TN-S系统接地方式中重复接地的探讨

通过对TN S系统接地方式中重复接地的探讨 ,介绍了重复接地对N线和PE线的不同作用 ,明确了TN S系统接地方式中重复接地的设计和施工方法。     

就拉杆固定支架谈锻件的缺陷分析

针对汽车锻件拉杆固定支架在生产过程中产生的裂纹、折叠、表面脱碳等多种形式缺陷,从锻件生产工艺过程的各工序来分析其可能产生的缺陷,并重点就裂纹、折叠、表面脱碳等缺陷产生的原因及其解决方法进行探讨,从而进一步完善生产工艺,改善锻件质量.     

Network traffic prediction based on a new time series model

Fast and accurate methods for predicting traffic properties and trend are essential for dynamic network resource management and congestion control. With the aim of performing online and feasible prediction of network traffic, this paper proposes a novel time series model, named adaptive autoregressive (AAR). This model is built upon an adaptive memory‐shortening technique and an adaptive‐order selection method originally developed by this study. Compared to the conventional one‐step ahead prediction using traditional Box–Jenkins time series models (e.g. AR, MA, ARMA, ARIMA and ARFIMA), performance results obtained from actual Internet traffic traces have demonstrated that the proposed AAR model is able to support online prediction of dynamic network traffic with reasonable accuracy and relatively low computation complexity. Copyright © 2005 John Wiley & Sons, Ltd.     

Mobility Influences on the Capacity of Wireless Cellular Networks

Capacity has always been a major concern in wireless networks. This letter studies the impact of mobility on the overall system capacity in wireless cellular networks. In this letter, we present a simple system model which we developed to capture the inherent relationships among system capacity, new call blocking probability, handoff dropping probability, call terminating probability, and bandwidth utilization rate. We investigate the complex relationship between mobility and capacity‐related parameters. Through simulation, we demonstrate that mobility has a significant impact on capacity and is reversely proportional to the bandwidth reserved for handoff traffic.     

On the relationship between squared pairings and plain pairings

In this paper, we investigate the relationship between the squared Weil/Tate pairing and the plain Weil/Tate pairing. Along these lines, we first show that the squared pairing for an arbitrary chosen point can be transformed into the plain pairing for a trace zero point which has a special form to compute them more efficiently. Then the optimizations made for computing squared pairings are combined with the computation of pairings on these trace zero points, to achieve even better performance for the computation of the 4th powered Weil pairing.     

水磨沟倒虹吸管工程设计

水磨沟倒虹吸管是甘肃省引大入秦灌溉工程总干渠上的大型跨沟建筑物，为双管桥式倒虹吸，具有工作水头高，输水流量大，管线长，管径大的特点，其综合工程规模位居国前列，6年的运行实践证明，工程设计合理，运行可靠。其工程设计的成功经验对类似工程具有参考价值。     

GCr15轴承钢的热变形模拟试验研究

利用先进的Gleeble-2000热模拟试验机，对GCr15轴承钢某一轧制过程进行模拟试验，测定出GCr15轴承钢动态CCT曲线，并结合微观组织分析，制定合理的GCr15轴承钢轧后控制冷却工艺，以期达到提高GCr15轴承钢质量的最终目的。     

医院空调设计的几点体会

空调系统应用于普通房间可能引起空调病 ,应用于医院时此问题将更为突出 ,本文对此类建筑在空调系统设计中应重视的有关问题进行了初步探讨     

通用雷达故障诊断专家系统的设计

目的：为了提高雷达装备故障诊断的效率和可靠性。方法：通过对雷达装备综合测试和故障诊断要求和方法的分析。介绍一种适用于雷达装备的故障智能诊断专家模型，探讨了该模型的基本结构和相应的推理机制及故障诊断策略。结果：结论雷达故障诊断的特点，研究了该模型及诊断方法在雷达装备中的具体应用，证实了该方法是有效的。结论：将自动测试技术和专家系统相结合，可以提高故障诊断的效率和可靠性。