Enhanced field induced martensitic phase transition and magnetocaloric effect in Ni55Mn20Ga25 metallic foams

The high surface/volume ratio and mechanical stability under cyclic strain makes polycrystalline Ni–Mn–Ga metallic foams attractive for magnetic refrigeration. By means of comparison with a polycrystalline bulk material, we have demonstrated that the porous structure of Ni_54.8Mn_20.2Ga_25.0 open-cells metallic foams (porosity varying between 44% and 58%) reduces the temperature span of the phase transition and increases the magnetocaloric effect (MCE). MCE was investigated using calorimetry in a magnetic field. Temperature scan and isothermal experiments have shown a 0.8 K T^?1 shift of the phase transition temperature and a maximum irreversible entropy change of 2.5 Jkg^?1 K^?1. The results indicate that metallic foams can represent a good approach for enhancing field induced phase transitions in magnetic refrigeration applications.     

On the asymptotic behaviour of shells of revolution in free vibration

We consider the free vibration problem of thin shells of revolution of constant type of geometry, focusing on the asymptotic behaviour of the lowest eigenfrequency, as the thickness tends to zero. Numerical experiments are computed using two discretization methods, collocation and finite elements, each corresponding to a different shell model. Our results are in agreement with theoretical results obtained using interpolation theory and cited in literature.     

Influence of counterface roughness on friction properties of engineering plastics for bearing applications

The study investigates the effects of the roughness of the metal counterface (mirror finished or polished) on the coefficient of dry friction for some of the most common engineering plastics used in current bearing technology. The results show that an optimal roughness for minimum friction is likely to exist for any polymer, and it depends on the bulk properties of the polymer itself. “Soft” plastics characterized by a low modulus of elasticity exhibit better sliding behaviour on very smooth, mirror finished surfaces, whereas for high-modulus plastics lower friction is measured in combination with rougher, polished counterfaces. The influence of the contact pressure and sliding velocity are also investigated and found to depend on the layout of the tribological system.     

A solidification model for prediction of castability in the precipitation-strengthened nickel-based superalloys

The Scheil equation was used to model the solidification path, microsegregation of alloying elements in the interdendritic regions, solidification temperature ranges, and to predict the formation of secondary structures and the castability behavior of as-cast superalloys. 4 experimental alloys with pre-specified γ-Ti,Nb,Al,Mo composition containing different Nb, Ti and Al contents were designed using vacuum induction melting furnace. The produced as-cast superalloys were characterized using optical and scanning electron microscopy equipped with energy dispersive X-ray spectrometer and TG–DSC analysis. The experiments showed logic conformity to the modeling results. The model and experiment confirmed the highest segregation behavior for Ti and Nb. All the experimental superalloys indicated the remarkable tendency to form secondary eutectic structures at the last stages of solidification. Superalloy with chemical composition of γ-3.5%Mo,1.8%Al,4%Ti,2.9%Nb showed the shorter solidification temperature range and the best castability.     

Morphological,Electrical, and Chemical Changes in Cyclically Contacting Polycrystalline Silicon Surfaces Coated with Perfluoroalkylsilane Self-Assembled Monolayer

The evolution of morphology, electrical properties, and chemical composition has been studied in cyclically contacting polycrystalline silicon (polysilicon) surfaces coated with perfluoroalkylsilane self-assembled monolayer (SAM). The microinstrument used is a MEMS cantilever that is repeatedly actuated out-of-plane to impact a landing pad and is then moved in-plane to enable nondestructive in situ inspection of the impacted area. Analyses show that a device with a monolayer coating exhibits signs of surface degradation after a much higher number of cycles than its uncoated counterpart. A sharp increase in contact resistance between the cantilever and landing pad is observed at ~10 billion cycles for a coated device, versus ~25 million cycles for an uncoated device. Likewise, the onset of grain fracture in the landing pad occurs at ~25 billion cycles for the SAM-coated device, versus ~3 billion cycles for its uncoated counterpart. The effectiveness of the monolayer coating diminishes after more than 100 billion contact cycles as the SAM layer is removed, and the polysilicon substrate becomes susceptible to adhesive wear.     

Cyclic bond behaviour of plain bars. Part I: Experimental investigation

In recent years there has been wide use of non-linear dynamic analysis for the evaluation of existing structures in areas of high seismic risk. In the simulation of the cyclic behaviour of elements in reinforced concrete (RC) its bonding performance cannot be ignored. There are numerous numerical models developed in recent decades which can explicitly account for the slip between reinforcing bars and the surrounding concrete through the definition of the local hysteretic bond–slip relationship. As for plain bars, commonly used in reinforced concrete buildings before the 1970s, there are almost no references to hysteretic bond mechanisms.This paper describes the results of a series of monotonic and cyclic pull-out tests aimed at the assessment of the bond performances of plain round bars. Monotonic behaviour is characterized by a first ascending branch, up to the maximum bond strength; in this phase, as the slip increases, chemical–physical adhesion and micro-interlocking between the cement paste and the indentations of the bar surface progressively activate. During post-peak phase the only frictional contribute is present, gradually degrading towards a minimum value as the slip increases. The two parameters, maximum bond strength and minimum frictional bond, in spite of the high variability shown, seem to reflect well the literature indications about bond performances of plain bars. In cyclic field, where the only frictional mechanism is present, experimental results show a significant degradation of bond capacities. Hysteretic cycles show a singular shape, characterized by a reloading phase showing a slight reduction for slip values approaching zero and a subsequent increase in bond stress towards the maximum imposed slip. Bond stresses in cyclic field show a high variability, but it is generally possible to recognize a decreasing trend both with the number of cycles and with the maximum imposed slip.     

One year of ICTP diploma courses on-line using the automated EyA recording system

The 12-month pre-Ph.D. ICTP Diploma Courses in the fields of Condensed Matter Physics, High Energy Physics, Mathematics, Earth System Physics and Basics Physics have been recorded using the automated, low cost recording system called EyA developed in-house. We discuss the technical details on how these recordings were implemented, together with some web usage statistics and students feedback. As yet, no similar endeavor has been made to put on-line a complete high-level Diploma Programme, due to the high costs involved when using alternative recording solutions. These recordings are freely available on the website www.ictp.tv.     

Removal of exhausted oils by adsorption on mixed Ca and Mg oxides

Adsorption tests were performed on two different exhausted oils to reduce their polluting and health hazard potential: a "water-insoluble oil", utilised for automotive engine lubrication, and an "emulsified" oil, used as coolant for metal-cutting tools. Dolomite, a low-cost recovery material, was used to prepare two effective adsorbents: (a) a mixed Ca and Mg oxide obtained by thermal decomposition of dolomite at 1800 degrees C, and (b) an activated material obtained by submitting this product to chemical treatment with HCl. Preliminary tests carried out with an excess of the former material showed that the insoluble oil was adsorbed with lower yield (Y = 0.40) than the soluble (emulsified) oil (Y = 0.60). The material activation with HCl remarkably improved the adsorption of soluble oil organic fraction (Y > 0.90), while only a little increase in the removal yield was observed for the insoluble oil (Y = 0.44). The results presented and discussed in this work pointed out that the products of dolomite calcination can successfully replace the conventional adsorbing materials in the removal of organic pollutants, with particular concern to exhausted soluble oils, which cannot usually be recycled, thus reducing the operational costs of their treatment.     

The intriguing role of spanish language vocabulary knowledge in predicting English reading comprehension.

This study explored a holistic model of English reading comprehension among a sample of 135 Spanish-English bilingual Latina and Latino 4th-grade students This model took into account Spanish language reading skills and language of initial literacy instruction. Controlling for language of instruction, English decoding skill, and English oral language proficiency, the authors explored the effects of Spanish language alphabetic knowledge, fluency, vocabulary knowledge, and listening comprehension on English reading comprehension. Results revealed a significant main effect for Spanish vocabulary knowledge and an interaction between Spanish vocabulary and English fluency, such that faster English readers benefited more from Spanish vocabulary knowledge than their less fluent counterparts. This study demonstrates the existence of literary skills transfer from the 1st to the 2nd language, as well as limits on such transfer. (PsycINFO Database Record (c) 2010 APA, all rights reserved)