黄金周:数字电视的惊喜和遗憾

本以为数字电视离自己还很远,不料其说来就来了。5.1前,小区内贴出一则通知:“5月6～7日10～17点,本小区进行数字电视转换,届时请居民携带相关证件到小区中心花园领取机顶盒。”     

Cabletron6亿现金无处花——购DEC网络部只是开始

“不仅无外债,还有6亿美元的现金储备;Cabletron要冲破保守,寻找更大发展,购买DEC网络产品部只是一个开始。”12月4日,刚到北京的Cabletron亚太区总裁黎庆生在接受本报记者采访时,这句话给记者留下了深刻的印象。关于11月25日Cabletron收购DEC网络产品部,黎总说,在4.3亿的购买费用中,现金只用了9000万元,Cabletron目前还剩下5亿多现金没有用场。他认为,这次收购对双方来说都是一笔好买卖。对     

LASER CLADDED TiCN COATINGS ON THE SURFACE OF TTTANIUM

Laser cladded coatings of TiCN were produced on the surface of titanium. To obtain the optimal techniques, several conditions were tested by varying the laser scanning rate. The choice of shielding gas was also studied. The cladded coatings were then evaluated from the surface mechanics point of view based on their microhardness. The microstructure of some interesting samples was investigated by optical micrographs （OM）. The results showed that under the condition of fixed pulse frequency and pulse width, the laser scanning rate and the shielding gas are the main factors influencing the components of coatings. TiCN coatings were decompounded and oxidized during the cladding process in the condition of no shielding gas of N2. X-ray diffraction results indicated that the composite coatings composed of TiCN, TiC, Ti2N, and TiO2 were produced using appropriate techniques. The results indicated that the best condition in terms of the surface microhardness is obtained when the scanning rate is 1.5mm/s, the pulse frequency is 15Hz, the pulse width is 3.0ms, and N2 is chosen as the shielding gas. The microhardness of the composite coatings is about 1331kg · mm^-2, which is about 4 times that of the substrate. The optical micrographs indicated that the cladding zone is made up of TiCN, TiO2 and some interdendritic Ti, but the diffusion zone mainly consists of the dendrites phase, and the cladded depth is about 80μm, which is more than 2 times that of the laser nitrided sample. There were no microcracks or air bubbles in the cladded sample, which was cladded using the above optimal techniques.     

用辅以微信息处理机的热分析法检测铸铝合金质量

一种不需进行常规金相检验而用冷却曲线分析的新技术,已被福特公司开发并在生产中用于现场快速监控Essex铝-硅合金熔体。从含有不同原始铝晶粒和共晶硅熔体得到的冷却曲线利用微处理机进行数学分析。这种新技术通过冷却曲线进行微分及随后进行的相变区域积分这两种数学运算,得到监控熔体质量的峰值读数。一旦确立了足够的峰值读数与组织的关系,则可在不取金相试样的情况下预测任何熔体的铸造组织。     

多元羧酸非甲醛DP整理的低磷和无磷催化剂

用1,2,3,4—丁烷四羧酸(BTCA)或柠檬酸(CA)类多元羧酸可使棉织物具有耐久压烫(DP)性。含磷的无机酸钠盐可被用作高温、快速酯化和交联的催化剂。磷酸盐、多磷酸盐、亚磷酸盐和次磷酸盐是已被考虑的四大类催化剂。根据固着的速度和完全度、织物的白度及DP整理后耐碱洗性,这些催化剂中最有效的是次磷酸钠。 但是,作为催化剂,次磷酸钠也有一些缺点。其价格高,在用硫化染料或某些活性染料染色时会产生色调变化,这是众所周知的。色调的变化显然是由于次磷酸钠对较为敏感的偶氮基因和含硫组分的还原作用所致。     

PYRO—JET燃烧器降低NOx排放——发展趋势和实践经验

ＰＹＲＯ—ＪＥＴ燃烧器降低ＮＯ＿ｘ排放—发展趋势和实践经验［德］洪堡公司Ｃ．Ｂａｎｅｒ一、引言何以在１９７０年代末，德国洪堡公司研究的派洛其脱（ＰＹＲＯ—ＪＥＴ）燃烧器转向在回转窑烧煤？所确定的目标在于使窑由燃油在改烧煤时水泥回转窑中产生一个直而短的...     

中度卤水提溴对盐田生态的影响

本文通过对塘沽盐场中度卤水提溴前后卤水的考察，发现了其对卤水中卤虫及Ｃｏｃｃｏｃｈｌｏｒｉｓ藻有一定的影响，并就此提出了笔者对中度卤水提溴后卤水的处理建议。     

对城东变无功补偿装置ZN3-10／1000-300真空开关跳闸回路改造

对城东变无功补偿装置ＺＮ_３──１０／１０００──３００真空开关跳闸回路改造西宁供电局王耀章，牛福山城东变电所１０ｋＶ电容器开关（型号为ＺＮ３－１０／１０００－３００真空断路器）自１９９０年８月投运以来。经常发生断路器接点烧坏问题，通过两年来多次的改?..