An optimized image watermarking algorithm based on SVD and IWT

The Journal of Supercomputing - With the wide spread of image information, it is an urgent problem to protect image property rights and crack down on piracy. Watermarking algorithm is an effective...     

Determination of the acidic properties of carboxylated carbocatalysts in an acid-catalyzed ring-opening reaction using kinetic profiling

The acid-catalyzed ring-opening reaction of styrene oxide was used as a probe reaction for evaluating the acidic properties of carboxylated carbocatalysts. Significant discrepancies in the initial reaction rates were normalized using the total number of carboxyl groups, and demonstrated that the average catalytic activities of the carboxyl moieties on the carbocatalysts differed. Comparisons between the apparent activation energy E _a and the pre-exponential factor A, derived from Arrhenius analysis, demonstrated that A varied more significantly, and therefore had a more significant effect on the reaction rates than E _a. The variation in the calculated pKa values of the carboxyl groups was attributed to the electronic effects of the nitro groups. This hypothesis was supported by the temperature programmed desorption profiles of nitrogen monoxide ions.

Open image in new window

     

数控机床操控器人机界面优化设计研究

目的控制器和显示器共同组成数控机床控制面板的整体界面,是机床接受与执行命令的交互平台。从人机交互角度,聚焦于控制器的界面布局进行优化设计。方法基于人机工程学理论的优化流程,采用现场访谈、现场观察等方法,将人机工程学的理论转化为具体考核指标。结论从人机工程学的研究角度出发,结合工业设计、用户体验设计学等内容,从功能区域分区、操纵器色彩设计等方面优化数控机床控制器的界面,提高系统整体效能及使用者满意度,为数控机床系统开发设计提供参考。     

强磁场对硅锰铸钢于A_1点附近等温珠光体相变的影响

通过开展12 T强磁下硅锰铸钢(50Si_2Mn_3)于A_1点温度附近不同等温时间的热处理试验,并对比强磁场与无磁场条件下等温珠光体相变试验结果,研究了磁场对珠光体转变量及组织形貌的影响。研究表明,对于50Si_2Mn_3在A1点以下较高温度范围内,强磁场可缩短珠光体相变的孕育期,促进硅锰铸钢珠光体转变,使其转变量明显增加;强磁场能够提高珠光体转变临界点,使50Si_2Mn_3在A1点以上等温过程中能够发生珠光体相变。     

Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window

     

MHSACAE-CNN在噪声下的电机轴承故障诊断

电机的运行情况复杂,实际运行工况下会有大量的噪声,导致其轴承故障诊断精度下降。为了改善这一问题,提出了一种基于多头自注意力机制的一维全卷积自编码网络（One-dimensional Fully Convolutional Autoencoding Network Basedon Multi-head Self-attention,MHSACAE）与卷积神经网络（Convolutional Neural Network,CNN）结合的轴承故障诊断方法。该方法先采用MHSACAE网络进行降噪,再通过CNN进行故障诊断。其中MHSACAE去噪网络采用无监督训练的方式,充分考虑了实际工况和序列数据内在联系,在实现对噪声的滤除效果的同时,最大限度地保留下了原始的故障信息,使得CNN可以实现在噪声情况下对电机轴承故障的高精度诊断。通过与其他轴承故障诊断方法在噪声情况下进行对比,证明提出的方法具有更好的效果。     

纳米碳中的微观缺陷结构特征

测定了定向石墨和纳米碳的正电子寿命谱,结果表明,热解法制备的纳米碳存在开空间小于单空位的自由体积以及开宽间相当于约１０个空位聚集体全的微孔洞,比较了热解法制备的纳米碳,ＵＦＰ冷压法制备的纳米Ｆｅ和纳米ＴｉＯ２以有非晶晶化法制备的纳米ＮｉＰ的缺陷结构特征,结果为纳米ＮｉＰ中缺陷的电子密度最高,纳米Ｆｅ和纲米ＴｉＯ２次之,纳米碳的最低,纳米碳中的缺陷浓度最高,纳米Ｆｅ和纳米ＴｉＯ２的次之,纳米ＮｉＰ的     

新测试方式下非计算机专业程序设计课程教学探讨

原有教学法在学生实际编程能力上机考试方面存在局限,为适应新的测试方式所带来的教学方法与教学理念的变化,本文结合本校实际,对如何激发与保持学生的学习积极性、实现抽象与模型化的跨越、培养学生的计算思维能力、合理组织实验教学进行探讨,并对实验过程进行监督与综合评价。     

我国陆地观测卫星现状及发展战略思考

本文回顾总结了我国陆地观测卫星载荷体系、地面系统建设及数据应用等方面的发展现状和成就,分析了当前所面临的挑战和任务,以此为基础,对我国陆地观测卫星的未来发展进行了战略思考和展望,提出了加强国家顶层规划、加强地面系统统筹建设、实现系列化业务化运营、加强国际合作、推进产业化发展等建议.