Influence of Temperature on the Dynamic Tensile Behavior of Zirconium

The influence of temperature on the dynamic tensile behavior of Zr has been investigated. Bullet-shaped Zr samples with two different textures were dynamically extruded at room temperature and 523 K (250 °C). A higher ductility was measured for samples deformed at elevated temperature as compared to those extruded at room temperature. This difference in ductility is discussed in terms of zirconium’s ability to accommodate plastic deformation via thermally enhanced slip activity, as evidenced by examination of the deformed microstructures.     

Experimentation and the evaluation of energy efficiency programs

The use of experiments— particularly randomized controlled trials (RCTs) where subjects are randomly assigned to treatment and control conditions—has rarely been applied to the process of improving the design of energy efficiency programs and, more fundamentally, to determining the net savings from energy efficiency programs. This paper discusses the use of experimentation in the energy efficiency program field with the hope of explaining how these experiments can be used, and identifying the barriers to their use will cause more experimentation to occur. First, a brief overview of experimental methods is presented. This discussion describes the advantages and disadvantages of conducting experiments in the context of the development and evaluation of energy efficiency programs. It then discusses barriers to the use of experimental methods (including cost and equity issues) and suggests some ways of overcoming these barriers. Finally, recommendations are made for implementing key social experiments, discussing the types of energy efficiency programs and issues that can make use of experimentation and variables that one might use for selecting treatments.     

Development of Novel Pre-alloyed PM Steels for Optimization of Machinability and Fatigue Resistance of PM Components

It is well known that a large proportion of ferrous PM components require secondary machining operations for dimensional conformance or for producing geometrical features that cannot be generated during die compaction. Nevertheless, the machining behavior of PM parts is generally characterized as being “difficult” due to the presence of residual porosity that lowers thermal conductivity and induces interrupted cutting. Several admixed additives such as MnS and BN-h can be used to improve the machining behavior of PM steels. Nevertheless, their negative effect on mechanical properties, especially fatigue resistance, makes their utilization uninteresting for the fabrication of high-performance PM steel components. This article summarizes the work carried out to develop a novel PM steel that was especially engineered to form machinability enhancing precipitates. This new material is pre-alloyed with tin (Sn) in order to form Cu-Sn (Cu(α)) precipitates during transient liquid phase sintering. The newly developed material presents machinability improvement of 165% compared to reference material used in the PM industry as well as increases in toughness and fatigue resistance of 100% and 13%, respectively.     

Processing and characterization of nanostructured Cu-carbon nanotube composites

Carbon nanotube (CNT) reinforced nanostructured Cu matrix composite with a grain size less than 25 nm has been successfully fabricated via a combination of ball milling and high-pressure torsion. CNTs were found to be homogeneously dispersed into the metal matrix, leading to grain refinement with a narrow grain size distribution and significant increase in hardness.     

Validation of a Method for Quantitation of Soybean Lectin in Commercial Varieties

Soybean agglutinin (SBA) protein, also known as soybean lectin, is regarded as an anti‐nutrient due to its negative effect on the ability of monogastric animals to gain weight following consumption of raw soybean seed. Historically, SBA has been measured using a time‐consuming and cumbersome hemagglutination procedure. The objective of our research was to obtain a validated methodology that is precise and accurate in the measurement of SBA while allowing minimally equipped laboratories to effectively conduct the analysis, thus our focus was on evaluating an existing commercially available ELISA, an enzyme‐linked‐lectin‐assay (ELLA), and a hybrid ELISA/ELLA. A new ELLA technique that can detect and quantify lectins was chosen and modified specifically for the quantitation of SBA in soybean seed. The proposed ELLA methodology is similar to a standard sandwich ELISA, and uses polyacrylamide‐linked N‐acetylgalactosamine (Gal–NAc–PAA) for a capture phase and the biotinylated version (Gal–NAc–PAA–Biotin) for detection. Based upon the validation data, the ELLA method can precisely and accurately determine soybean lectin levels in soybean seed. The validated ELLA method was used to quantify SBA in nine commercial soybean varieties introduced between 1972 and 2008 and demonstrated that the natural variability of SBA is subject to the effects of genotype and environment.     

Diamantartige Kohlenstoffschichten steigern die Effizienz

Diamond‐like carbon thin films enhance efficiency — laser arc deposition of ta‐C Rising prices for fossil fuels as well as the increasing effects of the climate change due to the emission of greenhouse gases reveal the necessity of saving energy. Low friction coatings have an enormous potential in saving energy. Carbon based coatings — named as DLC coatings — are especially well suited for low friction coatings. In particular hydrogen‐free tetrahedral amorphous carbon (ta‐C) coatings are of great interest due to their extraordinary low wear properties. In addition they show excellent low friction properties and especially in combination with specific lubricants the so‐called super low friction effect. For the deposition of ta‐C coatings PVD methods have to be applied instead of CVD methods as it is the case for conventional DLC coatings. We have developed a deposition method which is based on a pulsed arc steered by a laser (Laser‐Arc). This allows us to use large cathodes resulting in a high long‐term stability. Furthermore, the carbon plasma source can be combined with a filtering unit removing almost all droplets and particles, which usually are characteristic for an arc process. The resulting Laser‐Arc source allows for the deposition of smooth and virtually defect‐free ta‐C coatings with a competitive deposition rate.     

起步 合作式多学科的框架流程式教学

在卡尔·斯坦尼茨的景观规划和设计教学框架流程中,作为主要成果的＂改变模型＂的起步阶段是最艰难也是最重要的。在简述其教学框架流程的基本内容和使用方式之后,介绍了百慕大和墨西哥泰波兹特兰两个设计课题的教学过程,最后讨论了教学中团队合作的角色分工问题。     

Implementing a multiskilled workforce

Recent studies show the construction industry in the USA is facing a long term labour shortage. Multiskilling has been suggested as a strategy to address this issue by utilizing existing workers more efficiently. Multiskilling decreases the number of workers hired for a project and can improve productivity. Additional benefits include higher income and increased employability of the workforce. To take full advantage of these benefits, the workforce strategy and the planning and scheduling processes of a construction project must be adapted to use multiskilling effectively and efficiently. The multiskilled workforce should be scheduled and organized to maximize the duration of employment for workers, reduce the overall labour requirements and cover the skills combinations required by the project. This research synthesizes and formalizes the methods that successful construction companies are currently applying to implement a multiskilled workforce. A methodology for implementing multiskilling is outlined as well.