Evaluation of a fast neutron coincidence counter for the measurements of uranium samples

A fast neutron coincidence counter using BC454/BGO phoswich detectors has been evaluated for the purpose of rapid verification measurements of uranium items. This counter uses custom electronics to identify and count coincidence neutrons in the presence of background radiation. Measurements of uranium standards were performed to evaluate the counter. This counter is successful in measuring uranium items but has a low efficiency that results in minimal improvement over current technology. An optimized counter can be built with better performance capabilities, but it is recommended that newer technologies be used instead.     

Electrospinning of gelatin fibers using solutions with low acetic acid concentration: Effect of solvent composition on both diameter of electrospun fibers and cytotoxicity

Gelatin fibers were prepared by electrospinning of gelatin/acetic acid/water ternary mixtures with the aim of studying the feasibility of fabricating gelatin nanofiber mats at room temperature using an alternative benign solvent by significantly reducing the acetic acid concentration. The results showed that gelatin nanofibers can be optimally electrospun with low acetic acid concentration (25%, v/v) combined with gelatin concentrations higher than 300 mg/mL. Both gelatin solutions and electrospun gelatin mats (prepared with different acetic acid aqueous solutions) were analyzed by Fourier transform infrared spectroscopy and differential scanning calorimetry techniques to determine the chemical and structural changes of the polymer. The electrospun gelatin mats fabricated from solutions with low acetic acid content showed some advantages as the maintenance of the decomposition temperature of the pure gelatin (～ 230°C) and the reduction of the acid content on electrospun mats, which allowed to reach a cell viability upper than 90% (analyzed by cell viability test using human dermal fibroblast and embryonic kidney cells). This study has also analyzed the influence of gelatin and acetic acid concentration both on the solution viscosity and the electrospun fiber diameter, obtaining a clear relationship between these parameters. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42115.     

Biofilm formation capacity of Listeria monocytogens strains isolated from soft cheese from Costa Rica

Listeria monocytogenes is a bacteria associated with the production of severe infectious disease in human being, but also with the formation of biofilms in different surfaces related to the food production environment. Biofilm represents a serious problem in food industry, since it is a constant and important contamination source and also, bacteria present in it have an increased resistance towards physical and chemical agents of common use. The capacity of biofilm formation of L. monocytogenes strains previously isolated from soft cheese samples from Costa Rica was studied under different temperature and culture conditions. The microplate technique was performed using different culture media (BHIB, TSB 1:20 and cheese serum) and at different incubation temperatures (refrigeration, environmental and 35 degrees C). Biofilm formation capacity was classified according to the optical density obtained at 620 nm. None of the strains evaluated was classified as strong biofilm former under any of the variables studied, nevertheless, weak and moderate formers were detected. The results obtained show the influence of the nutrient content of the culture media used over biofilm formation; BHIB was the only culture media that allowed the expression of moderate biofilm forms, contrary to cheese serum that did not promote biofilm production. Biofilm formation is a multifactorial process, where adsorption level depends on several variables and its study must be promoted in order to develop methodologies that allow its reduction or elimination, so food industries may offer safe food products to consumers.     

Electrochemical study of platinum deposited by electron beam evaporation for application as fuel cell electrodes

Platinum is the most used catalyst in electrodes for fuel cells due to its high catalytic activity. Polymer electrolyte and direct methanol fuel cells usually include Pt as catalyst in their electrodes. In order to diminish the cost of such electrodes, different Pt deposition methods that permit lowering the metal load whilst maintaining their electroactivity, are being investigated. In this work, the behaviour of electron beam Pt (e-beam Pt) deposited electrodes for fuel cells is studied. Three different Pt loadings have been investigated. The electrochemical behaviour by cyclic voltammetry in H₂SO₄, HClO₄ and in HClO₄ + MeOH before and after the Pt deposition on carbon cloth has been analysed. The Pt improves the electrochemical properties of the carbon support used. The electrochemical performance of e-beam Pt deposited electrodes was finally studied in a single direct methanol fuel cell (DMFC) and the obtained results indicate that this is a promising and adequate method to prepare fuel cell electrodes.     

Quality assessment of dehydrated red bell pepper using tempering drying cycles

Quality assessment of red bell pepper dices preserved through batch dehydration introducing tempering cycles were performed in this work. The parameters considered were: the percentages of ascorbic acid and final antioxidant activity retention, as well as the influence of calcium chloride on diffusivity and colour values. Although, a similar final moisture content was reached through different red bell pepper dehydration processes, but the one with tempering cycles had better qualities than those without tempering. Ascorbic acid and final antioxidant activity retention showed higher values and so were colour intensities compared to control samples in all cases. In respect to the effective diffusivity coefficients, there was an increment as the calcium chloride concentration increased. As of the treatments with tempering cycles, the best scheme was 15 min drying time and 30 min tempering time at 60 °C.     

Comparison of sequential compression devices and foot pumps for prophylaxis of deep venous thrombosis in high-risk trauma patients

Multiple-trauma patients are at increased risk for deep venous thrombosis (DVT) but are also at increased risk of bleeding, and the use of heparin may be contraindicated. Sequential pneumatic compression devices (SCDs) are an alternative for DVT prophylaxis. However, lower extremity fracture or soft tissue injury may preclude their use. In these circumstances, foot pumps (FPs) are often substituted, yet little clinical data exist to support their use. We identified 184 consecutive high-risk trauma patients who received DVT prophylaxis with compression devices. We reviewed demographic data, mechanism of injury, Injury Severity Score, injury pattern, and method of prophylaxis. Generally, SCDs were preferred, but FPs were substituted in patients with lower extremity injuries. Occurrences of DVT or pulmonary embolism were also noted. Patients surviving less than 48 hours were excluded. SCDs were used in 118 patients (64%) and FPs in 66 patients (34%). There were no differences in age, Injury Severity Score, or presence of shock on admission. As expected, FP patients were more likely to have lower extremity fractures (65 vs 26%; P < 0.05) and were also more likely to have associated pelvic fracture (59 vs 25%; P < 0.05) and chest injury (61 vs 26%, P < 0.05). There was no difference in the incidence of head injury, although SCD patients had more severe head injuries (Glasgow Coma Score, 7.9 vs 10.5; P < 0.05). The overall incidence of DVT was 5.4 per cent (10 of 184), with no differences between the two groups (SCD 7% vs FP 3%). Three patients had a pulmonary embolism (FP, two; SCD, one), none of which were fatal. Compression devices provide adequate DVT prophylaxis with a low failure rate (3-8%) and no device-related complications. FPs appear to be a reasonable alternative in the high-risk trauma patient when lower extremity fractures precludes use of SCD.     

A Direct Solver for 2D Non-Stationary Boltzmann-Poisson Systems for Semiconductor Devices: A MESFET Simulation by WENO-Boltzmann Schemes

We present preliminary results of a high order WENO scheme applied to deterministic computations for two dimensional formulation of the transients for the Boltzmann-Poisson system describing electron transport in semiconductor devices. The collisional term models optical-phonon interactions which become dominant under strong energetic conditions corresponding to nanoscale active regions under applied bias. We treat the Boltzmann Transport equation in a spherical coordinate system for the wave-vector space. The problem is three dimensional in the wave-vector space and two dimensional in the physical space, plus the time variable driving to steady states. The new formulation avoids the singularity due to the spherical coordinate system.     

Synthesis of planar inductors in low temperature co-fired ceramic technology

A simple bisection algorithm for the synthesis of planar inductors using a fast electromagnetic analysis algorithm is presented in this work. Both bisection and electromagnetic analysis algorithms are based on a set of heuristic and physical rules obtained from the study of the electromagnetic behavior of these planar devices. With this procedure, the benefits are two fold: (i) the number of iterations is kept moderately low in the synthesis loop, and (ii) the analysis at each iteration step is speed up without compromising accuracy. The algorithm is applied to the development of an inductor library for a low temperature co-fired ceramic process technology.     

Bifunctional Squaramide Catalysts with the Same Absolute Chirality for the Diastereodivergent Access to Densely Functionalised Cyclohexanes through Enantioselective Domino Reactions. Synthesis and Mechanistic Studies

We have developed a procedure for the stereoselective and diastereodivergent synthesis of densely functionalised cyclohexanes containing four stereocentres through an asymmetric Michael‐initiated ring closure (MIRC) cascade reaction employing hydrogen‐bond catalysis, which is able to prepare adducts with different absolute configurations starting from the same starting materials. The overall process involves a highly diastereo‐ and enantioselective Michael/Henry cascade reaction between a wide range of nitroalkenes and α‐nitro‐δ‐oxo esters, allowing access to different diastereoisomers of the final adduct by introducing subtle changes in the general (R,R)‐configured bifunctional tertiary amine/squaramide catalyst structure. Moreover, this methodology is also amenable to a three‐component one‐pot procedure, leading to the formation of the same adducts with very good results directly from commercially available reagents, on a multigram scale, and employing a very low catalyst loading. Furthermore, a detailed experimental and computational study is described which shows the origin of the diastereodivergent behaviour of these structurally similar catalysts and the nature of the substrate–catalyst interaction.