Efficient implementation of the implicit error correction nVoD schema

Implicit Error Correction is a near Video-on-Demand (nVoD) schema that trades bandwidth utilization for initial playback delay while potentially allowing an infinite number of users. Additionally, it provides error protection without further bandwidth increase by exploiting the implicit redundancy of nVoD protocols, using linear combinations of the segments transmitted in a given time slot. This paper introduces a new implementation that outperforms the original schema by adding two new mechanisms: redundancy channels and feedback error correction.     

DATA ANALYSIS PRIOR TO A CIRCULATION MODEL IN GRAN CANARIA

The use of numerical models in physical oceanography, with the aim of reproducing and predicting water movements, is a common practice, especially for coastal areas. Nevertheless, results will be accurate only if the assumptions are appropriate and include all significant characteristics of the domain under modeling. Two-dimensional models are often used for shallow-water areas, but the implicit assumptions of conservation of a characteristic vertical profile for the horizontal velocities all over the domain and negligible vertical circulation must be exhaustively checked. Here a case is presented in which two-dimensionality would have led to inaccurate results, as the analysis of the field data showed a three-layer behavior. This case concerns the eastern coast of Gran Canaria island (Canary Islands) and illustrates how mathematical models will describe the phenomena they try to represent correctly only if all assumptions are right.     

Development of a Real Time PCR system for detection of ochratoxin A-producing strains of the Aspergillus niger aggregate

Members of Aspergillus section Nigri are distributed worldwide, being considered as common food spoilage fungi. Some species of this section produce ochratoxin A (OTA), mainly Aspergillus carbonarius and several members of the Aspergillus niger aggregate. Detection of ochratoxigenic A. niger aggregate strains is important to prevent OTA contamination in foodstuffs. A new Real Time PCR procedure has been developed for the rapid and specific detection and quantification of ochratoxin A-producing strains of the A. niger aggregate. Two specific primers delimiting a 120 bp fragment and a probe were designed and directed to a polyketide synthase (PKS) from A. niger CBS 513.88 genome. This PKS has a strong similarity to PKS of A. ochraceus fragment involved in ochratoxin biosynthesis. Specificity was confirmed by testing primers towards purified DNA from 91 fungal strains, including reference and food isolates. The SYBR-Green and the TaqMan approaches developed allowed the specific detection only of ochratoxigenic strains of the A. niger aggregate. All other analyzed food related fungi gave negative results. This is the first report on a Real Time PCR system for the detection of OTA-producing strains of the A. niger aggregate.     

Microstructure of NiCoAlFeCuCr multi-component systems synthesized by mechanical alloying

The present study uses the mechanical alloying method to produce series of binary to senary alloys based on Ni, Co, Al, Fe, Cu, Cr. Milling times are 0, 10, 20 and 30 h and experiments are performed in a high energy ball mill. The results of this investigation show that an FCC solid solution is formed in all the studied systems, but a different phase formation response is presented in each system. A mixture of FCC and BCC solid solutions in quaternary to senary systems, is formed for short milling times. Apparently, the dissolution rate of Fe and Cr into the FCC solid solution, is low. Moreover, it is observed that additions of these elements promote the formation of BCC solid solution, which is stable at temperatures up to ?1273 K. Finally, it is observed that the heat treated products present a mixture of FCC and BCC solid solutions with lattice parameters close to those found in the milled products.     

Precipitation of low molecular weight phenolic compounds of grape seeds cv. Carménère (<Emphasis Type=Italic>Vitis vinifera</Emphasis> L.) by whole saliva

Low molecular weight phenolic compounds (LMWP) contribute to astringency and bitterness, two important sensory attributes. This work aimed to study the interactions between human saliva and a group of LMWP from a grape seed extract, namely, monomers, dimers and trimers of flavan-3-ol plus gallic acid. LMWP in the sediment that was produced by mixing whole saliva with the grape seed extract were identified by high-performance liquid chromatography analysis (HPLC–DAD). Two assays to produce LMWP-salivary protein sediments were carried out. An indirect assay consisted of in vitro mixing aliquots of saliva with a constant volume of the grape seed extract followed by centrifugation and sediment analysis. In a direct assay, aliquots of the grape seed extract were mixed in-mouth with saliva, returned to a vessel and centrifuged. In each assay, polyphenol composition of the sediments varied according to the tannin/saliva vol/vol ratio although in both cases monomeric LMWP were the most abundant polyphenol components of the sediments. The study also suggested the need for a strict control of the in vitro experimental conditions used to mimic the in vivo conditions in which tannin–protein interactions do occur and produce astringency perception.     

Cost‐Efficient Virtual Optical Network Embedding for Manageable Inter‐Data‐Center Connectivity

Network virtualization opens the door to novel infrastructure services offering connectivity and node manageability. In this letter, we focus on the cost‐efficient embedding of on‐demand virtual optical network requests for interconnecting geographically distributed data centers. We present a mixed integer linear programming formulation that introduces flexibility in the virtual‐physical node mapping to optimize the usage of the underlying physical resources. Illustrative results show that flexibility in the node mapping can reduce the number of add‐drop ports required to serve the offered demands by 40%.     

Light and Strong SiC Networks

The directional freezing of microfiber suspensions is used to assemble highly porous (porosities ranging between 92% and 98%) SiC networks. These networks exhibit a unique hierarchical architecture in which thin layers with honeycomb‐like structure and internal strut length in the order of 1–10 μm in size are aligned with an interlayer spacing ranging between 15 and 50 μm. The resulting structures exhibit strengths (up to 3 MPa) and stiffness (up to 0.3 GPa) that are higher than aerogels of similar density and comparable to other ceramic microlattices fabricated by vapor deposition. Furthermore, this wet processing technique allows the fabrication of large‐size samples that are stable at high temperature, with acoustic impedance that can be manipulated over one order of magnitude (0.03–0.3 MRayl), electrically conductive and with very low thermal conductivity. The approach can be extended to other ceramic materials and opens new opportunities for the fabrication of ultralight structures with unique mechanical and functional properties in practical dimensions.     

CMOS harmonic upconverter with power management of $$2{\bf nd}$$ harmonic for wideband short-range communications

The design and simulation of a 2nd harmonic based upconverter is introduced. With the proposed upconverter, it is possible to reach a good noise figure with power and area reduction. The design of the circuit was made with the UMC \(0.18\,\upmu \hbox {m}\) Mixed Mode/RF CMOS technology. However, the design methodology can be extended to a different CMOS process. According to the performance exhibited by the purposed mixer, it may be useful in wideband short-range communication technologies, such as certified wireless USB.