Testing the hypothesis of a block compound symmetric covariance matrix for elliptically contoured distributions

In this paper, the authors study the problem of testing the hypothesis of a block compound symmetry covariance matrix with two-level multivariate observations, taken for m variables over u sites or time points. Through the use of a suitable block-diagonalization of the hypothesis matrix, it is possible to obtain a decomposition of the main hypothesis into two sub-hypotheses. Using this decomposition, it is then possible to obtain the likelihood ratio test statistic as well as its exact moments in a much simpler way. The exact distribution of the likelihood ratio test statistic is then analyzed. Because this distribution is quite elaborate, yielding a non-manageable distribution function, a manageable but very precise near-exact distribution is developed. Numerical studies conducted to evaluate the closeness between this near-exact distribution and the exact distribution show the very good performance of this approximation even for very small sample sizes and the approach followed allows us to extend its validity to situations where the population distributions are elliptically contoured. A real-data example is presented and a simulation study is also conducted.     

Design Optimization of Composite Prosthetic Tubes Using GA-ANN Algorithm Considering Tsai-Wu Failure Criteria

The investigation of possible failures in composite materials is a matter of very great importance, and the Tsai-Wu criterion is an effective criterion for analyzing those flaws in anisotropic materials and defining whether the material at a given load will or will not suffer structural failure. In this study, an optimization procedure is proposed to minimize the maximum value of Tsai-Wu of laminated composite tubes subject to axial loading. Artificial neural networks and genetic algorithms are chosen as optimization tools. The results of this study show that the developed algorithm converges faster. Then, the maximum Tsai-Wu value is used as the objective function and the fiber orientations are the constraints in the optimization process. The results yielded by them are compared and discussed. Optimal results are compared with respect to the usual initial design. The design approach is recommended for structures where composites are the key load-carrying members such as orthopedic prosthesis.     

3D Orientational Control in Self‐Assembled Thin Films with Sub‐5 nm Features by Light

While self‐assembled molecular building blocks could lead to many next‐generation functional organic nanomaterials, control over the thin‐film morphologies to yield monolithic sub‐5 nm patterns with 3D orientational control at macroscopic length scales remains a grand challenge. A series of photoresponsive hybrid oligo(dimethylsiloxane) liquid crystals that form periodic cylindrical nanostructures with periodicities between 3.8 and 5.1 nm is studied. The liquid crystals can be aligned in‐plane by exposure to actinic linearly polarized light and out‐of‐plane by exposure to actinic unpolarized light. The photoalignment is most efficient when performed just under the clearing point of the liquid crystal, at which the cylindrical nanostructures are reoriented within minutes. These results allow the generation of highly ordered sub‐5 nm patterns in thin films at macroscopic length scales, with control over the orientation in a noncontact fashion.     

On the Structure of Amorphous Mesoporous Silica Nanoparticles by Aberration‐Corrected STEM

Mesoporous silica materials have demonstrated a vast spectrum of applications, stimulating an intensive field of study due to their potential use as nanocarriers. Nonetheless, when produced at the nanoscale, their structural characterization is hindered due to the re‐arrangement of the pores. To address this issue, this work combines molecular dynamics simulations with electron microscopy computer simulations and experimental results to provide an insight into the structure of amorphous mesoporous silica nanoparticles. The amorphous silica model is prepared using a simple melt‐quench molecular dynamics method, while the reconstruction of the mesoporous nanoparticles is carried out using a methodology to avoid false symmetry in the final model. Simulated scanning transmission electron microscopy images are compared with experimental images, revealing the existence of structural domains, created by the misalignment of the pores to compensate the surface tension of these spherical nanoparticles.     

Analysis of bioenergy production at different levels of integration in energy-driven biorefineries

In this paper, a techno-economic and environmental assessment is performed to compare the stand-alone process and biorefinery ways to produce biodiesel, ethanol and butanol as potential cases for bioenergy production using fresh fruit bunches as raw material. Different levels of integration are considered (e.g., mass and energy integration, non-conventional technologies) along with the analysis of the process scale to determine the economic profitability and environmental impacts of the proposed cases. The results demonstrated that the biodiesel production based on the biorefinery concept has a positive effect on the profitability of the stand-alone process at different scales. The economic results were compared with data reported in the literature. Furthermore, the life cycle analysis of the proposed cases suggested that the deployment of the biorefinery concept at different levels of integration in the oil palm supply chain reduced the environmental impact of the biodiesel production, which was selected as the hotspot of the evaluated cases.     

Microfluidic liquid actuation through ground-directed electric discharge

In this article, we present a new technique to actuate liquids in microchannels using ground-directed electric discharge generated by a portable corona device. When an electric discharge is applied, the air in the microchannel is ionized causing a change in the surface energy. The resulting change in the contact angle induces rapid liquid transport through the channel by capillary action. In contrast to established plasma treatment this method employs a ground electrode that guides the electric field. This approach enables rapid treatment of select microchannels and thus provides a means of real-time fluid actuation as opposed to simply a pretreatment process. Instantaneous fluid velocities show power-law dependence with time and fit theoretical models at a contact angle of 65°. Average fluid velocities are on the order of 5 cm/s, and thus channels on the order of 1-cm long are filled in ~0.2 s. To demonstrate the potential of this technique for integrated lab-on-a-chip applications, the method was employed in serpentine channel, for on-demand fluid routing, to initiate a mixing process, and through an on-chip integrated microelectrode.     

Robust metric calibration of non-linear camera lens distortion

Camera lens distortion is crucial to obtain the best performance cameral model. Up to now, different techniques exist, which try to minimize the calibration error using different lens distortion models or computing them in different ways. Some compute lens distortion camera parameters in the camera calibration process together with the intrinsic and extrinsic ones. Others isolate the lens distortion calibration without using any template and basing the calibration on the deformation in the image of some features of the objects in the scene, like straight lines or circles. These lens distortion techniques which do not use any calibration template can be unstable if a complete camera lens distortion model is computed. They are named non-metric calibration or self-calibration methods.Traditionally a camera has been always best calibrated if metric calibration is done instead of self-calibration. This paper proposes a metric calibration technique which computes the camera lens distortion isolated from the camera calibration process under stable conditions, independently of the computed lens distortion model or the number of parameters. To make it easier to resolve, this metric technique uses the same calibration template that will be used afterwards for the calibration process. Therefore, the best performance of the camera lens distortion calibration process is achieved, which is transferred directly to the camera calibration process.     

Automatic metro map layout using multicriteria optimization

This paper describes an automatic mechanism for drawing metro maps. We apply multicriteria optimization to find effective placement of stations with a good line layout and to label the map unambiguously. A number of metrics are defined, which are used in a weighted sum to find a fitness value for a layout of the map. A hill climbing optimizer is used to reduce the fitness value, and find improved map layouts. To avoid local minima, we apply clustering techniques to the map-the hill climber moves both stations and clusters when finding improved layouts. We show the method applied to a number of metro maps, and describe an empirical study that provides some quantitative evidence that automatically-drawn metro maps can help users to find routes more efficiently than either published maps or undistorted maps. Moreover, we have found that, in these cases, study subjects indicate a preference for automatically-drawn maps over the alternatives.