Two New Convolutions for the Fractional Fourier Transform

In this paper we introduce two novel convolutions for the fractional Fourier transforms, and prove natural algebraic properties of the corresponding multiplications such as commutativity, associativity and distributivity, which may be useful in signal processing and other types of applications. We analyze a consequent comparison with other known convolutions, and establish necessary and sufficient conditions for the solvability of associated convolution equations of both the first and second kind in \(L^1({\mathbb {R}})\) and \(L^2 ({\mathbb {R}})\) spaces. An example satisfying the sufficient and necessary condition for the solvability of the equations is given at the end of the paper.     

Image reconstruction using interval simulated annealing in electrical impedance tomography

Electrical impedance tomography (EIT) is an imaging technique that attempts to reconstruct the impedance distribution inside an object from the impedance between electrodes placed on the object surface. The EIT reconstruction problem can be approached as a nonlinear nonconvex optimization problem in which one tries to maximize the matching between a simulated impedance problem and the observed data. This nonlinear optimization problem is often ill-posed, and not very suited to methods that evaluate derivatives of the objective function. It may be approached by simulated annealing (SA), but at a large computational cost due to the expensive evaluation process of the objective function, which involves a full simulation of the impedance problem at each iteration. A variation of SA is proposed in which the objective function is evaluated only partially, while ensuring boundaries on the behavior of the modified algorithm.     

Electrical Conductivity Measurement Through the Loaded Q Factor of a Resonant Cavity

We present a method for measuring the electrical conductivity of metallic materials that relies on the ratio of two loaded Q factors, Q_R/Q_X, with Q_R corresponding to a TE₀₁₁-mode reference cavity made of aluminum, and Q_X the Q that results upon replacing the aluminum plate with the one fabricated from the material to be examined. Electrical conductivity is mathematically inferred from the ratio Q_R/Q_X where the loaded Q factors are measured by using the transmission-type method. Within a 3.0 percent accuracy, conductivities determined at 8.7 GHz for electrolytic copper (5.6 times 10⁷ S/m) and brass (1.6 times 10⁷ S/m) show to be in good agreement with those reported in the literature.     

Experimental Study of a Ka-Band Cylindrical Open Resonator

A study of the electrodynamical properties of a Ka-band gyrotron open resonator was experimentally conducted. Experiments were accomplished to measure resonant frequencies and their respective loaded quality factors for TE modes in the frequency range from 26 to 40 GHz. In particular, a perturbation technique was used to determine the axial, radial and azimuthal electric field profiles, as an identification method of the TE₀₂₁ mode operating around 35 GHz. In any experimental event, good agreement with the values predicted by theory was found.     

Design and Implementation of Super Wide Band Triple Band-Notched MIMO Antennas

Wireless Personal Communications - Semantic Web content extracting are the augmentation of the present web where the data is given in the better importance and allowing users to work close by close...     

Real Time Anomalous Trajectory Detection and Analysis

GPS-equipped taxis can be considered as pervasive sensors and the large-scale digital traces produced allow us to reveal many hidden facts about the city dynamics and human behaviors. In this paper we present a novel GPS-based taxi system which can detect ongoing anomalous passenger delivery behaviors leveraging our proposed iBOAT method. To achieve real time monitoring, we reduce the response time of iBOAT by more than five times with an inverted index mechanism adopted. We evaluate the effectiveness of the system with large scale real life taxi GPS records while serving 200,000 taxis. With this system, we obtain about 0.44 million anomalous trajectories out of 7.35 million taxi delivery trips, which correspond to 7600 taxis’ GPS records in one month time in the city of Hangzhou, China. Through further analysis of these anomalous trajectories, we observe that: (1) Over 60 % of the anomalous trajectories are “detours” that travel longer distances and time than normal trajectories; (2) The average trip length of drivers with high-detour tendency is 20 % longer than that of normal drivers; (3) The length of anomalous sub-trajectories is usually less than a third of the entire trip, and they tend to begin in the first two thirds of the journey; (4) Although longer distance results in a greater taxi fare, a higher tendency to take anomalous detours does not result in higher monthly revenue; and (5) Taxis with a higher income usually spend less time finding new passengers and deliver them in faster speed.     

A versatile framework for a narrow- and wide-band statisticalpropagation model for the LMS channel

In this paper a framework for the development of a versatile statistical land mobile satellite (LMS) channel model, both narrow- and wide-band, is presented. First, a review is made of the different model elements that can be described statistically. Another specification set for the development of a comprehensive statistical model is that some physical/geometrical information should be included in spite of its fully statistical nature. The model shall be valid for applications such as communications, broadcast, navigation, etc., also it must consider different orbit types, and frequency bands. This paper summarises some of the activities to be carried out under ESA (European Space Agency) Contract No 12409/97/NL/NB for the development of a “Statistical Model for the LMS Channel”     

Analysis and measurement of mode polarizers in square waveguide

A general analysis approach for strip metallization structures enclosed in rectangular or square waveguide is presented. The technique involves the novel application of a commercially available 2.5-dimensional (2.5-D) method-of-moments-based (MoM) electromagnetic (EM) analysis tool to a three-dimensional (3-D) waveguide problem. Very good agreement is demonstrated between computed and measured results for several printed strip linear polarizers embedded within a square waveguide environment. This paper, to the authors' knowledge, represents the first such comparison of phase and magnitude between computed and measured data for strip grid polarizers in a waveguide environment. The developed approach involves construction of a theoretical waveguide “test fixture” and an associated theoretical de-embedding procedure. Computational advantages are expected over the alternative approach of using a finite-element-based fully 3-D analysis approach. The polarizer results have potential application to shielded versions of quasi-optic array components that have been demonstrated in open geometries, as well as to multimode antenna feeds, waveguide filters, and matching networks     

Detection of Channel Variations to Improve Channel Estimation Methods

In current digital communication systems, channel information is typically acquired by supervised approaches that use pilot symbols included in the transmit frames. Given that pilot symbols do not convey user data, they penalize throughput spectral efficiency, and transmit energy consumption of the system. Unsupervised channel estimation algorithms could be used to mitigate the aforementioned drawbacks although they present higher computational complexity than that offered by supervised ones. This paper proposes a simple decision method suitable for slowly varying channels to determine whether the channel has suffered a significant variation, which requires to estimate the matrix of the recently changed channel. Otherwise, a previous estimate is used to recover the transmitted symbols. The main advantage of this method is that the decision criterion is only based on information acquired during the time frame synchronization, which is carried out at the receiver. We show that the proposed criterion provides a considerable improvement of computational complexity for both supervised and unsupervised methods, without incurring in a penalization in terms of symbol error ratio. Specifically, we consider systems that make use of the popular Alamouti code. Performance evaluation is accomplished by means of simulated channels as well as making use of indoor wireless channels measured using a testbed.