Intergranular Oxidation of Nickel-Base Alloys: Potentialities of Focused Ion Beam Tomography

Oxidation of Metals - The present work focuses on the intergranular oxidation of Alloy 600 and its weld material Alloy 82 after exposure in simulated primary water at 340–360 °C...     

Membrane treatment of side-stream cooling tower water for reduction of water usage

A pilot study was conducted to determine whether membrane treatment on a side stream of recirculating cooling-tower water could reduce overall water usage and discharge. The treated permeate was returned to the cooling tower while the concentrate was discharged to the sanitary sewer. Flow rates, pressures and water chemistry were monitored. The pilot demonstrated potential substantial water savings. Maximum make-up water and discharge reduction were 16% and 49%, respectively. As high as possible permeate recovery is needed to maximize water conservation. Silica scaling on the membranes limited water savings in this pilot. Development of membranes with a solute-rejection capacity less than the 92% average of the membranes used in the pilot would assist in optimizing water savings. Decreased water outlays compensated for the additional energy used by membrane treatment. Scaling control is critical for economic operation.     

Electrosynthesis of hierarchical Cu2O–Cu(OH)2 nanodendrites supported on carbon nanofibers/poly(para-phenylenediamine) nanocomposite as high-efficiency catalysts for methanol electrooxidation

The development of highly efficient catalysts using inexpensive and earth-abundant metals is a crucial factor in a large-scale commercialization of direct methanol fuel cells (DMFCs). In this study, we explored a new catalyst based on copper nanodendrites (CuNDs) supported on carbon nanofibers/poly (para-phenylenediamine) (CNF/PpPD) nanocomposite for methanol oxidation reaction (MOR). The catalyst support was prepared on a carbon paste electrode by electropolymerization of para-phenylenediamine monomer on a drop-cast carbon nanofibers network. Afterwards, CuNDs were electrodeposited on the nanocomposite through a potentiostatic method. The morphology and the structure of the prepared nanomaterials were characterized by transmission electron microscope, scanning electron microscope, energy dispersive X-ray, X-ray diffraction, and X-ray photoelectron spectroscope. The results suggested that a three-dimensional nanodendritic structure consisting of Cu₂O and Cu(OH)₂ formed on the hybrid CNF/PpPD nanocomposite. The catalytic performance of CuNDs supported on CNF, PpPD and CNF/PpPD was evaluated for MOR under alkaline conditions. The CNF/PpPD/CuNDs exhibits a highest activity (50 mA cm^?2) and stability toward MOR over 6 h, with respect to CNF/CuNDs (40 mA cm^?2) and PpPD/CuNDs (36 mA cm^?2). This inexpensive catalyst with high catalytic activity and stability is a promising anode catalyst for alkaline DMFC applications.     

Sources and Bioactive Properties of Conjugated Dietary Fatty Acids

The group of conjugated fatty acids known as conjugated linoleic acid (CLA) isomers have been extensively studied with regard to their bioactive potential in treating some of the most prominent human health malignancies. However, CLA isomers are not the only group of potentially bioactive conjugated fatty acids currently undergoing study. In this regard, isomers of conjugated α‐linolenic acid, conjugated nonadecadienoic acid and conjugated eicosapentaenoic acid, to name but a few, have undergone experimental assessment. These studies have indicated many of these conjugated fatty acid isomers commonly possess anti‐carcinogenic, anti‐adipogenic, anti‐inflammatory and immune modulating properties, a number of which will be discussed in this review. The mechanisms through which these bioactivities are mediated have not yet been fully elucidated. However, existing evidence indicates that these fatty acids may play a role in modulating the expression of several oncogenes, cell cycle regulators, and genes associated with energy metabolism. Despite such bioactive potential, interest in these conjugated fatty acids has remained low relative to the CLA isomers. This may be partly attributed to the relatively recent emergence of these fatty acids as bioactives, but also due to a lack of awareness regarding sources from which they can be produced. In this review, we will also highlight the common sources of these conjugated fatty acids, including plants, algae, microbes and chemosynthesis.     

Inactivation efficacy of plasma-activated water: influence of plasma treatment time,exposure time and bacterial species

This study aimed to evaluate the influence of plasma treatment time, bacterial exposure time to PAW and bacterial species on the inactivation efficacy of plasma-activated water (PAW), with additional investigation of the inactivation mechanisms of PAW. Six bacterial species, including Listeria innocua, Staphyloccus aureus, Escherichia coli, Pseudomonas fluorescens, Shewanella putrefaciens and Aeromonas hydrophila were selected as the representative bacteria. The initial bacterial concentration was around 7 log CFU ml⁻¹ after mixing with PAW, and the inactivation efficacy was measured after different exposure times during the 4 °C storage. Scanning electron microscopy (SEM) images of the bacteria after PAW treatment were carried out to inspect the cell structure damage, and physicochemical properties of PAW, including pH, conductivity and long-living reactive species of H₂O₂, , and , were examined. The results showed that the inactivation efficacy of PAW was positively correlated with plasma treatment time and bacterial exposure time, and for the species examined in this study, the Gram-negative species were more sensitive to PAW than the Gram-positive species. Cell structure damage, including shrinkage, distortion, or holes, was observed after PAW treatment. The pH of PAW was acidified to 2.5–2.9, and conductivity was significantly increased to 518.0 μs cm⁻¹. and H₂O₂ were reduced during the 48 h storage, while an increased concentration was observed for . This study demonstrated that the processing parameters of plasma treatment time, exposure time and characteristics of bacteria can significantly affect the inactivation efficacy of PAW.     

Nisin as a Food Preservative: Part 1: Physicochemical Properties,Antimicrobial Activity,and Main Uses

Nisin is a natural preservative for many food products. This bacteriocin is mainly used in dairy and meat products. Nisin inhibits pathogenic food borne bacteria such as Listeria monocytogenes and many other Gram-positive food spoilage microorganisms. Nisin can be used alone or in combination with other preservatives or also with several physical treatments. This paper reviews physicochemical and biological properties of nisin, the main factors affecting its antimicrobial effectiveness, and its food applications as an additive directly incorporated into food matrices.