Electroconductive Biohybrid Collagen/Pristine Graphene Composite Biomaterials with Enhanced Biological Activity

Electroconductive substrates are emerging as promising functional materials for biomedical applications. Here, the development of biohybrids of collagen and pristine graphene that effectively harness both the biofunctionality of the protein component and the increased stiffness and enhanced electrical conductivity (matching native cardiac tissue) obtainable with pristine graphene is reported. As well as improving substrate physical properties, the addition of pristine graphene also enhances human cardiac fibroblast growth while simultaneously inhibiting bacterial attachment (Staphylococcus aureus). When embryonic‐stem‐cell‐derived cardiomyocytes (ESC‐CMs) are cultured on the substrates, biohybrids containing 32 wt% graphene significantly increase metabolic activity and cross‐striated sarcomeric structures, indicative of the improved substrate suitability. By then applying electrical stimulation to these conductive biohybrid substrates, an enhancement of the alignment and maturation of the ESC‐CMs is achieved. While this in vitro work has clearly shown the potential of these materials to be translated for cardiac applications, it is proposed that these graphene‐based biohybrid platforms have potential for a myriad of other applications—particularly in electrically sensitive tissues, such as neural and neural and musculoskeletal tissues.     

Engineering magnetic nanostructures with inverse hysteresis loops

Top-down lithography techniques allow the fabrication of nanostructured elements with novel spin configurations,which provide a new route to engineer and manipulate the magnetic response of sensors and electronic devices and understand the role of fundamental interactions in materials science.In this study, shallow nanostructure-pattemed thin films were designed to present inverse magnetization curves,i.e.,an anomalous magnetic mechanism characterized by a negative coercivity and negative remanence.This procedure involved a method for manipulating the spin configuration that yielded a negative coercivity after the patterning of a single material layer.Patterned NiFe thin films with trench depths between 15％-25％ of the total film thickness exhibited inverse hysteresis loops for a wide angular range of the applied field and the trench axis.A model based on two exchange-coupled subsystems accounts for the experimental results and thus predicts the conditions for the appearance of this magnetic behavior.The findings of the study not only advance our understanding of patterning effects and confined magnetic systems but also enable the local design and control of the magnetic response of thin materials with potential use in sensor engineering.     

Integration of microfiltration and nanofiltration to promote textile effluent reuse

This study investigates the application of a hybrid microfiltration–nanofiltration (MF–NF) process for textile wastewater reclamation. Indigo blue dye was efficiently retained by an MF membrane, allowing its recovery from the concentrated stream. NF technology was successfully applied to polish textile effluent. The NF membrane was evaluated under different transmembrane pressure (8–15 bars), crossflow velocities (0.21–0.84 cm s^?1), pH (7–11), and feed temperature (20–40 °C). The best NF performance was provided at a pressure of 12 bar and a crossflow rate of 0.63 cm s^?1. The NF performance (in terms of COD, conductivity, colour, and nitrogen removal) was not influenced by pH; however, higher feed pH values resulted in increased membrane fouling. The principal cause of flux decline was due to concentration polarization. Membrane chemical cleaning was sufficient to regain the initial permeability. The NF permeate met the quality requirements for all water demands within the textile industry, while the NF concentrate could be used to wash equipment, print work screens, print paste containers, and floors. The total capital cost (CapEx) of the MF–NF system was estimated at 58,362.50 US dollars and the total operational cost (OpEx) at 0.31 US dollars per cubic metre of effluent.     

The axial dispersion of liquid solutions and solid suspensions in planar oscillatory flow crystallizers

The planar oscillatory flow crystallizer (planar-OFC) was designed with a rectangular cross-section to improve the flow and suspension of solids of conventional OFCs. Residence time distribution experiments with liquid and solid tracers were performed to assess the effect of the net flow rate, Q , the frequency, f , and the amplitude of oscillation, x₀ , on the axial dispersion of liquids, , and solids, , in three planar-OFCs with different geometries. It was found that Q and f have in general positive effects on and , and x₀ has negative effects. Furthermore, identical values of and were obtained in each crystallizer. It was also found that the interaction between Q and x₀ is the most significant one in all systems. These results show that the three crystallizers have similar axial dispersion performances with liquids and solids. This is of paramount importance for multiphase systems such as crystallization.     

Effect of alkaline extraction on the structure of the protein of quinoa (Chenopodium quinoa Willd.) and its influence on film formation

It is important to produce hydrophobic edible protein films for use in foods. The aim of this study was to evaluate the effect of alkaline extraction of quinoa proteins (QP) on the structure and their film‐forming ability without plasticiser. QP were extracted between pH 8 to 12, and their structure was evaluated by PAGE‐SDS, size‐exclusion HPLC light scattering, fluorescence spectroscopy and SH and SS. Film was characterised by FTIR, SEM, tensile strength, barrier and colour. Structural changes of QP showing that alkalinisation over pH 10 produce significant denaturation/aggregation/dissociation structural changes in QP. pH 12 was the condition to form a film (film₁₂). FTIR showed hydrogen bonds and hydrophobic film interactions. Film₁₂ had 16.6 ± 3.8% elongation and 15.7 ± 1.1 MPa tensile strength, and water vapour permeability was 5.18 ± 0.38 g mm m^?2 day^?1 kPa^?1. Film₁₂ had a brownish colour. A high degree of denaturation/aggregation/dissociation of QP structure is required to form a film without plasticiser.     

Changes on the levels of serotonin precursors – tryptophan and 5-hydroxytryptophan – during roasting of Arabica and Robusta coffee

The levels of free and total tryptophan and of 5-hydroxytryptophan (5-HTP) were investigated in green and roasted grains and beverages of Coffea arabica L. (Arabica) and Coffea canephora Pierre var. robusta (Robusta). Grains were light, medium and dark roasted. Free and protein tryptophan were extracted before and after hydrolysis. The levels of tryptophan and 5-HTP were quantified simultaneously by ion-pair HPLC and fluorimetric detection after derivatisation with o-phthalaldehyde. Robusta green coffee had higher total and protein tryptophan, whereas Arabica had higher free tryptophan levels. 5-HTP was not detected in the samples before and after roasting. Free tryptophan was completely degraded during roasting. Roasting significantly affected protein tryptophan. The rate of loss was smaller in Arabica compared to Robusta at every roasting degree. A beverage prepared the Brazilian way with a medium-roasted coffee provided 1.4–2.5 mg tryptophan/50 ml cup.     

Partial characterization of protease from a thermophilic fungus, Thermoascus aurantiacus, and its hydrolytic activity on bovine casein

Proteases are one of the most important groups of industrial enzymes, with considerable application in the food industry. The aim of this work was to study a novel protease produced by the thermophilic fungus, Thermoascus aurantiacus, through solid-state fermentation (SSF). The enzyme acted optimally at pH 5.5 and 60 °C; it was stable up to 60 °C for 1 h and in the pH range 3.0–9.5. To elucidate the enzyme’s proteolytic activity, its hydrolytic profile on bovine casein, an important protein in the food industry, was studied by enzymatic hydrolysis on skim milk, analyzed by gel electrophoresis (UREA-PAGE), which clearly showed that the protease does not have the same specificity as bovine chymosin.     

Quantification of bone mass gain in response to the application of biphasic bioceramics and platelet concentrate in critical-size bone defects

Biphasic bioceramics have been widely indicated for bone reconstruction; however, the real gain in bone mass due to the presence of such biomaterials has not been established yet nor the advantages of its association with platelet concentrate. This study aims at quantifying the volume of bone matrix, osteoblasts, osteocytes, blood vessels and adipose tissue after the application of a biphasic bioceramics composed of 65% hydroxyapatite and 35% β-tricalcium phosphate. Critical-size bone defects were produced in rabbit femora and reconstructed with bioceramics only, with bioceramics combined with platelet concentrate, with platelet concentrate alone, and with no treatment (blood clot). The quantitative evaluation was performed on histological sections using histomorphometry. Our data provide original evidence that consolidates the indication of bioceramics for clinical bone loss reconstruction. The application of biphasic bioceramics alone led to major bone mass gain and was followed by its association with platelet concentrate. On the other hand, platelet concentrate can contribute to the augmentation and maintenance of the adipose tissue, representing a new field for future applications in plastic surgery.     

Malnutrition prevalence and precision in nutritional care differed in relation to hospital volume – a cross-sectional survey

Background  

To explore the point prevalence of the risk of malnutrition and the targeting of nutritional interventions in relation to undernutrition risk and hospital volume.