Rapid and non-destructive analysis of apricot fruit quality using FT-near-infrared spectroscopy

A non-destructive optical method based on near-infrared spectroscopy has been used for the evaluation of apricot fruit quality. Diffuse reflectance measurements (800–2500 nm), physical, physiological and biochemical measurements were performed individually on 877 apricot fruits from eight contrasted cultivars harvested at different ripening stages. Relationships between spectral wavelengths and quality attributes were evaluated by application of chemometric techniques based on partial least squares (PLS) on fruit set divided randomly into two groups: 598 fruits for calibration and 279 for validation. Good prediction performance was obtained for soluble solids and titratable acidity with correlation coefficients of 0.92 and 0.89 respectively and root mean square errors of prediction of 0.98% Brix and 3.62 meq 100 g⁻¹ FW respectively. For the other quality traits such as firmness, ethylene, individual sugars and organic acids, the prediction models were not satisfactorily accurate due to the high error of calibration and prediction.     

Release of Bisphenol A from Polycarbonate—A Review

The release of Bisphenol A (BPA) from polycarbonate baby bottles into food and food simulants is reviewed in the perspective of the current intensive discussions on the risks of this substance. Potential factors that have been reported to influence the release of BPA are reviewed. Unlike most polymers polycarbonate is hydrolyzed under alkaline conditions by scale formation, residual alkaline detergents and boiled water. Data suggest that brushing of the bottle did not raise the release of BPA. Claims that used bottles release more BPA than new bottles and that mineral composition of the aqueous food simulant affect release could not be substantiated. There are indications that aminolysis of polycarbonate by milk and ethanolysis of polycarbonate by 50% ethanol might take place under relevant test conditions.

The relatively few migration data following the test conditions of European food contact material legislation, comply with the specific migration limit. Two test conditions were identified that reflect real use and exposure, and might cause higher release of BPA compared to the test conditions of European food contact material legislation. Further detailed studies are necessary to verify whether these two exposure scenarios are more severe.     

Are BPA Substitutes as Obesogenic as BPA?

Metabolic diseases, such as obesity, Type II diabetes and hepatic steatosis, are a significant public health concern affecting more than half a billion people worldwide. The prevalence of these diseases is constantly increasing in developed countries, affecting all age groups. The pathogenesis of metabolic diseases is complex and multifactorial. Inducer factors can either be genetic or linked to a sedentary lifestyle and/or consumption of high-fat and sugar diets. In 2002, a new concept of “environmental obesogens” emerged, suggesting that environmental chemicals could play an active role in the etiology of obesity. Bisphenol A (BPA), a xenoestrogen widely used in the plastic food packaging industry has been shown to affect many physiological functions and has been linked to reproductive, endocrine and metabolic disorders and cancer. Therefore, the widespread use of BPA during the last 30 years could have contributed to the increased incidence of metabolic diseases. BPA was banned in baby bottles in Canada in 2008 and in all food-oriented packaging in France from 1 January 2015. Since the BPA ban, substitutes with a similar structure and properties have been used by industrials even though their toxic potential is unknown. Bisphenol S has mainly replaced BPA in consumer products as reflected by the almost ubiquitous human exposure to this contaminant. This review focuses on the metabolic effects and targets of BPA and recent data, which suggest comparable effects of the structural analogs used as substitutes.     

Prevalence of the Campylobacter multi-drug efflux pump (CmeABC) in Campylobacter spp. Isolated from freshly processed Turkeys

The prevalence of the Campylobacter multi-drug efflux pump (CmeABC) was evaluated in Campylobacter isolates recovered from freshly processed turkeys at two Midwestern processing plants. A total of 94 Campylobacter isolates recovered from processed turkeys were examined using polymerase chain reaction (PCR) to determine the presence of the multi-drug efflux pump genes cmeA, cmeB, and cmeC. Results from this study found that 51% of all isolates tested were positive for CmeABC. 46.6% of these positive isolates were from plant A and 55.1% from plant B. Differences were observed in the prevalence of individual genes found among Campylobacter isolates from each plant. Additional analysis found that among the isolates positive for CmeABC, 85.5% were identified as C. jejuni and 14.5% identified as C. coli. There was a relatively high occurrence of the Campylobacter multi-drug efflux pump genes in Campylobacter spp. recovered from processed turkeys, however, the presence of the genes could not be significantly linked to antimicrobial resistance observed in the test strains and suggests that the CmeABC genes are only one factor associated with antimicrobial resistance in Campylobacter spp.     

Characterisation of lactic acid bacteria isolated from fermented milk "laban"

The technological properties of 96 lactic acid bacteria isolated from Lebanese traditional fermented milk "laban" were characterised. They were classified by phenotypic and biochemical analyses as Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus, thus indicating that laban is a fermented milk similar to yogurt. Most strains of L. bulgaricus (87.5%) exhibited a high acidification activity, whereas strains of streptococci showed low acidification ability. 33.3% of streptococci strains and 25% of lactobacilli strains displayed similar acidification performances as European strains. Results obtained for syneresis, texture and rheological parameters led us to consider that isolated strains were not low polymer-producing strains. Some of them displayed interesting characteristics such as low syneresis and high values for rheological parameters. The major flavour compounds found in pure cultures were acetaldehyde, acetone, 2-butanone, dimethyl disulfide, acetoin, 2,3-butanedione, 2,3-pentanedione, and acetic, hexanoic and butanoic acids. Acetaldehyde (7.4%) and organic acids (48.3%) were mainly produced by L. bulgaricus strains, whereas streptococci cultures contained high relative levels of 2,3-butanedione and acetoin, which represented around 82% of the total flavour compounds. Finally, strains isolated from laban samples exhibited different technological properties than those used in yogurt production, thus conferring specific characteristics to this product.     

Preparation of conjugated linoleic acid from safflower oil

Synthetically prepared mixtures of conjugated linoleic acid (CLA) are widely used in animal and cell culture studies to investigate the potential effects of the Δ9c, 11t-18:2 isomer found in food products from ruminant animals. Alkali isomerization of linoleic acid is a common method used in the synthesis of a mixture of CLA isomers containing predominantly the Δ9c, 11t-18:2 and Δ10t, 12c-18:2 isomers. Some biological activity might also be mediated by the Δ10t, 12c-18:2 isomer. Currently few published methodologies exist describing procedures for the enrichment of these two isomers. A method is described herein to take advantage of an inexpensive oil, safflower oil, for use in synthesis of CLA and a procedure to enrich the Δ10t, 12c-18:2 isomer.     

Maize and pigeon pea sole crop and intercrop nutrient response functions for Tanzania

The development of ecological circular agriculture has been highly encouraged by the Chinese government to recycle agricultural wastes, reduce mineral fertilizer input, and protect the environment. Biogas slurry, a byproduct of biogas engineering developed in rural areas of China, could be used as N fertilizer for crop growth. The field experiments were conducted in 2014 and 2015 to study the plant growth responses and environmental impacts of applying biogas slurry to two-season Zizania aquatica Turcz. growth. The potential factors that restrict the rational use of biogas slurry were also clarified. Mineral N fertilizer can be completely or partly substituted by N fertilizer from biogas slurry to satisfy Z. aquatica plant growth. It was not at the cost of sacrificing yield, dry matter accumulation, N accumulation and physiological N use efficiency in the above-ground parts. However, the growth inhibition occurs when the N quantity in biogas slurry was 2 or 2.7 times higher than that of mineral N fertilizer. Vitamin C in non-shell swollen culms (as edible part) of Z. aquatica significantly increased after biogas slurry application. Biogas slurry application substantially increased the N concentrations, i.e., total N, NH₄ ⁺–N, and NO₃ ^?–N in floodwater and delayed the time to reach national discharge standards. However, biogas slurry application did not affect the N concentrations in percolating water compared with the treatment with mineral N fertilizer only. Applying biogass slurry did not generate potential pollution risks by trace elements (Cu, Zn, Pb, Cr, Cd, As, and Hg) in the non-shell swollen culm and soil, and did not increase the nitrate content in non-shell swollen culm. We found the NH₄ ⁺–N concentration in biogas slurry can account for 77–93% of total N and reflects the N level in biogas slurry to a great degree. Semi-quantitative color-based colorimetric methods possessing simple and fast characteristics should be developed to determine the NH₄ ⁺–N concentration with the purpose of promoting reasonable use of biogas slurry in area of crop cultivation. Otherwise, excessive use of biogas slurry can adversely affect crops and increase environmental risks.     

Delignification of intact biomass and cellulosic coproduct of acid‐catalyzed hydrolysis

The kinetics of acid‐catalyzed hemicellulose removal and also alkaline delignification of oat hull biomass were investigated. All three operational parameters namely, catalyst concentration (0.10–0.55 N H₂SO₄), temperature (110–130°C), and residence time (up to 150 min) affected the efficiency of hemicellulose removal, with 100% of hemicellulose removed by appropriate selection of process parameters. Analysis of delignification kinetics (in the temperature range of 30–100°C) indicated that it can be expressed very well by a two‐phase model for the crude biomass and also for the hemicellulose‐prehydrolyzed material. The application of acid‐catalyzed prehydrolysis improved the capacity of lignin dissolution especially at lower temperatures (30 and 65°C) and accelerated the dissolution of lignin. This acceleration of delignification by prehydrolysis was possible at all levels of temperature in the bulk phase; however, results were more significant at the lower temperatures in the terminal phase. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1783–1791, 2015     

Retention of Eucalyptol,a Natural Volatile Insecticide,in Delivery Systems Based on Hydroxypropyl‐β‐Cyclodextrin and Liposomes

Eucalyptol (Euc) is a natural monoterpene with insecticide effects. Being highly volatile and sensitive to ambient conditions, its encapsulation would enlarge its application. Euc‐loaded conventional liposomes (CL), cyclodextrin/drug inclusion complex, and drug‐in‐cyclodextrin‐in‐liposomes (DCL) are prepared to protect Euc from degradation, reduce its evaporation, and provide its controlled release. The liposomal suspension is freeze‐dried using hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) as cryoprotectant. The liposomes are characterized before and after freeze‐drying. The effect of Euc on the fluidity of liposomal membrane is also examined. A release study of Euc from delivery systems, in powder and reconstituted forms, is performed by multiple head extraction at 60 °C after 6 months of storage at 4 °C. CL and DCL suspensions are homogeneous, show nanometric vesicles size, spherical shape, and negative surface charge before and after freeze‐drying. Moreover, HP‐β‐CD does not affect the fluidity of liposomes. CL formulations present a weak encapsulation for Euc. The loading capacity of eucalyptol in DCL is 38 times higher than that in CL formulation. In addition, freeze‐dried DCL and HP‐β‐CD/Euc inclusion complex show a higher retention of eucalyptol than CL delivery system. Both carrier systems HP‐β‐CD/Euc and Euc‐loaded DCL decrease Euc evaporation and improve its retention. Practical Applications: Eucalyptol is a natural insecticide. It is highly volatile and poorly soluble in water. To enlarge its application, its encapsulation in three delivery systems (conventional liposomes, cyclodextrin/drug inclusion complex, combined system composed of cyclodextrin inclusion complex and liposome) is studied. In this paper it is proved that cyclodextrin/eucalyptol inclusion complex and eucalyptol‐in‐cyclodextrin‐in‐liposome are effective delivery systems for encalyptol encapsulation, retention, and release.     

Contribution of triglycerides from cocoa butter to the physical properties of milkfat fractions

Milkfat was separated into major chainlength fractions by solid-phase extraction. The effect on thermal behavior and texture of replacing both saturated and monounsaturated long-chain triglycerides from milkfat by long-chain monounsaturated triglycerides with an unsaturated fatty acid in thesn-2 position is reported. Increasing proportions of cocoa butter were added to fractions of short-to medium-chain triglycerides (C₂₂−C₄₄) and medium- to long-chain triglycerides (C₃₆−C₄₈) isolated from milkfat. Thermal behavior and texture of the mixtures were measured. Results indicated that long-chain monounsaturated triglycerides from cocoa butter enhanced co-crystallization and co-operative melting and did not induce polymorphic transitions upon crystallization and melting of the fractions. At 4°C, they acted as texture builder if present in proportions of more than 30%, whereas below this level, they acted as texture softeners. The effect of the long-chain monounsaturated triglycerides on the texture of fractions that melt at low temperature could not be predicted from the proportion of solid fat at that temperature. Presented at the 1995 AOCS Annual Meeting & Expo, San Antonio, Texas, May 1995.