二氧化硫在钒催化剂上氧化动力学的研究——Ⅲ.几种工业钒催化剂的动力学方程式的比较

<正>作者等过去的工作已经证实,由于扩散过程的影响、温度范围的不同、或化学组成的差异,二氧化硫在钒催化剂上的氧化动力学方程式可能具有不同的形式。反应物及生成物与催化剂之间的相互作用,可能使催化剂具有不同的颜色与活性,因而即使温度相同,由于催化剂在层内所处的部位不同,其催化活性可能并不一致。这些复杂性给工业设计带来了很大的困难。因此,合理的简化是完全必要的。 作者等选取了几种不同的工业钒催化剂,用实验方法求得了适用于它们的动力学方程式,进行比较和讨论,提出了一个简便的、合理的、可以用作设计基础的动力学方程式。     

金属阳极四元涂层开发现状浅析

通过分析金属阳极涂层结构，在现有金属阳极三元涂层的基础上，确定了钌、钛、铱、锡四元涂层。对该涂层的电化性能指标及实际运行数据进行了分析，并与三元涂层电化性能指标进行对比，说明了四元涂层在析氯电位、极化率、析氧电位、寿命等方面均明显优于三元涂层，而且更适合在高电流密度下运行。     

Electrochemical micromachining of nitinol by confined-etchant-layer technique

The confined etchant layer technique has been applied to fabricate complex three-dimensional microstructures on nitinol for the first time. HF and HNO₃ were locally and simultaneously electrogenerated at the mold surface to etch a nitinol workpiece. NaOH was used as an efficient scavenger to confine the etchant close to the mold. Cyclic voltammetry was employed to study the electrochemical behavior of a Pt electrode in the etching solution in order to choose an appropriate potential for etchant generation on the mold. The thickness of the confined etchant layer was estimated to be several micrometers by inspecting the deviation of the sizes of the etched spots from the sizes of those on the microelectrode. Thus, the composition of the electrolyte could be optimized for better etching precision. By optimizing the composition of the electrolyte, complex microstructures on a Pt-Ir mold bearing the logo “XMU” of Xiamen University were successfully fabricated on nitinol. The etched patterns were approximately negative copies of the mold, and the precision of duplication could easily reach the micrometer scale.     

物理防晒剂配方应用

指出了防晒对人体的重要性，并给出了防晒产品提高效能的依据。重点讨论了如何使用TIOVEIL和SPECTRAVEIL分散液来取得最佳的效能，在达到最高的SPF值和UVA防护的同时保证最终产品的稳定和雅致外观。同时还给出了物理防晒产品TIOVEIL和SPECTRAVEIL的配方指导。     

A comparative analysis of evolutionary and memetic algorithms for community detection from signed social networks

To detect communities in signed networks consisting of both positive and negative links, two new evolutionary algorithms (EAs) and two new memetic algorithms (MAs) are proposed and compared. Furthermore, two measures, namely the improved modularity Q and the improved modularity density D-value, are used as the objective functions. The improved measures not only preserve all properties of the original ones, but also have the ability of dealing with negative links. Moreover, D-value can also control the partition to different resolutions. To fully investigate the performance of these four algorithms and the two objective functions, benchmark social networks and various large-scale randomly generated signed networks are used in the experiments. The experimental results not only show the capability and high efficiency of the four algorithms in successfully detecting communities from signed networks, but also indicate that the two MAs outperform the two EAs in terms of the solution quality and the computational cost. Moreover, by tuning the parameter in D-value, the four algorithms have the multi-resolution ability.     

基于LMS算法改进Cupo相位抖动补偿方法

为了增加FIR-ALE(Finite Impulse Response-Adaptive Linear Enhancer)相位噪声补偿系统的补偿能力,本文基于LMS算法对Cupo的FIR-ALE系统进行改进,并对8PSK调制方式下的信号进行了Matlab仿真,通过对信号功率谱、误比特率以及星座图的分析,对比了两种方法.仿真结果表明,改进后的系统对于幅度为5°、频率为120 Hz的相位抖动,能够将抖动衰减25 dB左右;对于幅度为15°、频率为25 Hz的相位抖动,改进后的LMS系统能将抖动衰减35 dB左右.而且,随着相位抖动幅度的增大,改进的LMS方法的补偿能力同Cupo的FIR-ALE方法比较,性能逐渐提高.     

可拓集合论在专家系统知识表示中的应用

引入了可拓集合论来优化专家系统的设计过程,阐述了可拓集合论应用于专家系统的可行性,在分析知识表示的集合与分类特征的基础上,探讨了可拓集合论在知识表示中的应用,结合人工智能技术的发展趋势,对专家系统在可拓学中的应用前景做出了展望.     

基于ZMP的双足机器人稳定性分析

引入双足机器人研究中一个重要物理量——零力矩点ZMP（zero Moment Point）,研究其计算和测量方法,利用其分析双足机器人在单腿和双腿支撑时的作用范围,最后在二维和三维平面内对机器人的ZMP计算进行探讨,为稳定步态的设计做了理论铺垫。