Activated Delayed Fluorescent Devices

Highly efficient solution‐processed blue thermally activated delayed fluorescent (TADF) devices are developed by designing soluble blue TADF emitters. The solubility and emission color could be managed by introducing F as an electron withdrawing unit instead of CN. Two soluble blue TADF emitters are synthesized and show a high external quantum efficiency of 20.0% with a color coordinate of (0.16,0.26), and it is the best quantum efficiency reported in solution‐processed TADF devices. The device performances of the solution‐processed blue TADF devices are comparable to those of vacuum‐processed blue TADF devices.