Nanoindentation measurement of core–skin interphase viscoelastic properties in a sandwich glass composite

Mechanics of Time-Dependent Materials - Debonding at the core–skin interphase region is one of the primary failure modes in core sandwich composites under shear loads. As a result, the...     

热挤压变形力计算的研究

本文考虑到变形区内切应力非线性分布的特点,采用球坐标系下的平衡微分方程和塑性条件联立求解,得出圆棒热挤压时变形区入口球面上的应力分布方程,然后应用功平衡法导出了圆棒热挤压力的计算公式。     

Fabrication of Cu(In,Ga)Se2 thin films by ion beam sputtering deposition from a quaternary target at different substrate temperatures

Cu(In, Ga)Se₂ (CIGS) thin films were fabricated by ion beam sputtering deposition from a single quaternary target at different substrate temperatures (T _sub). The thin films were characterized with X-ray diffractometry, scanning electron microscopy, energy-dispersive X-ray spectroscopy and four-point probe technique to study the microstructures, surface morphology, composition and electrical properties, respectively. The results show that the films grown above 400?°C are of chalcopyrite structure. Cu(In_0.7Ga_0.3)Se₂ thin film was obtained when T _sub is 550?°C. The Cu and Se atomic percentage when T _sub is above 500?°C is higher than when T _sub is below 500?°C. With the increase in T _sub, the surfaces morphology of the films is denser and the resistivity of the films decreases.     

Preparation and thermophysical properties of nano-sized Ln2Zr2O7 (Ln?=?La, Nd, Sm, and Gd) ceramics with pyrochlore structure

Rare earth zirconates (Ln₂Zr₂O₇, Ln = La, Nd, Sm, and Gd) with pyrochlore structure were prepared by hydrothermal method with polyethylene glycol as surfactant. X-ray diffraction, thermogravimetric analysis/differential scanning calorimetry, Fourier transform infrared spectroscopy, Raman spectroscopy, and field emission scanning electron microscopy were utilized to characterize the phase structure, thermal decomposition, and morphology of the products. Qualitative analysis indicates that the as-prepared zirconates are pyrochlore-type structures. The specific surface area, lattice parameter, and average crystallite size of the as-prepared products are closely related to the ionic radius. The activation energy of crystal growth shows an increasing trend with the decrease in ionic radii. The sintering behavior of compacted body was also investigated, revealing that the sintering-resistance properties of Ln₂Zr₂O₇ are descending as the order of La₂Zr₂O₇, Nd₂Zr₂O₇, Sm₂Zr₂O₇, and Gd₂Zr₂O₇.     

汽车挡风玻璃刮雨器的控制

本拟设计了一种用于汽车挡风玻璃上的自动雨点检测器及刮雨器控制装置,其原理利用了挡风玻璃中的光波导作用,并经模拟实验证实此方案可行。     

30.4 nm Si/C多层膜反射镜的制备与测量

采用离子束溅射镀膜装置制备了一种新的材料组合Si/C多层膜 ,用于 30 4nm波段的正入射多层膜反射镜。并用软X射线反射率计测得其反射比最大值为 0 14。有效地抑制了 15 0nm处的二级衍射峰。     

Effect of V doping concentration on the electronic structure,optical and photocatalytic properties of nano-sized V-doped anatase TiO2

V-doped TiO₂ with V/Ti ratio of 1–5% has been synthesized by hydrothermal method and then characterized by XRD, TEM, BET specific surface area, XPS and UV–vis. absorption spectra. The photocatalytic activity of the as-synthesized samples was investigated by the degradation of methylene blue in aqueous solution under visible light irradiation. Density functional theory (DFT) based calculations were performed to investigate the mechanism of band gap narrowing, the shift of light absorption edge, the location of V in the TiO₂ lattice and the variation in electronic and optical properties of TiO₂ with the increase of V doping concentration. Irrespective of the V doping concentration, TEM images indicate that all the doped samples were composed of equiaxed spherical anatase TiO₂ particles with good crystallinity and uniform particle size distribution. Both the experimental results from XPS survey and the theoretical calculation argue that the doped V replaces the lattice Ti and form substitutional impurity. The visible light absorption can be optimized by adjusting the V doping concentration. Among the doped samples with different V doping concentrations, the sample with V/Ti ratio of 2% depicts better visible light photocatalytic activity due to the enhanced visible light absorption and improved separation of electron–hole pairs.     

全层片状TiAl基合金断裂过程的原位观察

利用ＳＥＭ拉伸台，研究了Ｔｉ－３３Ａｌ－３Ｃｒ－０．５Ｍｏ合金的室温拉伸断裂动态过程。试验结果表明，具有全层片状显微组织的ＴｉＡｌ合金室温断裂韧性较高，归因于合金拉伸过程中裂纹尖端发生分叉致使应力松弛而使裂纹钝化；在变形过程中，主裂纹尖端附近的微裂纹之间形成剪切韧带，剪切韧带韧化是ＴｉＡｌ合金的一种韧化机理。     

Analysis of miRNA Expression Profiling of RIP2 Knockdown in Chicken HD11 Cells When Infected with Avian Pathogenic E. coli (APEC)

Colibacillosis is an acute and chronic avian disease caused by avian pathogenic E. coli (APEC). Previous studies have demonstrated that RIP2 plays a significant role in APEC infection. Moreover, increasing evidence indicates that microRNAs (miRNAs) are involved in host–pathogen interactions and the immune response. However, the role of miRNAs in the host against APEC infection remains unclear. Herein, we attempted to reveal new miRNAs potentially involved in the regulation of the immune and inflammatory response against APEC infection, with a particular focus on those possibly correlated with RIP2 expression, via miRNA-seq, RT-qPCR, Western blotting, dual-luciferase reporter assay, and CCK-8. The results showed that a total of 93 and 148 differentially expressed (DE) miRNAs were identified in the knockdown of RIP2 cells following APEC infection (shRIP2+APEC) vs. knockdown of RIP2 cells (shRIP2) and shRIP2 vs. wild-type cells (WT), respectively. Among those identified DE miRNAs, the biological function of gga-miR-455-5p was investigated. It was found that gga-miR-455-5p regulated by RIP2 was involved in the immune and inflammatory response against APEC infection via targeting of IRF2 to modulate the expression of type I interferons. Additionally, RIP2 could directly regulate the production of the type I interferons. Altogether, these findings highlighted the crucial role of miRNAs, especially gga-miR-455-5p, in host defense against APEC infection.