几种血卟啉3,8—烷氧（硫）基衍生物产生单重态氧能力的研究

在“血卟啉衍生物”(HPD)肿瘤光动力疗法取得令人瞩目成就的同时,化学家们证明了临床使用的HPD制剂并非原意义上的血卟啉衍生物,而是一种复杂的卟啉混合物,其中血卟啉(HP),羟乙基-乙烯基-次卟啉(HVD),原卟啉(PP)约占总量的80％,Dougherty等分离得到其余20％未知结构羧基卟啉,认为此为HPD的有效成分,经进一步分析测定其主要成分是二血卟啉醚(DHE)。但最近的工作又表明,全合成得到的DHE与HPD有效成分的化学组成及生物活性亦不相同。显然这类药物组分复杂、结构的不确定限制了肿瘤光动力疗法的进一步发展。近年来,人们正试图从已知结构的化合物中探索新的光敏药物,作者在合成出一系列结构确定的单一组分血卟啉     

碱土金属在萃取剂与树脂间反应平衡常数的测定

研究了碱土金属离子在Ｄ００１树脂与８－羟基喹啉三氯甲烷溶液间的平衡常数Ｏ－ｔＫ的测定。其值依Ｍｇ、Ｃａ、Ｓｒ、Ｂａ次序减小。并得出萃取剂浓度［ＨＡ］。与金属离子在两相分配的关系。     

乳白玻璃条纹解决方案

对乳白玻璃瓶表面产生条纹的原因进行分析,通过耐火材料选用、稳定熔制工艺、工作池中层取料和供料道加搅拌的方法消除条纹缺陷。     

Formation Mechanisms of Platelet Sr3Ti2O7 Crystals Synthesized by the Molten Salt Synthesis Method

The molten salt synthesis (MSS) method is utilized to synthesize the anisotropic platelet Sr₃Ti₂O₇ (S3T2) single-crystal particles. The aim of this study is to identify the essence of platelet Sr₃Ti₂O₇ crystal growth and guide the synthesis of anisotropic platelet SrTiO₃ crystals as well as various technologically important materials. Based on the results of X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy, the formation mechanism of platelet Sr₃Ti₂O₇ crystals conforms to a nucleation–structure rearrangement–dissolution–diffusion in situ epitaxial growth mechanism model. First, SrCO₃ reacts with TiO₂ to form submicrometer SrTiO₃ nuclei. Then, most of the nuclei surrounded by salt ions aggregate and rearrange to form a large SrTiO₃ matrix. The structural rearrangement and the subsequent in situ epitaxial growth processes control the morphology, composition, and size of the final Sr₃Ti₂O₇ crystals. In the synthesis process, the conversion between SrTiO₃ and Sr₃Ti₂O₇ is as follows: and the crystallographic orientation relationship between Sr₃Ti₂O₇ and SrTiO₃ in the interface is (100)_S3T2//{100}_ST, (010)_S3T2//{010}_ST, and (001)_S3T2//{001}_ST.     

现场总线技术在电力自动化中的应用

现场总线(Fieldbus)是当前自动化领域的热门话题，被誉为自动化领域的计算机局域网。信息技术的飞速发展．引起了自动化系统结构的变革，随着工业电网的日益复杂，人们对电网的安全要求也越来越高。现场总线控制技术作为一门新兴的控制技术必将取代过去的控制方式而应用在电力自动化中。     

Fabrication and amplification of Rhodamine B‐doped step‐index polymer optical fiber

A step‐index polymer optical fiber (SI POF) containing Rhodamine B in poly(methyl methacrylate) (PMMA) has been fabricated by a preform technique. Fluorescence of different fiber lengths were observed and discussed. A high gain (23 dB) for a SI POF with 60‐cm length, 400‐μm diameter was obtained. The Rhodamine B content of the doped SI POF is 5 ppm‐wt. The signal wavelength providing the highest gain for a 60 cm SI POF is around 630 nm, and the optimum fiber length is about 60 cm at 10 kW launched pump power. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 681–685, 2004     

改性活性炭的表面特性及其对苯酚的吸附性能

研究了表面改性对活性炭吸附苯酚性能的影响。研究发现,硫酸氧化可增加活性炭表面酸性基团的含量,提高了活性炭的表面亲水性,降低pHPZC值,因而对吸附水中的苯酚的性能产生明显影响,降低了对苯酚的吸附。     

Fenton氧化法处理废水的机理及应用

阐述了Fenton试剂的氧化机理 ,分析了各项因素对氧化效果的影响。介绍了光 -Fenton法、电 -Fenton法及Fenton -混凝法在废水处理中应用情况以及存在的问题 ,并展望了其发展趋势。     

南阳直馏柴油碱洗乳化的原因及对策

分析了南阳石蜡精细化工厂直馏柴油碱洗乳化的原因，介绍了该厂直馏柴油碱洗抗乳化措施，这些措施包括：优化操作参数，加强生产管理，深度碱洗柴油轻组分然后轻、重组分混合出厂。这些措施的综合应用彻底解决了南阳石蜡精细化工厂直馏柴油碱洗乳化的问题，又保证了柴油收率。     

Seeded Crystallization of Leucite

The leucite crystallization kinetics from a hydrothermally derived precursor seeded with nano-crystalline leucite was investigated by X-ray diffraction and non-isothermal differential thermal analysis. The nano-crystalline leucite was prepared by high-energy milling of high-purity leucite powder and the leucite precursor was prepared by the hydrothermal method of silica sol, aluminum nitrate, and potassium nitrate. After the seeds were introduced, the crystallization temperature of the precursor was lowered by 100°C and the transition phase kalsilite did not appear during the crystallization process. When the seeded precursor was heat treated at 700°C, a small amount of cubic leucite was stabilized to room temperature. The seeded precursor showed an exothermic peak between 800° and 920°C under different heating rates. The activation energy for the growth of leucite from the seeded precursor was 256(SD9) kJ/mol.