Pulsed Eddy Current Data Analysis for the Characterization of the Second-Layer Discontinuities

Acoustic emission (AE) was applied for detection of microcrack initiation in carbon fiber reinforced polymer composites subjected to shear stresses. Experimental materials were prepared from polyester bonded unidirectional (1D) non-crimp fabric and 2D plain-weave carbon fiber fabrics, using the resin transfer moulding technology. Control of epoxy resin/carbon textile proportions enabled variation of fiber volume content from small (34/35% for 2D/1D), through medium (51%) to high (68%). Rectangular samples (\(45 \times 4 \times 2\)  mm) were cut from 1D plates along [0] and across [90] fibers. Similar size samples from 2D plates were cut along warp/weft axes as well as in two orthogonal bias directions. Selected side surfaces were polished for microscopic (SEM) observations. Short-beam-strength tests were performed in 3-point bending (l/h\(=\)4), with two AE sensors attached for damage monitoring, which allowed to interrupt loading sequence before final failure. The acoustic emission historic index was the most effective AE parameter in damage initiation control. Microcracks developing on polished composite side-surfaces were observed under the SEM and direct microscopic evidence confirmed fiber debonding to be the principal mechanism of crack initiation in these materials and testing conditions before any further damage.     

A statistical approach to lexical stress assignment for TTS synthesis

Lexical stress is primarily important to generate a correct pronunciation of words in many languages; hence its correct placement is a major task in prosody prediction and generation for high-quality TTS (text-to-speech) synthesis systems. This paper proposes a statistical approach to lexical stress assignment for TTS synthesis in Romanian. The method is essentially based on n-gram language models at character level, and uses a modified Katz backoff smoothing technique to solve the problem of data sparseness during training. Monosyllabic words are considered as not carrying stress, and are separated by an automatic syllabification algorithm. A maximum accuracy of 99.11% was obtained on a test corpus of about 47,000 words.     

A high-order integral algorithm for highly singular PDE solutions in Lipschitz domains

We present a new algorithm, based on integral equation formulations, for the solution of constant-coefficient elliptic partial differential equations (PDE) in closed two-dimensional domains with non-smooth boundaries; we focus on cases in which the integral-equation solutions as well as physically meaningful quantities (such as, stresses, electric/magnetic fields, etc.) tend to infinity at singular boundary points (corners). While, for simplicity, we restrict our discussion to integral equations associated with the Neumann problem for the Laplace equation, the proposed methodology applies to integral equations arising from other types of PDEs, including the Helmholtz, Maxwell, and linear elasticity equations. Our numerical results demonstrate excellent convergence as discretizations are refined, even around singular points at which solutions tend to infinity. We demonstrate the efficacy of this algorithm through applications to solution of Neumann problems for the Laplace operator over a variety of domains—including domains containing extremely sharp concave and convex corners, with angles as small as π/100 and as large as 199π/100.     

The Design, Performance, and Use of DiPerF: An automated DIstributed PERformance evaluation Framework

We present DiPerF, a DIstributed PERformance evaluation Framework, aimed at simplifying and automating performance evaluation of networked services. DiPerF coordinates a pool of machines that access a target service and collect performance measurements, aggregates these measurements, and generates performance statistics. The aggregate data collected provide information on service throughput, service response time, service ‘fairness’ when serving multiple clients concurrently, and on the impact of network connectivity on service performance. We have used DiPerF in various environments (PlanetLab, Grid3, TeraGrid, and a cluster) and with a large number of services. This paper provides data that demonstrates that DiPerF is accurate: The aggregate client view matches the tested service view within a few percents, and scalable: DiPerF can handle more than 10,000 clients and 100,000 transactions per second. Moreover, rapid adoption and extensive use demonstrate that the ability to automate performance characteristics extraction makes DiPerF a valuable tool.     

Imprinted poly (vinyl alcohol) as a promising tool for xanthine derivatives separation

In this work, we report the obtaining of an ecological imprinted polymer for the selective sorption of xanthine derivatives (caffeine and theobromine) from aqueous solutions, through an innovative approach. Poly (vinyl alcohol) [PVA]‐xanthine films have been obtained by aqueous solution casting. PVA crosslinking has been performed by using glutaraldehyde in gaseous phase. Template elimination has been achieved by “washing” of crosslinked films with water. To check the polymer imprentation and to determine the imprinted material effectiveness in xanthines separation, sorption studies have been performed. Freundlich, Langmuir, BET, Extended Langmuir models, and Scatchard analysis have been applied on the experimental data to better characterize the sorption mechanism. Fluorescence microscopy has been proposed as suitable method to check the imprentation level of the polymer. The information obtained by this method is in good agreement with the values for the efficiency of the imprinted polymer and could serve as an easier tool for prediction of the imprinted polymers performance. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci 122:2081–2089, 2011     

Ultrasonic preparation of mesoporous silica using pyridinium ionic liquid

Mesoporous silica matrices have been prepared via classic acid catalyzed and sono-catalyzed sol-gel routes. Tetramethoxysilan (TMOS) and methyl-trimethoxysilane (MTMS) were used as silica precursors, and N-butyl-3-methylpyridinium tetrafluoroborate ([bmPy][BF₄]) was employed as co-solvent and pore template. The ionic liquid (IL) to silica mole ratio was varied between 0.007 and 0.07. Nitrogen adsorption-desorption and small-angle neutron scattering measurements were used to characterize the obtained materials. The ionic liquid played the role of catalyst that affected the formation of the primary xerogel particles, and changed the porosity of the materials. Ultrasound treatment resulted in microstructure change on the level of the colloid particle aggregates. In comparison with IL containing xerogels, the IL containing sonogels show increased pore diameter, bigger pore volumes and diminished surface areas.     

Piezoelectric BNT-BT<Subscript>0.11</Subscript> thin films processed by sol–gel technique

0.89(Na_0.5Bi_0.5)TiO₃–0.11BaTiO₃, (BNT-BT_0.11) thin film was fabricated by sol–gel/spin coating process, on platinized silicon wafer. Perovskite structure with random orientation of crystallites has been obtained at 700 °C. Piezoelectric activity of BNT-BT_0.11 thin film was detected using piezoresponse force microscopy (PFM). Effective piezoelectric coefficient d _33eff of such film, recorded at 5 V applied dc voltage, was ~29 pm/V, which is similar to other BNT-BT _x thin films. The complex refractive index and dielectric function of BNT-BT_0.11 thin films were also investigated. The high leakage current density significantly influences the dielectric, ferroelectric, and piezoelectric properties of the BNT-BT_0.11 films.     

Ni(2+) and H(2)PO(4)(-) uptake properties of compounds in the CaTiO(3)-CaFeO(2.5) system

A batch method was used to investigate the uptake of heavy metal cations and anions by the compounds in the CaTiO(3)-CaFeO(2.5) system, in which a series of oxygen vacancies was systematically introduced into a perovskite structure as the x-value of Ca(Fe(x)Ti(1-x))O(3-x/2) was increased. Samples of CaTiO(3), CaFe(0.1)Ti(0.9)O(2.95), CaFe(0.5)Ti(0.5)O(2.75), CaFe(0.67)Ti(0.33)O(2.67) and CaFeO(2.5) were prepared by solid mixing (SM), co-precipitation (CP) and gel evaporation (GE) methods. The resulting samples were calcined at temperatures between 400 and 1000 °C. The target crystalline phases differed according to the preparation method, but in most cases were formed at 700-800 °C. The Ni(2+) sorption isotherms of all the samples were fitted better by the Langmuir model than by the Freundlich model, while in the case of H(2)PO(4)(-) sorption isotherms, these were better fitted by the latter model. The uptake ability increased with increasing x value of the samples. The maximum values for the saturated sorption of Ni(2+) (Q(0)(Ni(2+)) = 2.83 mmol/g) and H(2)PO(4)(-) (K(F)(H(2)PO(4)(-)) = 2.95 mmol/g) were achieved for x = 1 (i.e. CaFeO(2.5)) sample.     

Bayesian calculation of methotrexate clearance after low dose intramuscular administration in patients with rheumatoid arthritis

OBJECTIVE: To determine a pharmacokinetic procedure (Bayesian method) for estimation of methotrexate (MTX) clearance, using only 2 blood samples, in outpatients with rheumatoid arthritis treated with low dose intramuscular (i.m.) MTX. METHODS: Population pharmacokinetic parameters were obtained by the weighted least squares (WLSQ) method in plasma samples from 14 patients with rheumatoid arthritis (RA). In each patient, 11 samples were measured by fluorescence polarization immunoassay, at Time 0, 0.25, 0.5, 0.75, 1, 2, 4, 6, 8, 12, and 24 h after i.m. administration. These measures were validated by pharmacokinetic studies in 20 other patients with RA. Individual total body clearance of MTX was calculated using only 2 plasma samples (at 0.5 and 2 h after i.m. injection) by the Bayesian method using the population pharmacokinetic parameters. The clearance measures obtained by the Bayesian method were compared with those obtained by the WLSQ method. RESULTS: The pharmacokinetic variables (clearance, half-life, area under the curve) of 14 patients were determined, as well as the covariance and the mean values necessary to apply the Bayesian method. No significant difference was found between clearance values obtained by the Bayesian method compared to the WLSQ method, confirming the validity of the Bayesian values. CONCLUSION: The present population pharmacokinetic parameters allowed the determination of individual clearance of MTX with only 2 plasma samples (0.5 and 2 h after administration) in patients treated with low dose im MTX. Individual clearance is used to modulate MTX administration in patients presenting adverse reactions in spite of good clinical response. Individual determination of MTX pharmacokinetics in patients at risk for adverse MTX reactions could be useful for adjustment of the drug regimen.     

Thermal Behavior of Isotactic Poly(propylene)/Maleated Poly(propylene) Blends

This paper analyzes the thermal and thermo‐oxidative degradation behavior, phase separation, melting, and crystallization of blends consisting of isotactic poly(propylene) (IPP) and poly(propylene) grafted with maleic anhydride (PP‐g‐MA). It has been established that, depending on the blend composition and crystallization/preparation procedure, the blends of IPP and PP‐g‐MA can either co‐crystallize or evidence phase separation. This conclusion has been attained by comparing the DSC results of crystallization under dynamic and isothermal conditions with X‐ray diffraction results. On the basis of the obtained results, the optimum mixing ratios have been established as 95–85 wt.‐% IPP/5–15 wt.‐% PP‐g‐MA. Thermo‐oxidative behavior has been studied by thermogravimetry and differential thermal analysis.