Reuterin and High Hydrostatic Pressure Treatments on the Inactivation of Listeria monocytogenes and Effect on the Characteristics of Cold-Smoked Salmon

The effect of reuterin and high hydrostatic pressure (HHP) processing at 450 MPa for 5 min on the inactivation of Listeria monocytogenes and the characteristics of cold-smoked salmon during 35 days at 4 and 10 °C were investigated. The growth rate of the pathogen was reduced by reuterin addition and a synergistic antimicrobial effect against L. monocytogenes was recorded when the biopreservative was applied in combination with HHP at 450 MPa for 5 min. This combined treatment prevented the pathogen recovery observed with individual treatments and delayed the spoilage of smoked salmon maintaining total viable counts under 3.5 log units during 35 days of storage at 4 °C. All treatments assayed induced changes in lightness (L*) and redness (a*), resulting in a brighter appearance of smoked salmon, whereas no modifications were recorded in shear strength values immediately after treatments. Moreover, reuterin and HHP treatments, individually or in combination, avoided the formation of biogenic amines during the 35 days of storage at 4 and 10 °C. The addition of reuterin in combination with HHP at 450 MPa for 5 min might be applied as a hurdle technology to improve the safety and extend the shelf life of lightly preserved seafood products, such as cold-smoked salmon.     

Evaluation of SPE as Preparative Technique for the Analysis of Phenolic Metabolites in Human Feces

Solid phase extraction (SPE) methodology has been evaluated as a cleanup strategy prior to the analysis of phenolic metabolites in fecal samples by UPLC–DAD–ESI–TQ MS. Among the sorbents tested, Oasis® HLB led to the higher phenolic standard recoveries. Sample acidification (0.4 M HCl, final concentration) before SPE considerably improved standard recoveries. Values of the process efficiency (C_SPE/C_{Without SPE}) for a standard solution containing gallic acid, protocatechuic acid, caffeic acid, benzoic acid, 3-phenylpropionic acid, (+)-catechin, (?)-epicatechin, procyanidin B2, and 4-hydroxybenzoic 2,3,5,6 d₄ acid were acceptable (>90 %) for all compounds, except for procyanidin B2 (26 %). The developed SPE methodology was applied to fecal samples of individuals subjected to a wine intervention study. Phenolic metabolites, including intermediate metabolites (phenyl-γ-valerolactones and phenylvaleric acid derivatives) and end products (simple phenols, hydroxyphenylpropionic, hydroxyphenylacetic, hydroxycinnamic, and hydroxybenzoic acids) were identified. Most of the compounds (n?=?14) exhibited values of process efficiency between 85 and 115 %. Although some compounds (n?=?4) showed process efficiency>115 %, there was a group of metabolites (4-O-methylgallic acid, syringic acid, and 4-hydroxy-5-(3′,4′-dihydroxyphenyl)-valeric acid) whose process efficiency was <85 %, which represented a serious limitation and made us to discard SPE as a preparative technique for the analysis of these phenolic metabolites. Finally, the paper reports the concentrations of phenolic metabolites in a randomized set of human fecal samples from healthy volunteers (n?=?15) without any previous SPE application. Large inter-individual variability was observed, which was attributed to differences in human gut microbiota composition.     

Determination of Phenolic Compounds in Artichoke,Garlic and Spinach by Ultra-High-Performance Liquid Chromatography Coupled to Tandem Mass Spectrometry

Phenolic compounds were determined in artichoke (Cynara scolymus), garlic (Allium sativium) and spinach (Spinacia oleracea) using a single method based on simple extraction and ultra-high-performance liquid chromatography coupled to triple quadrupole tandem mass spectrometry (UHPLC-QqQ-MS/MS). Several compounds belonging to different families, such as phenolic acids, isoflavones, flavones and flavonols, were determined. The analytical procedure was validated in all the matrices, obtaining recoveries ranging from 60 to 120 % with reproducibility values (expressed as relative standard deviations (RSDs)) lower than 26 %. Limits of quantification (LOQs) were always equal to or lower than 50 μg/kg, except to kaempferol and its glucosides in spinach (LOQs?=?75 μg/kg). Artichoke showed higher concentration of phenolic compounds (837.2 mg/kg dry weight (DW)) than garlic (26.5 mg/kg DW) or spinach (64.5 mg/kg DW). Apigenin 7-O-glucoside (from 147.0 to 722.7 mg/kg DW) was found to be the major flavonoid in all samples of artichoke investigated, while chlorogenic acid, whose concentration ranged from 37.8 to 734.7 mg/kg DW, is the major phenolic acid in this matrix. Regarding garlic, caffeic acid (from 1.7 to 28.3 mg/kg DW) and quercetin (from 9.0 to 18.9 mg/kg DW) were the compounds detected at higher concentrations, although in general the total content was very low in relation to other matrices. In relation to spinach, ferulic acid was the major phenolic compound, and its concentration ranged from 18.0 to 41.4 mg/kg DW.     

Molecular diversity of Staphylococcus aureus and the role of milking equipment adherences or biofilm as a source for bulk tank milk contamination

Staphylococcus aureus is one of the most frequent pathogens causing intramammary infections in dairy herds. Consequently, virulence factors, pathobiology, and epidemiology of Staphylococcus aureus strains have been widely assessed through the years. Nevertheless, not much has been described about the epidemiology of Staph. aureus strains from bulk tank milk (BTM) and adherences on milking equipment (AMES), even when these strains may play a role in the quality of milk that is intended for human consumption. The objective of this study was to assess the strain diversity of 166 Staph. aureus isolates collected from 3 consecutive BTM samples, and from AMES in contact with milk from 23 Chilean dairy farms. Isolates were analyzed and typed using pulsed-field gel electrophoresis. Diversity of strains, both within and among farms, was assessed using Simpson's index of diversity (SID). On farms where Staph. aureus was isolated from both AMES and BTM (n = 8), pulsotypes were further analyzed to evaluate the role of AMES as a potential source of Staph. aureus strains in BTM. Among all Staph. aureus analyzed by pulsed-field gel electrophoresis, a total of 42 pulsotypes (19 main pulsotypes and 23 subtypes) were identified. Among dairy farms, strain diversity was highly heterogeneous (SID = 0.99). Within dairy farms, Staph. aureus strain diversity was variable (SID = 0 to 1), and 18 dairy operations (81.8%) had one pulsotype that was shared between at least 2 successive BTM samples. In those farms where Staph. aureus was isolated in both AMES and BTM (n = 8), 7 (87.5%) showed a clonal distribution of Staph. aureus strains between these 2 types of samples. The overlapping of certain Staph. aureus strains among dairy farms may point out common sources of Staph. aureus among otherwise epidemiologically unrelated farms. Indistinguishable Staph. aureus strains between AMES and BTM across dairy farms suggest that Staph. aureus–containing AMES may represent a source for BTM contamination, thus affecting milk quality. Our study highlights the role of viable Staph. aureus in AMES as a source for BTM contamination on dairy farms, and also describes the overlapping and presence of specific BTM and AMES pulsotypes among farms.     

In Vitro Models for Studying Secondary Plant Metabolite Digestion and Bioaccessibility

There is an increased interest in secondary plant metabolites, such as polyphenols and carotenoids, due to their proposed health benefits. Much attention has focused on their bioavailability, a prerequisite for further physiological functions. As human studies are time consuming, costly, and restricted by ethical concerns, in vitro models for investigating the effects of digestion on these compounds have been developed and employed to predict their release from the food matrix, bioaccessibility, and assess changes in their profiles prior to absorption. Most typically, models simulate digestion in the oral cavity, the stomach, the small intestine, and, occasionally, the large intestine. A plethora of models have been reported, the choice mostly driven by the type of phytochemical studied, whether the purpose is screening or studying under close physiological conditions, and the availability of the model systems. Unfortunately, the diversity of model conditions has hampered the ability to compare results across different studies. For example, there is substantial variability in the time of digestion, concentrations of salts, enzymes, and bile acids used, pH, the inclusion of various digestion stages; and whether chosen conditions are static (with fixed concentrations of enzymes, bile salts, digesta, and so on) or dynamic (varying concentrations of these constituents). This review presents an overview of models that have been employed to study the digestion of both lipophilic and hydrophilic phytochemicals, comparing digestive conditions in vitro and in vivo and, finally, suggests a set of parameters for static models that resemble physiological conditions.     

In vitro studies and preliminary in vivo evaluation of silicified concentrated collagen hydrogels

Hybrid and nanocomposite silica-collagen materials derived from concentrated collagen hydrogels were evaluated in vitro and in vivo to establish their potentialities for biological dressings. Silicification significantly improved the mechanical and thermal stability of the collagen network within the hybrid systems. Nanocomposites were found to favor the metabolic activity of immobilized human dermal fibroblasts while decreasing the hydrogel contraction. Cell adhesion experiments suggested that in vitro cell behavior was dictated by mechanical properties and surface structure of the scaffold. First-to-date in vivo implantation of bulk hydrogels in subcutaneous sites of rats was performed over the vascular inflammatory period. These materials were colonized and vascularized without inducing strong inflammatory response. These data raise reasonable hope for the future application of silica-collagen biomaterials as biological dressings.     

Long-range electron tunnelling in oligo-porphyrin molecular wires

Short chains of porphyrin molecules can mediate electron transport over distances as long as 5-10 nm with low attenuation. This means that porphyrin-based molecular wires could be useful in nanoelectronic and photovoltaic devices, but the mechanisms responsible for charge transport in single oligo-porphyrin wires have not yet been established. Here, based on electrical measurements of single-molecule junctions, we show that the conductance of the oligo-porphyrin wires has a strong dependence on temperature, and a weak dependence on the length of the wire. Although it is widely accepted that such behaviour is a signature of a thermally assisted incoherent (hopping) mechanism, density functional theory calculations and an accompanying analytical model strongly suggest that the observed temperature and length dependence is consistent with phase-coherent tunnelling through the whole molecular junction.     

One Step Lithography of Polypyrrole

Large areas of polypyrrole (PPy) thin films deposited onto inert polymeric substrates are structured by direct laser interference patterning (DLIP). Several square millimeter areas could be produced with one single (10 ns) pulse, at room temperature and atmospheric pressure. Nanometric arrays of lines (>600 nm) or grids of PPy deposited on dielectric polymers polypropilene or polypirrol (PP or PE) are fabricated by DLIP at 355 nm. The period of the lines structures, measured by white light interferometry (WLI), is 3.5 µm. Regular structures are analyzed using scanning electron microscope (SEM) and a focus ion beam (FIB) tomography. It is shown that only the PPy film is structured while the PP or PE substrate remains unaltered. Fourier transform infrared spectroscopy (FTIR) and UV‐vis spectroscopy, permit to ensure that PPy chemical structure remains unaltered after the structuration process. The width of PPy lines can be tailored by controlling the fluence of the laser beam. Contact angle measurement shows that the wettability is affected by the structuring, making the surface more hydrophobic. The structuring technique seems to be suitable for the fabrication of PPy regular structures over various substrates.