Gamma radiation aging of EVA/EPDM blends: Effect of vinyl acetate (VA) content and radiation dose on the alteration in mechanical,thermal, and morphological behavior

A series of ethylene vinyl acetate (EVA)/ethylene‐propylene diene elastomer (EPDM) blends (50/50 ratio) with four types of EVAs were prepared using brabender type batch mixer followed by compression molding. All compression‐molded samples were exposed to gamma radiation at 500, 1000, and 1500 kGy doses and were subjected to mechanical, compression set, thermal and morphological test. The % retention in tensile strength, elongation, and hardness were found higher for higher vinyl acetate (VA) containing radiation aged EVA/EPDM blends. The compression set value was decreased with increase of VA content. The thermal degradation kinetics of high VA containing irradiated blend (EVA40/EPDM) (EVA40 is 40%VA containing EVA) was found slower than those of lower VA containing blend (EVA18/EPDM). The surface morphology for EVA18/EPDM sample was transformed into more irregular one with more cracks and fragmented segments by aging at 1500 kGy dose while surface for EVA40/EPDM sample was found comparatively smooth, fine, and continuous with very few cracks and fragmented parts at similar dose. Thus, from the measured properties and morphology, it was revealed that the degree of degradation of blends kept on decreasing with increase in VA content. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46216.     

Removal of pyridine from water by pervaporation using filled SBR Membranes

Styrene butadiene rubber (SBR) was efficiently cured (crosslinked) by using sulfur to accelerator ratio less than unity. This cured SBR was further compounded with carbon black filler (grade N330) with three different doses i.e., 5, 10, and 20 wt % of filler to form three different filled and crosslinked membranes, i.e., SBR5, SBR10, and SBR20. These filled rubber membranes and one unfilled but efficiently cured membrane, i.e. SBR0, were used for pervaporative removal of pyridine from its mixtures with water. The filled membranes were found to show better selectivity and mechanical properties but lower flux than the unfilled membrane. All of these membranes showed reasonably good range of flux and pyridine selectivity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fluorine in Drug Design: A Case Study with Fluoroanisoles

Anisole and fluoroanisoles display distinct conformational preferences, as evident from a survey of their crystal structures. In addition to altering the free ligand conformation, various degrees of fluorination have a strong impact on physicochemical and pharmacokinetic properties. Analysis of anisole and fluoroanisole matched molecular pairs in the Pfizer corporate database reveals interesting trends: 1) PhOCF₃ increases log D by ～1 log unit over PhOCH₃ compounds; 2) PhOCF₃ shows lower passive permeability despite its higher lipophilicity; and 3) PhOCF₃ does not appreciably improve metabolic stability over PhOCH₃. Emerging from the investigation, difluoroanisole (PhOCF₂H) strikes a better balance of properties with noticeable advantages of log D and transcellular permeability over PhOCF₃. Synthetic assessment illustrates that the routes to access difluoroanisoles are often more straightforward than those for trifluoroanisoles. Whereas replacing PhOCH₃ with PhOCF₃ is a common tactic to optimize ADME properties, our analysis suggests PhOCF₂H may be a more attractive alternative, and greater exploitation of this motif is recommended.     

Improved mechanical and moisture resistance property of in situ polymerized transparent PMMA/Cellulose composites

This article evaluates the role of cellulosic fillers in a synthetic polymer matrix like polymethylmethacrylate (PMMA) when incorporated by in situ suspension polymerization technique. Cellulose micro/nanofibers (CNF) were extracted from jute fibers and chemically modified with maleic anhydride (MACNF) to increase their interfacial compatibility with PMMA by participation of the MA moiety in the free radical polymerization with MMA. The effect of incorporating MACNF on the physical and mechanical properties of the PMMA matrix was investigated. Optical transparency was retained in the in situ prepared PMMA/cellulose composites (IPMC) similar to that of unreinforced PMMA. Another set of PMMA/cellulose composites was prepared by dispersing MACNF in PMMA matrix by ex situ solution dispersion method (EPMC). The modification of CNF with MA significantly improved the filler/matrix interfacial compatibility and in situ polymerization technique further enhanced the properties of the composites. The high moisture absorption tendency, which is a major drawback of the cellulose filled composites, remarkably reduced in IPMC. POLYM. COMPOS., 36:1748–1758, 2015. © 2014 Society of Plastics Engineers     

Green composites based on high‐density polyethylene and Saccharum spontaneum: Effect of filler content on morphology,thermal, and mechanical properties

Here we report the preparation and characterization of a green composite based on high‐density polyethylene and Kaans grass (Saccharum spontaneum). The composites were prepared by conventional melt‐mixing method, using maximum loading of Kaans grass in powder form (KG‐filler) to achieve acceptable range of required properties. Maleic anhydride grafted polyethylene was used as compatibilizer to achieve effective interaction for improved surface adhesion which was confirmed by FT‐IR spectroscopy. Morphological studies revealed good interaction between the base polymer matrices and the KG‐fillers that improved the mechanical and thermal properties of the composites up to certain (10 phr) KG‐filler loading. Study on water absorption property revealed moderate increase in weight at higher KG‐filler loadings. Thermogravimetric analysis (TGA) and melt flow index (MFI) studies indicated retention of thermal stability and flow property of the HDPE/KG‐filler composite at lower filler loadings. POLYM. COMPOS., 36:2157–2166, 2015. © 2014 Society of Plastics Engineers     

Microhardness of Sputter-Deposited Zirconia Films on Silicon Wafers

Calcia-stabilized zirconia films were deposited on the surface of silicon 111 wafers using radio frequency (rf) magnetron sputter deposition. Deposition was conducted at substrate temperatures that varied in the range of 80°–900°C. X-ray diffractometry results showed that all the films consisted of cubic zirconia. The fracture surface morphology and etched surfaces of the films were studied using scanning electron microscopy (SEM). Depending on the deposition temperature, the structure of the film was either columnar or equiaxed. The transition temperature from the columnar structure to the equiaxed structure was at a ratio of deposition temperature to melting temperature of } 0.42. The microhardness of the films was evaluated using a developed model that is based on the plastic zone analysis below a diamond (Vickers) indentor. From this model, the microhardness was found to increase as the deposition temperature increased, which was probably because the hardness of ceramic materials decreases as the defect concentration increases.     

Bio-hydrometallurgical processing of low grade chalcopyrite for the recovery of copper metal

A process flowsheet was developed to recover copper metal from the lean sulfide ore of copper available at Malanjkhand, Hindustan Copper Limited (HCL), India. Copper pregnant leach solution (PLS) obtained from bio-heap leaching of chalcopyrite containing 0.3% copper was purified through solvent extraction (SX) and the copper recovered by electrowinning (EW). The copper-free raffinate obtained from SX stripping unit was returned back to the bioleaching circuit. The purity of the electrolytic copper produced at pilot scale was found to be 99.96%. During electrowinning, the effect of flow rate of electrolyte on current efficiency and energy consumption was also studied.     

Electro-Fenton treatment of synthetic organic dyes: Influence of operational parameters and kinetic study

This work investigates oxidative decolorization of two different dyes, Methylene blue and Titan yellow in aqueous solution using an environmentally friendly advanced electro-chemical oxidation (electro-Fenton) process. The effect of operating conditions like H₂O₂ concentration, current density, initial dye concentration was studied in a batch stirred cell. Individual decolorization decay kinetics for both dyes was investigated. The second-order absolute rate constants (L mol^?1 s^?1) between hydroxyl radical and dye have been calculated from experimental data by fitting it to the decolorization model. The apparent kinetic constants, k _app (s^?1) for Methylene blue and Titan yellow dye decolorization were also determined. The experimental data showed a good fit to the theoretical model, which can predict data in a wide range of % dye decolorization. This process also reduces COD of the dye solution, and the unit energy demand (UED) in kWh/kg COD removed for different electrical current has been reported.