Remediation of groundwater contaminated with MTBE and benzene: the potential of vertical-flow soil filter systems

Field investigations on the treatment of MTBE and benzene from contaminated groundwater in pilot or full-scale constructed wetlands are lacking hugely. The aim of this study was to develop a biological treatment technology that can be operated in an economic, reliable and robust mode over a long period of time. Two pilot-scale vertical-flow soil filter eco-technologies, a roughing filter (RF) and a polishing filter (PF) with plants (willows), were operated independently in a single-stage configuration and coupled together in a multi-stage (RF + PF) configuration to investigate the MTBE and benzene removal performances. Both filters were loaded with groundwater from a refinery site contaminated with MTBE and benzene as the main contaminants, with a mean concentration of 2970 ± 816 and 13,966 ± 1998 μg L⁻¹, respectively. Four different hydraulic loading rates (HLRs) with a stepwise increment of 60, 120, 240 and 480 L m⁻² d⁻¹ were applied over a period of 388 days in the single-stage operation. At the highest HLR of 480 L m⁻² d⁻¹, the mean concentrations of MTBE and benzene were found to be 550 ± 133 and 65 ± 123 μg L⁻¹ in the effluent of the RF. In the effluent of the PF system, respective mean MTBE and benzene concentrations of 49 ± 77 and 0.5 ± 0.2 μg L⁻¹ were obtained, which were well below the relevant MTBE and benzene limit values of 200 and 1 μg L⁻¹ for drinking water quality. But a dynamic fluctuation in the effluent MTBE concentration showed a lack of stability in regards to the increase in the measured values by nearly 10%, which were higher than the limit value. Therefore, both (RF + PF) filters were combined in a multi-stage configuration and the combined system proved to be more stable and effective with a highly efficient reduction of the MTBE and benzene concentrations in the effluent. Nearly 70% of MTBE and 98% of benzene were eliminated from the influent groundwater by the first vertical filter (RF) and the remaining amount was almost completely diminished (∼100% reduction) after passing through the second filter (PF), with a mean MTBE and benzene concentration of 5 ± 10 and 0.6 ± 0.2 μg L⁻¹ in the final effluent. The emission rate of volatile organic compounds mass into the air from the systems was less than 1% of the inflow mass loading rate. The results obtained in this study not only demonstrate the feasibility of vertical-flow soil filter systems for treating groundwater contaminated with MTBE and benzene, but can also be considered a major step forward towards their application under full-scale conditions for commercial purposes in the oil and gas industries.     

Comparative evaluation of platforms for parallel Ant Colony Optimization

The rapidly growing field of nature-inspired computing concerns the development and application of algorithms and methods based on biological or physical principles. This approach is particularly compelling for practitioners in high-performance computing, as natural algorithms are often inherently parallel in nature (for example, they may be based on a “swarm”-like model that uses a population of agents to optimize a function). Coupled with rising interest in nature-based algorithms is the growth in heterogenous computing; systems that use more than one kind of processor. We are therefore interested in the performance characteristics of nature-inspired algorithms on a number of different platforms. To this end, we present a new OpenCL-based implementation of the Ant Colony Optimization algorithm, and use it as the basis of extensive experimental tests. We benchmark the algorithm against existing implementations, on a wide variety of hardware platforms, and offer extensive analysis. This work provides rigorous foundations for future investigations of Ant Colony Optimization on high-performance platforms.     

Densification and Thermal Conductivity of AIN Doped with Y2O3, CaO, and Li2O

Small amounts of Li₂O result in sintering in the AIN-Y₂O₃-CaO and AIN-CaO systems at firing temperatures <1600°C. The effect is ascribed to reduction of the liquidus temperature. Furthermore, Li₂O is removed by volatization at temperatures from 1300° to 1600°C, and its content decreases several ppm from the initial 0.3 wt%. Li₂O-doped AIN specimens containing Y₂O₃ and CaO additives are well densified by firing at 1600°C for 6 h, and their thermal conductivity is 135 W^.m^−1.K⁻¹.The effect of Li₂O addition on sintering and thermal conductivity also is discussed through thermo-dynamic considerations.     

My choice,your problem? Mandating IT use in large organisational networks

On the basis of a four‐year exploratory study of a mandatory information systems implementation by an Italian, multibillion‐dollar dairy cooperative with 2200 members, this paper describes how key stakeholders engage in dynamic transformation processes that shape the technology, the users' practices and the organisation itself. In doing so, this study responds to calls for process‐oriented longitudinal explorations and suggests an alternative path of adoption in which the technology becomes the reification of a bi‐directional discourse about the transformation of practices for the entire network of organisations. In presenting this alternative path, this study unveils a five‐phase change process that both altered perceptions of the technology and its possibilities at the same time resolving tensions among the drivers and users of the mandated system. © 2016 John Wiley & Sons Ltd     

The GPU on the simulation of cellular computing models

Membrane Computing is a discipline aiming to abstract formal computing models, called membrane systems or P systems, from the structure and functioning of the living cells as well as from the cooperation of cells in tissues, organs, and other higher order structures. This framework provides polynomial time solutions to NP-complete problems by trading space for time, and whose efficient simulation poses challenges in three different aspects: an intrinsic massively parallelism of P systems, an exponential computational workspace, and a non-intensive floating point nature. In this paper, we analyze the simulation of a family of recognizer P systems with active membranes that solves the Satisfiability problem in linear time on different instances of Graphics Processing Units (GPUs). For an efficient handling of the exponential workspace created by the P systems computation, we enable different data policies to increase memory bandwidth and exploit data locality through tiling and dynamic queues. Parallelism inherent to the target P system is also managed to demonstrate that GPUs offer a valid alternative for high-performance computing at a considerably lower cost. Furthermore, scalability is demonstrated on the way to the largest problem size we were able to run, and considering the new hardware generation from Nvidia, Fermi, for a total speed-up exceeding four orders of magnitude when running our simulations on the Tesla S2050 server.     

Reproductive senescence predicts cognitive decline in aged female monkeys

The present investigation provide evidences from a non-human primate model that naturally occurring menopause predicts a prominent signature of age-related cognitive decline. Young and aged rhesus monkeys were tested on a delayed response (DR) task known to the sensitive to aging, and reproductive status was evaluated according to menstrual cyclicity and urinary hormone profiles. Peri-/postmenopausal monkeys exhibited significant DR impairments relative to either age-matched premenopausal females, or young control subjects. In addition, markers of endocrine decline in the aged animals were selectively correlated with behavioral performance measures that distinguished premenopausal and peri-/postmenopausal monkeys. These results document that menopause is coupled to cognitive decline in the monkey, and they establish a valuable primate model for defining the effects of endocrine aging on brain and behavioral function.     

An assessment of the Spanish national hydrological plan

The paper is a comprehensive review of the Spanish National Hydrological Plan, which proposes to transfer water from the lower part of the Ebro River up to the Levante basins, around 912 km away. The National Hydrological Plan is a conventional, static plan, which focuses primarily on supply management. The plan is based on the explicit assumption that the world will change only incrementally during its entire economic life of 100-200 years. The analysis indicates that much of the increased water demands forecasted are unlikely to materialize due to increasing emphasis on demand management practices, major structural changes in the agricultural sector that will occur by 2020 and the requirements of the Water Directive of the European Union, which must be fulfilled by 2010. Even now, the cost per cubic metre of water delivered at the end of the transfer is nearly twice the cost of desalinated water. The National Hydrological Plan in its present form cannot be justified for economic, environmental and social reasons. In addition, the plan will not be necessary if demand management practices are implemented.     

Mitochondrial Mechanisms in Septic Cardiomyopathy

Sepsis is the manifestation of the immune and inflammatory response to infection that may ultimately result in multi organ failure. Despite the therapeutic strategies that have been used up to now, sepsis and septic shock remain a leading cause of death in critically ill patients. Myocardial dysfunction is a well-described complication of severe sepsis, also referred to as septic cardiomyopathy, which may progress to right and left ventricular pump failure. Many substances and mechanisms seem to be involved in myocardial dysfunction in sepsis, including toxins, cytokines, nitric oxide, complement activation, apoptosis and energy metabolic derangements. Nevertheless, the precise underlying molecular mechanisms as well as their significance in the pathogenesis of septic cardiomyopathy remain incompletely understood. A well-investigated abnormality in septic cardiomyopathy is mitochondrial dysfunction, which likely contributes to cardiac dysfunction by causing myocardial energy depletion. A number of mechanisms have been proposed to cause mitochondrial dysfunction in septic cardiomyopathy, although it remains controversially discussed whether some mechanisms impair mitochondrial function or serve to restore mitochondrial function. The purpose of this review is to discuss mitochondrial mechanisms that may causally contribute to mitochondrial dysfunction and/or may represent adaptive responses to mitochondrial dysfunction in septic cardiomyopathy.     

Luster Pottery from the Thirteenth Century to the Sixteenth Century: A Nanostructured Thin Metallic Film

Luster is a decorative metallic film that was applied on the surface of medieval glazed pottery. It can be obtained via the low-temperature (∼650°C), controlled reduction of copper and silver compounds. In this paper, we show that luster is a thin layered film (200–500 nm thick) that contains metallic spherical nanocrystals dispersed in a silicon-rich matrix and has a metal-free outermost glassy layer that is 10–20 nm thick. Silver nanocrystals seem to be separated from those of copper, forming aggregates 5–100 μm in diameter. This composite structure exhibits optical properties that are dependent on both the particle size and the matrix. Luster is indeed the first reproducible nanostructured thin metallic film that was made by humans.     

Effects of molten aluminum on H13 dies and coatings

The effects of molten aluminum casting alloy A390 on a commercially heat treated H13 die steel and two wear-resistant coatings, Cr₂₃C₆ and TiN, were investigated by an accelerated corrosion test. The H13 steel suffered severe corrosion due to the rapid formation of intermetallic compounds. The formation of multilayer intermetallic compounds and the simultaneous dissociation of the intermetallic compound τ6 (Al₄FeSi) were attributed to the fast dissolution of H13 steels into the melt. This dissolution of the H13 steel was accelerated dramatically by turbulence and an increase in melt temperature. Significant improvement in corrosion resistance was achieved for the H13 steel coated by Cr₂₃C₆ via a pack cementation process.