FMR and EXAFS modeling of heat-treated Fe-rich and Co-rich TM-M thin films

Ion-beam sputter-deposited alloy films of Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ and Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ were examined for their magnetic and structural properties. Films were characterized by ferromagnetic resonance, vibrating sample magnetometry, and extended X-ray absorption fine structure (EXAFS) analysis. Using atomic parameters deduced from EXAFS modeling and fitting procedures, magnetic properties were calculated with no adjustable parameters. Correlation between perpendicular FMR measurements and EXAFS first-shell modeling suggests a low-temperature formation of cobalt-borides in the Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ alloy. Annealed Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ samples did not display evidence of structural and/or magnetic instabilities until the onset of long-range crystallization near T/sub ann/=400 degrees C.<>     

Study of the nutrient distribution in root tips of the tropical forage Brachiaria

A Brachiaria breeding project is being conducted at CIAT, Colombia to combine acid soil adaptation of B. decumbens with other favourable traits of Brachiaria species that are less adapted to acid soils. Micro-PIXE was applied to investigate nutrient uptake and distribution in root tips of different species grown in hydroponic culture under control and simulated acid soil stress conditions. Different sample measurement approaches were evaluated, including: (1) linear scans with single point measurements along the root axis; (2) mapping of whole root tips; and (3) mapping of root cross sections. Different tissue types could be distinguished on the base of differences in nutrient concentrations and/or Al stress. Al, if supplied under nutrient stress conditions, increased P accumulation in the central vascular tissue of the meristematic and elongation zone of B. decumbens and B. brizantha. Furthermore, a negative correlation was found between Al and Cl accumulation in the root cap of B. decumbens.     

Hypercoagulability and chronic atrial fibrillation: the role of markers of thrombin generation

BACKGROUND: We have studied 64 patients with congestive heart failure, half of them also with chronic nonvalvular atrial fibrillation (AF). Patients were also stratified according to a history of prior stroke. METHODS: The generation of thrombin was investigated by means of the molecular markers prothrombin fragment 1 + 2 (F1 + 2) and thrombin-antithrombin III complex (TAT), because AF patients may have a hypercoagulable state. There was only a trend toward higher values of TAT and F1 + 2 for AF patients, while subjects with previous stroke (irrespective of AF) had increased levels of the markers of thrombin generation (TAT stroke+ 18.95 +/- 5.15 vs TAT stroke- 8.34 +/- 2.41; F1 + 2 stroke+ 2.22 +/- 0.29 vs F1 + 2 stroke- 1.32 +/- 0.12). The presence of spontaneous echo contrast (SEC) within left atrium was also investigated in 32 AF patients by transesophageal echocardiography. RESULTS: TAT were significantly higher in subjects (n = 11) with SEC (TAT sec+ 37.5 +/- 13.41 vs TAT sec- 8.7 +/- 2.51, p = 0.008). CONCLUSIONS: Finally, when we grouped into 1) those with both AF and stroke, 2) AF alone, 3) stroke alone and 4) sinus rhythm without stroke, levels of F1 + 2 were higher (and marginally higher TAT) in patients with AF and stroke than in those without stroke, revealing that there is a true clotting activation state in these subjects.     

Comparison of the effects of nonlinear gain and weak opticalfeedback on the dynamics of semiconductor lasers

The influence of nonlinear gain and optical feedback on the dynamics of single-mode semiconductor lasers are numerically investigated based on the Lang and Kobayashi model. It is well known that the nonlinear gain tends to stabilize the dynamics, while the optical feedback tends to increase the instabilities. In this paper, we study the behavior of the attractors when the feedback level k and the gain saturation coefficient ε vary and show that the effects of these parameters are surprisingly opposite. For example, we find that the route to chaos that the external cavity modes follow for increasing k is reversed for increasing ε in an almost identical manner. When the feedback increases the modes follow the usual quasi-periodic route and turn into torus. If k continues to increase, the torus become chaotic attractors as the result of several period-doubling bifurcations or a third Hopf bifurcation. Further increase of k causes the chaotic attractors to lose stability, Contrarily, if the value of the parameter ε is increased, the attractors recover their stability and reverse the route becoming simple torus again. If ε is increased further, the torus reverse the quasi-periodic route and turn into stable modes again. We also find that on the contrary to k, the parameter ε enhances the stability region of an attractor. We show that the feedback level above which a limit cycle emerges from a stable mode, the feedback level above which a torus emerges from a limit cycle, and the feedback level above which a chaotic attractor loses stability are all increasing functions of ε     

Effect of rotor profiles on the torque of a switched-reluctancemotor

The authors examine effects on the torque that simple variations of the standard rotor pole face profile could have, basically from an elementary viewpoint of how the modified profiles affect the distribution and magnitude of the radial and tangential components of the flux density. It is observed that the average torque is mostly affected by changes that alter the dominant radial component, such as changes in the effective air gap length. The other observation that an increase in the average torque can also be obtained by a favorable shift in the torque versus angle characteristics by relatively simple changes of the rotor pole profile is not so well known. Such a shift that reduces the slope of the torque angle characteristic, skewing the curve towards the unaligned position, has two advantages: one is that the phase inductance is at its maximum positive slop and, hence, the maximum torque, when the phase is energized; second, the flatter inductance profile near the aligned position when the phase current is to be commutated would allow a faster drop off of the commutated current and, thus, a smaller negative torque     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Central sleep apnea

A central sleep apnea is the absence of respiratory effect, and, thus, the absence of airflow during sleep. Central hypopnea, a related disorder, is also discussed. The sensory component of central sleep apnea; defects involving the integrative and executive neurons; non-neurologic causes of central sleep apneas, including chronic obstructive pulmonary disease and congestive heart failure; diagnosis; treatment; and other topics are reviewed in detail.     

A preliminary analysis of the biomass energy production potential in Africa in 2025 considering projected land needs for food production

This paper provides a preliminary examination of present and projected land use in Africa to estimate the potential availability of land in 2025 for use in producing biomass energy. Fifty countries are included in the analysis. Future cropland requirements are projected on the basis of average African cereal crop yield improvements since 1972, and minimum nutritional requirements are assumed to be met in 2025 without increasing imports above present absolute levels. Cropland, natural forests and other wilderness areas are excluded from consideration for biomass energy use. Woody biomass energy yields are estimated on the basis of nationally averaged precipitation, using a yield-precipitation correlation for commercial eucalyptus plantations in Brazil. The total African bioenergy production potential in 2025 is estimated to be about 18 EJ per year for a set of baseline assumptions that includes planting only 10% of the available non-crop, non-forest, non-wilderness area with biomass energy crops. A preliminary cost assessment suggests that much of this biomass could be produced for $1–2 GJ⁻¹. A number of uncertainties in the modelling assumptions are examined through a sensitivity analysis. Despite limitations in the model used here, one robust conclusion is that Africa as a whole has a significant biophysical potential for producing biomass energy. This result suggests that more detailed country and sub-country level assessments would be worthwhile to understand better the practical prospects for future biomass energy production in Africa.