On arginine-based polyurethane-blends specific to vascular prostheses

Polymer blends based on Tecoflex™ and an experimental aliphatic polyurethane (HMDI-PCL-arginine stands for 4,4 (metylene-biscyclohexyl) isocyanate - poly (ε caprolactone) diol, SPUUR stands for segmented poly(urea)urethanes using amino acid of L-Arginine as chain extender) were obtained by solvent casting, and further studied by fourier transform infrared (FTIR) and Raman spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis, and X-ray diffraction (XRD). Their biological performances were assessed in terms of hemocompatibility and Human umbilical vein endothelial cell (HUVEC) cytotoxicity. Tensile properties of dumbbell specimens were compared to longitudinal and circumferential tensile properties of tubular vascular graft. FTIR showed that as the SPUUR content increased in the blend, absorptions at 2860 cm⁻¹ increased, carbonyl absorptions at 1724 cm⁻¹ broaden and the small peak at 2796 cm⁻¹, typical of Tecoflex™ disappeared. Raman spectroscopy showed that the low intensity carbonyl absorption at 1724 cm⁻¹ also increased with SPUUR content. DSC allowed detection of PCL soft segment melting (T_m = 50°C) in agreement with X-ray reflections at 21.3° and 23.6°, assigned to SPUUR. However, no improvements in thermal stability were detected by TGA by blending. The addition of SPUUR to Tecoflex™ improved hemocompatibility and HUVEC cytotoxicity. The vascular grafts performance showed that 40% SPUUR blends exhibited the highest force in the longitudinal test whereas 50% SPUUR blends showed the highest circumferential force. Pressure burst strength was higher than 1000 mmHg for all blends. Overall, these blends can be used for high caliber vascular grafts.     

Enhanced Oxygen Diffusion Along Internal Oxide–Metal Matrix Interfaces in Ni–Al Alloys During Internal Oxidation

A study of the internal oxidation of dilute Ni–Al alloys in an NiO/Ni Rhines pack was performed at 800, 1000, and 1100°C. Considerable deviations from the classical internal oxidation model have been observed. The rate of internal oxidation depends not only on the concentration of the alloying element but also on its nature, which contributes to determining the size, shape, orientation and distribution of the internal oxide precipitates. For instance, the precipitates in the Ni–Al alloys are continuous rods, arranged in a cone-shaped configuration that extends from the surface to the internal oxide front. The observed depths of internal oxidation for the various concentrations of aluminum are discussed and related to the morphologies of the internal oxide precipitates. The apparent N^(s) _oD_o values determined from internal oxide penetrations increase with increasing solute content in the alloy. It is postulated that diffusivity of oxygen is enhanced along the internal oxide–metal matrix interface compared with that in the metal matrix.     

Biofilm Responses to Flow Regulation by Dams in Mediterranean Rivers

Dams regulate downstream hydrology and modify water quality, which in turn can impinge on the biota, especially in rivers naturally subject to large hydrological variability, such as those under Mediterranean climate. The effect of dams on biofilms was analysed in three tributaries (Cinca, Siurana and Montsant) of the Ebro River (NE Spain). We hypothesized that flow regulation would lead to lower spatial variability of biofilms on the streambed and to a decrease in their metabolic rate per unit biomass, especially during low flow periods. Biofilm characteristics were studied in five transects evenly spaced along river reaches upstream (control) and downstream (impact) of dams in each river, along with riverbed granulometry, hydraulics and water chemistry. Chlorophyll‐a, respiratory activity, photosynthetic capacity and efficiency, and extracellular enzymatic activities (β‐d ‐glucosidase, alkaline phosphatase and leucine‐amino‐peptidase) of epilithic biofilms were measured in different seasons. Spatial variability of chemical and biological variables was reduced downstream of the dams. Chlorophyll‐a concentration, photosynthetic efficiency and respiration capacity were higher in impact than in control reaches, but generally, low inorganic phosphorus concentrations resulted in comparable phosphatase activities downstream and upstream of dams. On the other hand, β‐d ‐glucosidase and leucine‐amino‐peptidase activities were higher at impact reaches. Biofilms were thicker and metabolically more active at the impact reaches, with higher ability to transform dissolved organic matter. Overall, results from this study provide evidence that dams can largely affect the structure and activity of river biofilms, with foreseeable important consequences for river ecosystem functioning. Copyright © 2014 John Wiley & Sons, Ltd.     

A finite volume–finite difference method with a stiff ordinary differential equation solver for advection–diffusion–reaction equation

A model for atmospheric pollutant transport is proposed considering an advection–diffusion–reaction equation. A splitting method is used to decouple the advection, diffusion and reaction parts. A scheme based on finite volume, finite difference and backward differentiation formula is used for solving an atmospheric transport-chemistry problem.     

Global Atmospheric Profiles from Reanalysis Information (GAPRI): a new database for earth surface temperature retrieval

This paper presents the Global Atmospheric Profiles derived from Reanalysis Information (GAPRI) database, which was designed for earth surface temperature retrieval. GAPRI is a comprehensive compilation of selected atmospheric vertical profiles at global scale which can be used for radiative transfer simulation in order to obtain generalized algorithms to estimate land surface temperature (LST). GAPRI includes information on geopotential height, atmospheric pressure, air temperature, and relative humidity derived from the European Centre for Medium-Range Weather Forecasts Re-Analysis data from year 2011. The atmospheric profiles are structured for 29 vertical levels and extracted from a global spatial grid of about 0.75° × 0.75° latitude–longitude with a temporal resolution of 6 hours. The selection method is based in the extraction of clear sky profiles over different atmospheric weather conditions such as tropical, mid-latitude summer, subarctic, and arctic, while also considering sea and land areas and day- and night-time conditions. The GAPRI database was validated by comparing land and sea surface temperature values derived from it to those obtained using other existing atmospheric profile databases and in situ measurements. Moreover, GAPRI was also compared to previous radiosonde atmospheric profiles using simulated split-window algorithms. Results show good agreement between GAPRI and previous atmospheric databases, thus demonstrating the potential of GAPRI for studies related to forward simulations in the thermal infrared range. GAPRI is a freely available database that can be modified according to the user’s needs and local atmospheric conditions.     

Extended Reflexive Ontologies for the Generation of Clinical Recommendations

Decision recommendations are a set of alternative options for clinical decisions (e.g., diagnosis, prognosis, treatment selection, follow-up, and prevention) that are provided to decision makers by knowledge-based Clinical Decision Support Systems (k-CDSS) as aids. We propose to follow a “reasoning over domain” approach for the generation of decision recommendations by gathering and inferring conclusions from production rules. In order to rationalize our approach, we present a specification that will sustain the logic models supported in the knowledge bases we use for persistence. We introduce first the underlying knowledge model and then the necessary extensions that will convey toward the solution of the reported needs. The starting point of our approach is the proposition of Reflexive Ontologies (RO). Here, we go a step further, proposing an extension of RO that includes the handling and reasoning that production rules provide. Our approach speeds up the recommendation generation process.     

A mixed integer programming approach to multi-skilled workforce scheduling

The potential benefits of using human resources efficiently in the service sector constitute an incentive for decision makers in this industry to intelligently manage the work shifts of their employees, especially those dealing directly with customers. In the long term, they should attempt to find the right balance between employing as few labor resources as possible and keeping a high level of service. In the short run (e.g., 1 week), however, contracted staff levels cannot be adjusted, and management efforts thus focus on the efficient assignment of shifts and activities to each employee. This article proposes a mixed integer program model that solves the short-term multi-skilled workforce tour scheduling problem, enabling decision makers to simultaneously design workers’ shifts and days off, assign activities to shifts and assign those to employees so as to maximize and balance coverage of a firm’s demand for on-duty staff across multiple activities. Our model is simple enough to be solved with a commercial MIP solver calibrated by default without recurring to complex methodologies, such as extended reformulations and exact and/or heuristic column generation subroutines. A wide computational testing over 1000 randomly generated instances suggests that the model’s solution times are compatible with daily use and that multi-skilling is a significant source of labor flexibility to improve coverage of labor requirements, in particular when such requirements are negatively correlated and part-time workers are a scarce resource.     

Pose consensus in networks of heterogeneous robots with variable time delays

This paper proposes a novel pose (position and orientation) consensus controller for networks of heterogeneous robots modeled in the operational space. The proposed controller is a distributed proportional plus damping scheme that, with a slight modification, solves both the leader–follower and leaderless consensus problems. A singularity‐free representation, unit quaternion, is used to describe the robots orientation, and the network is represented by an undirected and connected interconnection graph. Furthermore, it is shown that the controller is robust to interconnection variable time delays. Experiments with a network of two 6‐degrees‐of‐freedom robots are presented to illustrate the performance of the proposed scheme. Copyright © 2014 John Wiley & Sons, Ltd.