Laser-induced fluorescence visualization of ion transport in a pseudo-porous capacitive deionization microstructure

In this paper, a microfluidic experimental set-up is introduced to study the ionic transport in an artificial capacitive deionization (CDI) cell. CDI is a promising desalination technique, which relies on the application of an external electric field and high surface area porous electrodes for ion separation and storage. Photolithography and deep reactive ion etching were used to fabricate a micro-CDI channel with pseudo-porous electrodes on a silicon-on-insulator substrate. Laser-induced fluorescence was performed using cationic Sulforhodamine B (SRB) fluorescent dye to measure ion concentration within the bulk solution and more importantly, within the porous electrodes during the desalination process, with an average normalized root mean square deviation of 8.2 %. Using this set-up, electromigration of ions within the electrode was visualized and the effect of applied electric potential on bulk solution concentration distribution is quantified. In addition, SRB and Fluorescein were used together to visualize anion and cation concentrations simultaneously. The method presented in this study can be used for solution concentrations up to approximately 0.7 mM. The ionic concentration profiles obtained by this approach can be used to test and validate the existing electrosorption models, and pseudo-porous electrodes can be modified to observe the effects of pore size, shape and distribution on electrosorption performance. Furthermore, with proper modifications, the microfabricated structure and experimental set-up can be used for CDI-on-a-chip applications and bio-separation devices.     

Creep and Creep Fracture in Hot-Pressed Alumina

The creep and creep fracture behavior of two hot-pressed aluminas are presented, for both flexural and tensile testing. Steady-state power-law creep is observed with a stress exponent of about 2 for each material. Three distinct fracture regimes are found. At high stress in flexure, fracture occurs by slow crack growth with a high stress dependence of the failure time. At intermediate stresses, in both flexure and tension, creep fracture occurs by multiple microcracking after modest strains. Failure times exhibit a modest stress dependence (stress exponent of 2.5 in tension and 3 in flexure), with a constant failure strain equal to 0.09. The failure times are considerably longer in flexure than in tension, because of the constraint imposed on crack growth by the bending geometry. We conclude that flexure cannot be used for creep lifetime assessment, even in simple, single-phase materials such as Al₂O₃. At low stresses, in tension, failure also exhibits a modest stress dependence but with a much higher failure strain. The material shows the onset of super-plastic behavior.     

Variability for oil and fatty acid composition in castorbean varieties

Thirty-six castorbean varieties were surveyed for oil and fatty acid composition, in order to determine variability of these seed compounds. A large variability of seed oil percentage was observed, ranging from 39.6 to 59.5%. Concerning the fatty acids, little variability was observed for ricinoleic acid, which was the most abundant in the oil, ranging from 83.65 to 90.00%. The other fatty acids appeared in small concentrations and showed a small range: 0.87 to 2.35, 0.68 to 1.84, 2.96 to 5.64, 3.19 to 5.98, and 0.34 to 0.91%, for palmitic, stearic, oleic, linoleic, and linolenic acid, respectively. Non-significant correlations were observed between fatty acids and seed oil percentage. However, significant correlations were observed among fatty acid concentrations: positive and negative ones. These significant correlations could be associated with the biosynthetic pathways of the fatty acids, which are not fully elucidated. They suggest, however, that selection for a particular fatty acid will tend to increase those positively correlated, and decrease those negative ones. Selection and plant breeding techniques could then be applied to modify the oil content of the castorbean seeds, considering the variability observed. For the fatty acid composition, however, the variability was not large enough to make substantial changes in their concentrations by selection procedures. More varieties should be surveyed to find out if such variability is available.     

Model falsification using set‐valued observers for a class of discrete‐time dynamic systems: a coprime factorization approach

This article introduces a new method for model falsification using set‐valued observers, which can be applied to a class of discrete linear time‐invariant dynamic systems with time‐varying model uncertainties. In comparison with previous results, the main advantages of this approach are as follows: The computation of the convex hull of the set‐valued estimates of the state can be avoided under certain circumstances; to guarantee convergence of the set‐valued estimates of the state, the required number of previous steps is at most as large as the number of states of the nominal plant; and it provides a straightforward nonconservative method to falsify uncertain models of dynamic systems, including open‐loop unstable plants. The results obtained are illustrated in simulation, emphasizing the advantages and shortcomings of the suggested method. Copyright © 2013 John Wiley & Sons, Ltd.     

Metabolic behavior in rats of a nonprotein microemulsion resembling low-density lipoprotein

A protein-free microemulsion (LDE) with a lipid composition resembling that of low-density lipoprotein (LDL) was used in metabolic studies in rats to compare LDE with the native lipoprotein. LDE labeled with radioactive lipids was injected into the bloodstream of male Wistar rats, and plasma kinetics of the labeled lipids were followed on plasma samples collected at regular intervals for 12 h after injection. The 24-h LDE uptake by different tissues was also measured in tissue samples excised after the animals had been sacrificed. We found that LDE plasma kinetics were similar to those described for native LDL [fractional clearance rate (FCR) of cholesteryl ester, 0.42±0.11 h⁻¹]. The major site for LDE uptake was the liver, and the tissue distribution of the LDE injected radioactivity was as one would expect for LDL. To test whether LDE was taken up by the specific LDL receptors, the LDE emulsion was injected into rats treated with 17α-ethinylestradiol, which is known to increase the activity of these receptors; as expected, removal of LDE from the bloodstream increased (FCR=0.90±0.35 h⁻¹). On the other hand, saturation of the receptors that remove remnants by prior infusion of massive amounts of lymph chylomicrons did not change LDE plasma kinetics. These results indicate that LDE is cleared from plasma by B,E receptors and not by the E receptors that remove remnants. Incorporation of free cholesterol into LDE increased LDE plasma clearance. Incubation studies also showed that LDE incorporates a variety of apolipoproteins, including apo E, a ligand for recognition of lipoproteins by specific receptors. Our data suggest that LDE can be a useful tool to test LDL metabolism and B,E receptor function.     

Frontline robots in tourism and hospitality: service enhancement or cost reduction?

Electronic Markets - Robots are being implemented in many frontline services, from waiter robots in restaurants to robotic concierges in hotels. A growing number of firms in hospitality and tourism...     

Beyond multi-adjoint logic programming

In ‘multi-adjoint logic programming’, MALP in brief, each fuzzy logic program is associated with its own ‘multi-adjoint lattice’ for modelling truth degrees beyond the simpler case of true and false, where a large set of fuzzy connectives can be defined. On this wide repertoire, it is crucial to connect each implication symbol with a proper conjunction thus conforming constructs of the form (←_i, &_i) called ‘adjoint pairs’, whose use directly affects both declarative and operational semantics of the MALP framework. In this work, we firstly show how the strong dependence of adjoint pairs can be largely weakened for an interesting ‘sub-class’ of MALP programs. Then, we reason in a similar way till conceiving a ‘super-class’ of fuzzy logic programs beyond MALP, which definitively drops out the need for using adjoint pairs, since the new semantics behaviour relies on much more relaxed lattices than multi-adjoint ones.     

Extended Reflexive Ontologies for the Generation of Clinical Recommendations

Decision recommendations are a set of alternative options for clinical decisions (e.g., diagnosis, prognosis, treatment selection, follow-up, and prevention) that are provided to decision makers by knowledge-based Clinical Decision Support Systems (k-CDSS) as aids. We propose to follow a “reasoning over domain” approach for the generation of decision recommendations by gathering and inferring conclusions from production rules. In order to rationalize our approach, we present a specification that will sustain the logic models supported in the knowledge bases we use for persistence. We introduce first the underlying knowledge model and then the necessary extensions that will convey toward the solution of the reported needs. The starting point of our approach is the proposition of Reflexive Ontologies (RO). Here, we go a step further, proposing an extension of RO that includes the handling and reasoning that production rules provide. Our approach speeds up the recommendation generation process.     

Structural design using multi-objective metaheuristics. Comparative study and application to a real-world problem

Many structural design problems in the field of civil engineering are naturally multi-criteria, i.e., they have several conflicting objectives that have to be optimized simultaneously. An example is when we aim to reduce the weight of a structure while enhancing its robustness. There is no a single solution to these types of problems, but rather a set of designs representing trade-offs among the conflicting objectives. This paper focuses on the application of multi-objective metaheuristics to solve two variants of a real-world structural design problem. The goal is to compare a representative set of state-of-the-art multi-objective metaheuristic algorithms aiming to provide civil engineers with hints as to what optimization techniques to use when facing similar problems as those selected in the study presented in this paper. Accordingly, our study reveals that MOCell, a cellular genetic algorithm, provides the best overall performance, while NSGA-II, the de facto standard multi-objective metaheuristic technique, also demonstrates a competitive behavior.