Investigation into etching mechanism of polyethylene terephthalate (PET) films treated in helium and oxygenated‐helium atmospheric plasmas

This research makes an investigation into the etching mechanism of atmospheric plasma conditions on the surface of polyethylene terephthalate (PET) films. Two types of untreated PET films (S/200 and S/500) were exposed to plasma for 0 to 5.0 min in 30‐s increments. The first set of each film type was treated in helium plasma, while the second was treated in oxygenated‐helium plasma. Differential Scanning Calorimetry (DSC) was used to characterize pre‐ and post‐exposure films. Weight changes and the degree of solubility were also determined. Based on peak area results, the percent crystallinity of PET S/200 increased by an average of 4.57% (helium treated) and 13.56% (oxygenated‐helium treated), while the S/500 showed only a small increase. There was no significant change in the melting or crystallization temperatures of either film type, indicating a decrease in amorphous content versus an increase in crystalline material. Weight loss analysis supports this theory. Solubility testing revealed a continual decrease in swelling as exposure time was increased. A model was developed to predict the change in the degree of solubility for polyphase surfaces considering the etching rate per phase. The model was applied to PET with good correlation between the model and experimental data. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2383–2389, 2004     

Characterisation and tribological evaluation of nitrogen-containing molybdenum–copper PVD metallic nanocomposite films

This paper reports on the structural, mechanical and tribological properties of molybdenum–copper nanocomposite films ‘doped’ with small amounts of nitrogen, which contain either no nitride phase (i.e. the nitrogen is held in interstitial solid solution, mainly in molybdenum) or small amounts of lower nitrides (i.e. Mo₂N). All films were deposited on Si wafers, AISI M2 high speed steel and AISI 316 stainless steel by reactive sputtering using a hot-filament-enhanced dc unbalanced magnetron system. A systematic approach was adopted to investigate the evolution of metal/metal and ceramic/metal phase combinations with increasing nitrogen content (up to 40 at.% N) in the film. Coating composition and microstructure were determined by cross-sectional TEM, SEM and XPS. XRD was used to identify (where possible) metallic and metal-nitride phases. Mechanical properties such as hardness and elastic modulus were determined by low load Knoop and instrumented Vickers indentation measurements. Reciprocating sliding, micro-abrasion and impact tests were performed to assess tribological performance.

It was found that increasing the nitrogen gas flow rate from 0 to 15 sccm (and therefore nitrogen content in the film from 0 to 24 at.% N), refined significantly the coating microstructure from columnar to a dense and more equiaxed morphology, increasing the hardness whilst maintaining (almost constant) elastic modulus values, close to that of molybdenum metal. Further increases in the nitrogen gas flow rate resulted in films that appeared to contain significant fractions of the Mo₂N ceramic phase. SEM and cross-sectional TEM analyses of the film deposited at a nitrogen flow rate of 20 sccm (containing 36 at.% N) demonstrated a microstructure consisting of 50–100 nm wide columns, which contain small regions of contrast in dark-field images, of the order of 3–5 nm wide. A maximum hardness of 32 GPa and the highest hardness/modulus ratio was however found in the (predominantly metallic) film deposited at a nitrogen gas flow rate of 15 sccm. This film also performed best in both micro-abrasion and impact wear tests; in contrast, the ‘ceramic’ film (deposited at 20 sccm nitrogen flow rate) performed better in reciprocating sliding wear.     

High-temperature oxidation of a rapidly solidified amorphous Ta-Ir alloy

The oxidation products formed at 500 and 700°C on an amorphous Ta-44.5 at% Ir alloy in an Ar-0.1% O₂ gas mixture were characterized using SEM, XRD, EPMA, TEM, STEM, AES, and XPS. Initially, a thin (3–4 nm) layer of Ta₂O₅ formed at the surface of the alloy. Continued growth of the Ta₂O₅, which occurred very rapidly, involved diffusion of oxygen anions from the Ta₂O₅/gas interface to the alloy/Ta₂O₅ interface, where tantalum was selectively oxidized. Because the oxide grew more quickly than iridium could diffuse back into the alloy, the iridium coalesced into platelets of crystalline iridium-rich alloy that were oriented approximately parallel to the oxide/alloy interface, and which became embedded in a matrix of Ta₂O₅. The unoxidized core remained in the glassy state. The oxidation process and/or the dissolution of oxygen into the unoxidized alloy caused the alloy to become embrittled.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Invariant representation of facial expressions for blended expression recognition on unknown subjects

Facial expressions analysis plays an important part in emotion detection. However, having an automatic and non-intrusive system to detect blended facial expression is still a challenging problem, especially when the subject is unknown to the system. Here, we propose a method that adapts to the morphology of the subject and that is based on a new invariant representation of facial expressions. In our system, one expression is defined by its relative position to 8 other expressions. As the mode of representation is relative, we show that the resulting expression space is person-independent. The 8 expressions are synthesized for each unknown subject from plausible distortions. Recognition tasks are performed in this space with a basic algorithm. The experiments have been performed on 22 different blended expressions and on either known or unknown subjects. The recognition results on known subjects demonstrate that the representation is robust to the type of data (shape and/or texture information) and to the dimensionality of the expression space. The recognition results on 22 expressions of unknown subjects show that a dimensionality of the expression space of 4 is enough to outperform traditional methods based on active appearance models and accurately describe an expression.     

An examination of the Internet’s development as a disabling environment in the context of the social model of disability and anti-discrimination legislation in the UK and USA

Research indicates that inaccessible website design persists despite the existence of anti-discrimination legislation and the influence of the social model of disability on policy development. In this paper, the concept of universal access is examined in the light of the social model of disability in relation to both the physical and virtual environments. The manner in which disability is often deemed a design afterthought is highlighted. The need for universal access is then placed alongside a discussion of access to the Internet in relation to an ageing population and people with cognitive difficulties. Subsequently, anti-discrimination provisions are analysed in relation to how they support designers’ focus on an accepted normality to which reasonable adjustments need to be made, rather than the acquisition of full universal access.     

Leadership and justice: Increasing non participating users’ assessment of an IT through passive participation

Allowing users to actively participate in the development and implementation of a new IS is supposed to increase their satisfaction with it. This type of participation, representing aspects relating to distributive and procedural justice, is increasingly impractical in current organizational settings, because many IS are used by thousands of employees and having them involved is impossible. Nonetheless, there are still benefits to be gained in other ways. Extrapolating from interactional justice, we proposed a passive participation method of engaging users. Its effect was tested in a large company in the USA and proved effective. Interactional justice, the perception of fairness in the way that people were treated at an interpersonal level, was found to increase user assessment of the value of their IS. Implications and expansions to interactional justice theory and how this antecedent affects IS implementation are discussed.     

Digital Intuition: Applying Common Sense Using Dimensionality Reduction

Understanding the world we live in requires access to a large amount of background knowledge: the commonsense knowledge that most people have and most computer systems don't. Many of the limitations of artificial intelligence today relate to the problem of acquiring and understanding common sense. The Open Mind Common Sense project began to collect common sense from volunteers on the Internet starting in 2000. The collected information is converted to a semantic network called ConceptNet. Reducing the dimensionality of ConceptNet's graph structure gives a matrix representation called AnalogySpace, which reveals large-scale patterns in the data, smoothes over noise, and predicts new knowledge. Extending this work, we have created a method that uses singular value decomposition to aid in the integration of systems or representations. This technique, called blending, can be harnessed to find and exploit correlations between different resources, enabling commonsense reasoning over a broader domain.     

Conception of a CATV-based MAN

The objective of this paper is to propose an architecture for aCAble TeleVision (CATV) network, capable of supporting two-way transmission. This evolution is necessary for the survival of the CATV industry in an era of deregulation and of the development of the B-ISDN by the telecommunications companies. A communication transactional service is then considered and performance analysis is done under realistic assumptions.     

Shakespeare vs. fletcher: A stylometric analysis by radial basis functions

In this paper we show, for the first time, how Radial Basis Function (RBF) network techniques can be used to explore questions surrounding authorship of historic documents. The paper illustrates the technical and practical aspects of RBF's, using data extracted from works written in the early 17th century by William Shakespeare and his contemporary John Fletcher. We also present benchmark comparisons with other standard techniques for contrast and comparison.David Lowe is Professor of Neural Computing at Aston University, UK. His research interests span from the theoretical aspects of dynamical systems theory and statistical pattern processing, to a wide range of application domains, from financial market analysis (Novel Exploitation of Neural Network Methods in Financial Markets, invited paper,World Conference on Computational Intelligence, vol. VI, pp. 3623–28, 1994) to the artificial nose (Novel Topographic Nonlinear Feature Extraction using Radial Basis Functions for Concentration Coding in the Artificial Nose,3 ^rd IEE International Conference on Artificial Neural Networks, pp. 95–99, Conference Publication number 372, The Institute of Electrical Engineers, 1993).Robert Matthews is a visiting research fellow at Aston University. His research interests include probability, number theory and astronomy. His recent paper inNature (vol. 374, pp. 681–82, 1995) somehow managed to combine all three.